InStyler InStyler Manuel utilisateur

User Manual

Important Safety Information

WARNINGS: TO REDUCE THE RISK OF SERIOUS

INJURY, READ ALL INSTRUCTIONS AND WARN-

INGS COMPLETELY BEFORE USING THIS PRODUCT

The InStyler®Rotating Iron has been carefully engineered for both effect-

iveness and safety. However, basic safety precautions should always be

followed when using any product, especially when children are present.

READ ALL INSTRUCTIONS BEFORE USING.

KEEP AWAY FROM WATER.

DANGER - As with most electrical appliances, electric parts are

electrically live even when the switch is off.

UNPLUG IT AFTER USE.

To reduce the risk of electric shock:

1. ALWAYS unplug it immediately after using.

2. DO NOT use while bathing or showering.

3. DO NOT place or store InStyler®Rotating Iron where it can fall or be

pulled into a tub, toilet or sink or any other water.

4. DO NOT use InStyler®Rotating Iron near water.

5. DO NOT place in or drop into water or other liquid.

6. If InStyler®Rotating Iron falls into water, DO NOT REACH INTO THE

WATER.Unplug it immediately.

WARNING: TO REDUCE THE RISK OF BURNS, FIRES,

ELECTRICAL SHOCK, DEATH, INJURY OR DAMAGE

TO PROPERTY:

1. Use InStyler®Rotating Iron only for its intended use as described in this

manual. Do not use attachments not recommended by the manufac-

turer.

2. Never operate the InStyler®Rotating Iron if it has a damaged cord or

plug, if it is not working properly, if it has been dropped or damaged

or if it has been dropped into water. If the power supply cord or plug is

damaged, the InStyler®Rotating Iron must be replaced by the manu-

facturer or it’s service agent in order to avoid a hazard.

3. Keep this product and the cord away from water and heated sur-

faces. Do not wrap the cord around the InStyler®Rotating Iron.

4. This product has moving parts. Please keep children and pets away

from this product when in use or when unattended.

5. The InStyler®Rotating Iron should never be left unattended when

plugged in.

6. Never use while sleeping.

7. Never drop or insert any object into any opening or hole.

8. Do not operate outdoors or where aerosol (spray) products are being

used or where oxygen is being administered.

9. Do not use an extension cord with the InStyler®Rotating Iron.

10. The InStyler®barrel and unit bottom may be hot during use. Do not

allow eyes or skin to touch the heated surfaces.

11. Do not place InStyler®on any unprotected surface while it is operat-

ing or cooling down after use, except for the InStyler®

carrier/mat provided.

12. Do not operate with a voltage converter.

13. This product is designed for hair styling. Do not use for any other

purpose.

14. This product is a personal care device and is not intended for com-

mercial use.

15. Do not use this product if any parts become damaged. Inspect the

InStyler®product prior to beginning hair styling to ensure all parts are

secure in their place.

16. Do not subject this product to excessive force or shock that may result

in malfunction, shorter life span or distorted parts.

17. Do not tamper with this product’s components. Doing so may cause

unnecessary damage. This product contains no user-serviceable

parts.

18. Do not use liquid cleaners, aerosol cleaners, or any cleaner contain-

ing alcohol, detergent, abrasive or corrosive materials.

19. The InStyler®Rotating Iron should be used only on clean and dry hair.

IMPORTANT: The InStyler®should never be used with any type of

synthetic hair extension. If you do have extensions and wish to use the

InStyler®, make sure they are real human hair extensions. If your extensions

are sewn in, you can use your InStyler®up to the scalp. If your extensions

are glued in, make sure you start with your InStyler®below the glue.

SAVE THESE INSTRUCTIONS

KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE

REFERENCE AND MAKE SURE ANYONE WHO USES

THIS PRODUCT ALSO READS THIS MANUAL

READ ALL INSTRUCTIONS BEFORE USING YOUR IN-

STYLER ROTATING IRON NO ASSEMBLY REQUIRED

The InStyler®Rotating Iron is for household use only. The InStyler®Rotating

Iron has a polarised plug (one blade is wider than the other). As a safety

feature, this plug will ﬁt in a polarised outlet only one way. If the plug

does not fully ﬁt in the outlet, reverse the plug. If it still does not ﬁt, contact

a qualiﬁed electrician. Do not attempt to defeat this safety measure.

InStyler®Features

UOn/Off Button

UProfessional Swivel Cord

ULED indicators for temperature and rotation settings

UHot Rotating Barrel (90 to 140 RPM)

UMatching heated brush for fast, even heat distribution

UAuto shut off – The InStyler® Rotating Iron will automatically shut off

after 45 minutes of inactivity.

U3 Temperature Settings

Hi 3 Bars, 196 ˚C For thick, coarse hair

Med 2 Bars, 157 ˚C For thin to medium-textured hair

Low 1 Bar, 140 ˚C For ﬁne, thin hair

Off No Bar

UVoltage: 220 Vac/50Hz

UPower: 45 W

InStyler®Rotating Iron

Easy Start-Up

1. Plug the InStyler®into an electrical outlet.

2. Push once for high heat (3 Bars, 196˚C) for thick, coarse hair.

3. Push a second time for medium heat (2 Bars, 157˚C) for thin to

medium textured hair.

4. Push a third time for low heat (1 Bar, 140˚C) for thin, ﬁne hair.

5. Push a fourth time to turn the InStyler®Rotating Iron off (LED will

turn off – NO bars)

6. The LED bars will ﬂash while reaching heat; once the temperature

is reached the LED will stay lit.

InStyler®Introduction and

Getting Started

Congratulations! You’ve just chosen the most versatile hair

styling product you have ever used. Whether you are looking for a sleek,

straightened style, a glamorous curled look, or anything in between, the

InStyler®is the one tool you need for dynamic and fabulous looks every

day of the year!

Getting Started...

“Go Slowly!”

UBecome familiar with how the InStyler®works with your hair. Your instinct

will be to glide the InStyler®through hair quickly, but you will get much

better results by going slowly. Even though you’re moving the unit slower,

you will still get results faster than using a curling iron or a ﬂat iron. The

unique rotating barrel does so much of the work for you.

UÊExperiment with it and be creative. You will quickly see what this in-

novative tool can do. The styling tips on the following pages will help

give you some ideas of what is possible. You will become more efﬁcient

at styling your hair each time you use your InStyler®.

NOTE: It is recommended that you use your InStyler®with the included

Thermal Shield, to help prevent burns while you are getting used to this

unique new hot styling tool.

To attach, snap the Thermal Shield onto the side of the unit directly under

the ring below the barrel.

Rotate the Thermal Shield until tabs are seated in the indentations on the

body of the InStyler®, and the Thermal Shield is facing out.

Once it is snapped in place, you can use your InStyler®as you normally

would.

To remove the Thermal Shield, ﬁrmly grab the Thermal Shield, making

sure the barrel of the unit is cool. Twist to unseat it and pull to remove.

Allow the InStyler®to cool before storing.It’s that simple!

NOTE: It is important to keep your InStyler®clean, as hair product build-up

can accumulate on the barrel and bristles. With the unit unplugged, wipe

the outside surface only with a lightly damp cloth. Bristles can be lightly

scrubbed if necessary. Make sure the InStyler®is completely dry before

plugging into any power source. Please see page 20 of this manual for

more detailed instructions on cleaning.

Hair Types

The way you use your InStyler®depends on what type of hair you have.

You’ll get the most out of your InStyler®if you use the techniques best suited

to your hair type.

The three main types of hair are:

UFine - Set the InStyler®at Low to Medium heat setting. With ﬁne hair,

you should only need 1 to 2 passes with the InStyler®to achieve your

desired results.

UMedium or Normal - Set your InStyler®to the Medium to High heat

setting. You should only need 1 to 2 passes with the InStyler®to

achieve your desired results.

UThick or Coarse - Set your InStyler®at the highest heat setting and style

as desired. With coarse hair, 2 to 3 passes with the InStyler®should

be enough to set your style. Don’t rush! Remember to Take your time

and move slowly through the hair.

NOTE: For colour treated hair, we also recommend a lightweight shampoo

and a light leave-in conditioner.

- Volumising products can be used to hold the style.

- To hold your style, end with a professional light ﬁnishing spray.

- Although the InStyler®uses less heat than other hair appliances, we

recommend using thermal protectant products before use.

The Basics - Preparation For All Hair Types

Before using your InStyler®, you should always start with clean and dry

hair.

UYour hair should also be detangled ﬁrst with a brush, and all sections

should be combed out for optimal results and shine.

USections of hair to be styled should be no wider than the length of the

InStyler®barrel. We recommend starting with1 to 3 inch sections at

a time for whichever style you want to achieve.

UStyle your under layers of hair ﬁrst. After under layers are com-

pleted, style your top layers.

UYou may use any salon quality styling product with your InStyler®,

however we do not recommend the use of any oil-based products

with your InStyler®.

UFor better hold, you can use your favorite light styling spray on each

section of hair before using your InStyler®.

UGo Slowly! The most important lesson is to glide the InStyler®slowly.

Don’t worry if you see “steam” coming off your hair when you use

your InStyler®. This is not damaging your hair, it is simply excess prod-

uct that is evaporating from the hair shaft.

Sectioning Hair

To achieve the style you want with your InStyler®, it is important to know

how to properly section the hair you want to style.

UWith longer hair, clip up your top layers of hair ﬁrst, and begin by

sectioning and styling your under layers of hair.

UFor best results, do not use ﬁngers to gather a section of hair. You

can gather a much “cleaner” section with a sectioning comb.

UStart with 1 to 3 inch sections working around each side of the head

to the nape of the neck.

UWhen styling hair, grip the InStyler®ﬁrmly but not too tightly. Let hair

glide through it. Let the InStyler®do the work.

InStyler®Techniques

For even more styles and techniques, please see the InStyler®Look Book.

1. Three Levels of Volume

Depending on what style you want to achieve, there are different ways to

gather a section of hair.

Use a horizontal section of hair for general straightening and soft curls.

For extra body and volume, use a vertical section of hair.

For even more body and volume, use a “square” section of hair. Use a

sectioning comb to make a square shaped section of hair.

Table des matières

Autres manuels InStyler Fer à coiffer

InStyler

InStyler STRAIGHT UP Manuel utilisateur

InStyler

InStyler Tulip Manuel utilisateur

InStyler

InStyler Cerasilk Manuel utilisateur

InStyler

InStyler Straight Away Manuel utilisateur

InStyler

InStyler Straight Away Manuel utilisateur

InStyler

InStyler titanium Manuel utilisateur

InStyler

InStyler 3/4 in. (19mm) InStyle Manuel utilisateur

InStyler

InStyler GLOSSIE Manuel utilisateur

InStyler

InStyler MAX Manuel utilisateur

InStyler

InStyler TopStyler Manuel utilisateur

InStyler

InStyler FREESTYLE MAX 00710 Manuel utilisateur

InStyler

InStyler 1 in. Manuel utilisateur

InStyler

InStyler 32mm Rotating Iron Manuel utilisateur

InStyler

InStyler WET to DRY MAX Manuel utilisateur

InStyler

InStyler Rotating Iron Manuel utilisateur

InStyler

InStyler 19mm Manuel utilisateur

Manuels Fer à coiffer populaires d'autres marques

Vitek

Vitek VT-2505 Manuel utilisateur

Morphy Richards

Morphy Richards IB22063 Fiche d'information produit

TZS First AUSTRIA

TZS First AUSTRIA Ida FA-5670-3 Manuel utilisateur

izzy

izzy LN-112 Manuel utilisateur

Vitek

Vitek VT-2310 Manuel utilisateur

Okoia

Okoia HS23 Manuel utilisateur

Arzum

Arzum TRENDCARE AR 5042 Manuel utilisateur

SOLAC

SOLAC PP7251 Manuel utilisateur

VS Sassoon

VS Sassoon VSLE330A Manuel utilisateur

Philips

Philips HP8339 Manuel utilisateur

Philips

Philips HP4666 Manuel utilisateur

Vitek

Vitek VT-8291 Manuel utilisateur

VS Sassoon

VS Sassoon miniPRO Wave Envy Manuel utilisateur

Arzum

Arzum SUPERSTAR TOUCH Manuel utilisateur

Remington

Remington S2880ZBA Manuel utilisateur

cecotec

cecotec Bamba RitualCare 900 Wet&Dry Max Manuel utilisateur

Philips

Philips HPS950 Manuel utilisateur

Andis

Andis Gold CSI-1E Manuel utilisateur