10
Channels
Tree: The Tree gives visual feedback of the Internal Biofeedback Sensor
and the signals present at each CV Output. With the bloom of each
colour, a new control voltage and gate duration is generated at the
corresponding outputs. .
CV Output: The CV Outputs generate control voltages based on the
activity of the Internal Biofeedback Sensor.
• Each CV Output corresponds to a different colour of the Tree.
• If the top of the Tree illuminates red, additional coin toss logic
determines the possibility of a higher rate of control voltage activity.
This red illumination can be thought of as a High Activity Indicator.
• From left to right, the CV Outputs correspond to the Blue, Green,
Yellow, and Orange illumination of the Tree from bottom to top.
• Output range: 0V - 5V.
Gate Output: The Gate Outputs generate gate signals with
random durations.
• Each Gate Output corresponds to a different colour of the Tree.
• From left to right, the Gate Outputs correspond to the Blue, Green,
Yellow, and Orange illumination of the Tree from bottom to top.
• If the top of the Tree illuminates red, additional coin toss logic
determines the possibility of shorter gate durations. This red
illumination can be thought of as a High Activity Indicator.
• Duration ranges: 100ms - 3.5s.
• Output voltage: 5V.
Slew: The Slew knobs set the amount of time it takes for the control voltage
signal to reach its final voltage level.
• This is also known as Portamento, Slide, or Glide.
• The Slew knobs individually affect the corresponding control voltage
outputs on a per channel basis.
