ELECTRICAL
CODES
All electrical work must be performed by a licensed electrician and conform
to all national, state, and local codes. Applicable national codes, include
but not limited to the following:
•
In Australia, AS3000 Wiring Rules
and/or any other local and national installation codes.
GENERAL SAFETY GUIDELINES
Please examine the heat pump carefully and confirm whether the product has
arrived in a good shape, with fixed screws, and a full range of accessories
after you receive the product.
Unpack the heat pump before formally installation by cutting the packing
tape, taking off the packaging, and removing the bottom wooden pallet.
Plastic packing bags and tapes should be properly handled, and do not let
children play with them.
If you suspect a refrigerant leakage, remove or extinguish all open flames
around the equipment.
Installation and maintenance of this product must be carried out ina well-
ventilated area.
If a power failure occurs during operation, the heat pump will automatically
restart when power isrestored.
When the heat pump does not operate properly or reports a fault code, stop
operation and contact service personnel.
Ensure you connect toa circuit that isprotected by a type B RCD.
