INNOVAPLAS FIESTA Manuel utilisateur
Sand
50 lbs
FIESTA / OPERA ASSEMBLY WITH CLASSIC LADDER
(not included)
Sand
Tools Required
(not included)
A
Contents of Fiesta box # 1001 or Opera # 1016
x2
x2
x2
x2 x4
x8
115-014 (3/4 in.)
x8
105-012
105-005
x8 x8
115-010
1) Insert the four
posts into the post
ends and secure
them in place with
the screws provided.
2) Insert the platform
over the 2 rear posts.
Do not secure yet.
3) Insert the large
handrails securing them
with the screws
provided.
Security strap
x2
x2
105-012
105-005
x2 x2
115-014 (3/4 in.)
x18
115-010
115-018 (2 1/2 in.)
x2
HARDWARE BAG 140-004
CABLE LOCK
***PADLOCK REQUIRED
Contents of the ladder box SKU # 6001
A weather resistant padlock is
recommended. Maximum functional
width is 1/4 inch.
x8
105-012
105-005
x8 x8
115-010
115-015 (1 1/2 in.)
x8
x12
115-014 (3/4 in.)
115-018 (2 1/2 in.)
x2
HARDWARE BAG 140-008
x2
PG. 1
REV. 11/10/10
x2
x2
WARNING
Do not dive or jump from step or ladder.
Use BATTERY operated tools to avoid electric shocks.
Install step on flat surface, following the manufacturers
instructions.
Remove step from pool during freezing climate season.
Manufacturer cannot be held responsible for injuries caused
by abusive use of product.
Ask your city about specific regulations that apply to your
above-ground pool and ladder.
Fiesta-Classic shown.
Instructions also compatible for Opera-Classic
370 Lajeunesse St,
St-Jérome (Québec),
Canada J7Y4E5
G
BC
D
E
F
REV. 11/10/10
Sand
50 lbs
1) Insert the sandbag
under the first step.
MANUFACTURER
WARRANTY
1 Year on the step
and ladder.
1 year on the hardware.
1) Slowly submerge the
Step in the pool. Make
sure you do not damage
the liner in the process.
1) Install the four
post covers.
2) Slide the two small posts
through the platform and small
handrails. Secure the handrails
to the posts using the screws
provided. Do not secure
platform.
x2
105-012
105-005
x2 x2
115-010
115-014
(3/4 in.)
x18
To prevent a pool liner
puncture, keep a minimum
of 1" inch gap between the
pool liner and the rear
underside of the step.
WARNING
1) Slowly submerge the
Step in the pool. Make
sure you do not damage
the liner in the process.
Security strap
x2
2) Once the step is in
the pool secure the
platform to the top seat
(see illustration) using
the two straps provided.
115-018 (2 1/2 in.)
x2
OPTIONAL:
Once the pool step has been
completely assembled and secured
to the pool, attach the 2 screws
supplied through the platform to the
top seat of your pool to provided a
more rigid assembly.
PG. 2
SWING THE LADDER UP
AND LOCK IN PLACE
WHEN THE POOL IS NOT
IN USE TO PREVENT
DROWNING AND
UNAUTHORIZED ENTRY.
WARNING
CABLE LOCK
***PADLOCK REQUIRED
x1
1) Assemble the two posts
through the platform and
small handrails. Slide the
pivot blocks onto the posts
and secure at 40 1/4
inches from the bottom of
the posts with screws
provided.
2) Attach the ladder to the
pivot blocks with the bolts,
washers and nuts
provided.
3) Finish the assembly by
securing the platform and
ladder base to the posts
with the screws provided.
40 1/4''
x4
115-014 (3/4 IN.)
370 Lajeunesse St,
St-Jérome (Québec),
Canada J7Y4E5
Ce manuel convient aux modèles suivants
4
Autres manuels INNOVAPLAS Échelle
INNOVAPLAS
INNOVAPLAS FIESTA 1001-N-C-S Manuel utilisateur
INNOVAPLAS
INNOVAPLAS Lumi-O MAJESTIC 8005 Manuel utilisateur
INNOVAPLAS
INNOVAPLAS Lumi-O ROYAL ENTRANCE II Manuel utilisateur
INNOVAPLAS
INNOVAPLAS Lumi-O H2O 7000 Manuel utilisateur
INNOVAPLAS
INNOVAPLAS Lumi-O ELEGANT 1002-HRK Manuel utilisateur
INNOVAPLAS
INNOVAPLAS Lumi-o BILTMOR DECK 5050 Manuel utilisateur
INNOVAPLAS
INNOVAPLAS BILTMOR 5001 Manuel utilisateur
INNOVAPLAS
INNOVAPLAS BILTMOR 5015 Manuel utilisateur
INNOVAPLAS
INNOVAPLAS Lumi-O BILTMOR 5005 Manuel utilisateur
INNOVAPLAS
INNOVAPLAS BILTMOR 5015 Manuel utilisateur
