eClick installation instructions
Safety information
The eClick must be installed by qualified,
specialised electricians. In general,
priority must be given to the accident
prevention regulations, the safety rules
applying nationwide to the specific
operations, and the medical regulations
at the workplace.
The product can only be
commissioned free of faults if this
document is observed. These installation
instructions constitute an integral
part of the product and must be
available to the installers even after
the installation. Therefore, keep this
document in a safe place even after
installation.
Note in addition that safety is
ensured only when the devices in
question are stored, installed, used,
serviced, and, if necessary, disassembled
and disposed of properly as described
in this document.
• Before installing and using this
product, please read the provided
documentation to familiarise yourself
with the safety regulations and other
information.
• This product was developed
and tested in compliance with
international standards.
• This product may be used exclusively
for its intended purpose.
• This product must be installed by
qualified personnel exclusively.
• This product is maintenance-free
and cannot be repaired on site.
• Incorrect installation may entail risks
for the user.
• This product is used in combination
with a power source.
• Make sure that the product is only
used in proper operating conditions.
• Make sure that the power supply to
this product is connected properly
to a fuse box with RCD and circuit
breaker as described below in this
document.
• The selected RCD and circuit breaker
must be suitable for the electrical
connection and installed in an
upstream fuse box.
• Make sure that the fitted RCD is
serviced at the intervals specified
by the manufacturer
.
Before installing, check the
specifications under the grid
connection regulations, the
technical connection requirements,
and those issued by the utility
with respective national requirements
and specifically follow the compulsory
registration, approval, and listing
procedures.
Product subject to modification
without prior notice. This document
might not contain the latest changes
to the product’s specifications or
processes described herein.
Danger to life and limb
Warning of electrical voltage!
DANGER
Considerable risk of injury/damage to property
IMPORTANT! There is a risk of injury or damage to property!
The eClick must be installed by qualified, specialised electricians.
IMPORTANT
Information on optimising the application
Observing this information can improve the product’s application.
NOTE
