Ink Bird IHC-200-WIFI Manuel utilisateur
尺寸：80x160mm
类型：翻书
IHC-200-WIFI
Humidity Controller
(English)
%RH
%RH
SV
PV
Contents
Introduction01 -------------------04
Product Features02 ---------------05
Specifications03 -----------------05
Wi-Fi Connection04 --------------06
Settings05 ------------------------11
Basic Operations06 ---------------13
Sensor Fault Alarm07 ------------17
Important Safeguards08 ----------17
Warranty09 -----------------------18
Introduction
US Sockets
EU Sockets
UK Sockets
AU Sockets
01
ʏ PV: In the normal mode, it displays current
humidity; in the setting mode, it displays menu
code.
ʐ SV: In the normal mode, it displays the
setting humidity value; in the setting mode, it
displays the setting value.
ʑ Red Indicator Light: The indicator light will
turn red when the humidification output is on
and the indicator light will turn off when the
humidification output is off.
ʒʓGreen Indicator Light: The indicator light
will turn green when the dehumidification
output is on and the indicator light will turn off
when the humidification output is off. If the
green indicator light blinks, the device is in the
mode of dehumidification delay protection
state and the humidification output is off.
ʔ WORK1: Humidification Output Socket.
ʕ WORK2: Dehumidification Output Socket.
ʖ Setting Button( ), Increase Button( ),
Decrease Button( ): More details on Settings.
WIFI
SET
%RH
%RH
ʗʘ
ʒ
ʔ
ʓ
ʙ
ʕʖ
ʗʘ
ʗʘ
ʗʘ
4
Product Features
02
Plug-n-Play
Dual Relay Output: Support both humidifying
equipment and dehumidifying equipment at
the same time.
Display Screens: Display set humidity value
and the measured humidity value at the
same time.
Support Humidity Calibration
Support Dehumidification Control Delay
Protection
Settable High/Low Humidity Alarm
Probe Fault Alarm
Wi-Fi Smart App
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Specifications
03
;TQYFLJ;FH-_
Current: 10A
Maximum Power:
1200W (120Vac), 2200W (220Vac)
-ZRNINY^2JFXZWJRJSY7FSLJc7-
Humidity Display Accuracy: 0.1%RH
7JQFYN[J-ZRNINY^&HHZWFH^YT7-
Typ: ±3%RH, Max: ±5%RH
Display Unit: %RH
Operating Ambient Temperature:
өcөӬcӬ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
5
Wi-Fi Connection
04
8YTWFLJ9JRUJWFYZWJөcөӬcӬ
8YTWFLJ-ZRNINY^c7-
(not frozen or dewed)
Warranty:
Controller: 2 years
Probe: 1 year
Ɣ
Ɣ
Ɣ
Scan QR code to download
6
Pro APP
4.2 Connect to your phone
ʒRegister before using the Pro app. Select
your Country/Region, enter your
e-mail, then a verification code will be sent
to your mailbox, enter it to confirm your
identity and the registration is done.
4.1 Download Pro App
Search the keyword “Pro App” in Appstore r
Google Play to get the app, or you can scan
the following QR code directly to download
and install the app.
ʔTap “+” or “add device” button in home
page of the APP to add the device.
ʕPress and hold the button for 2
seconds to reset the Wi-Fi when the
controller is under normal working state.
The controller will enter the Smartconfig
configuration state by default. You can short
press the button to switch between the
Smartconfig configuration mode and the AP
mode.
As the WIFI module need time for data
processing, so it will take about 5 seconds
to display the corresponding LED symbol
and state if the Wi-Fi states change.
4.3 Quick Connection
(1) Plug the device in the socket and make
ʓ Then press “Add Home” button to create
your home.
WIFI
WIFI
7
sure that the device is in the Smartconfig
state (the LED symbol is flashing rapidly,
interval flashing 250ms).
(2) Check if the LED symbol is blinking
rapidly and confirm on your app if it is, then
enter your Wi-Fi password to connect to
wireless network, click “Confirm” to connect
the device.
3TYJ9MJIJ[NHJTSQ^XZUUTWYX,-_
Wi-Fi router.
4.4 Connect the device in AP mode
ʒPlug the device in the socket and make
sure that the device is in the AP
Configuration State (the LED symbol is
flashing slowly, interval flashing 1500ms).
ʓ Click “Confirm indicator slowly blink” and
then select Wi-Fi network, enter Wi-Fi
password, click “Confirm” to enter
8
connection process.
ʔ Press “Connect now” and it will go to your
WLAN Setting interface on your smart
phone, select the “SmartLife-XXXX” to
directly connect to the router without
putting in password.
ʕ Go back to the app to enter into the
automatic connection interface.
ʖ Click “Done” after adding device
successfully and enter into the device
controlling interface.
ʗ In the humidity control mode, users can
do some control function settings with the
app.
9
Autres manuels pour IHC-200-WIFI
1
Table des matières
Langues :
Autres manuels Ink Bird Contrôleurs
Ink Bird
Ink Bird IIC-800-WIFI Manuel utilisateur
Ink Bird
Ink Bird IHC-200 Manuel utilisateur
Ink Bird
Ink Bird ITC-100 Manuel utilisateur
Ink Bird
Ink Bird ITC-1000F Manuel utilisateur
Ink Bird
Ink Bird ITC-306T-WIFI Manuel utilisateur
Ink Bird
Ink Bird C929-A Manuel utilisateur
Ink Bird
Ink Bird Hioazo HO-SC-6W Manuel utilisateur
Ink Bird
Ink Bird Hioazo HO-SC-8W Manuel utilisateur
Ink Bird
Ink Bird ITC-100 Manuel utilisateur
Ink Bird
Ink Bird ITC-308-WIFI Manuel utilisateur
