ING SPEEDBIRD mini I20E Manuel utilisateur
Table of Contents
Drone
Controller
Drone
Drone
Drone
Controller
Controller
Drone
Drone
IMPORTANT: Check your license requirements with the FAA before you fly.
https://www.faa.gov/uas/getting_started/register_drone/
SPEEDBIRD mini I20E is equipped with optical flow and GPS and is capable of hovering and flying steadily
indoors and outdoors. It is equipped with automatic return home and easy-to-use intelligent flight, such
as Orbit Flight, Follow-Me and Waypoint Flight. It can shoot 2.5K HD video. The drone has functional
buttons that can control various operations and settings of the drone and camera. The App will display
real time HD images and flight information. Always put safety first when flying. Enjoy your ING
SPEEDBIRD mini I20E.
Drone
Arms
Carefully unfold the arms in the direction of the arrows below.
Install Drone’s Battery
drone
Before installing the battery for flight, make certain it is fully charged. push the battery into the drone’s
battery cavity, make sure that the battery is installed correctly.
Controller
B
mini I20E User Guide
Please purchase seperately
ensure
M
G
F
S
S
I
L
OFF ON
mini I20E User Guide
P
J
J
S
S
D
K
L
T
C
H
/S S
W
O
K
KR H
H
U
V
to
-On/Off
Switch
Drone
I20E.
In GPS Mode, the drone achieves precise hovering by receiving GPS signals. If the GPS signal is
weak, the drone will enter Fix-Altitude Mode or Optical Flow Position Mode.(Please refer to the status
bar for specific status in the App.)
When the GPS signal is weak, please land to in a safe place immediately to avoid an accidents. At the
same time, please avoid flying in an area with a weak GPS signal or a narrow space to avoid accidents.
GPS Mode
The maximum height of the Optical Flow Position is 10 ft. If you exceed this height, the drone will lose
control.
Optical Flow Position Mode
If you cannot receive the GPS signal or if the GPS is turned off, the drone will enter the Optical Flow Position
mode
If you cannot receive the GPS signal or if the GPS is turned off, the drone will enter the Optical Flow Position
mode. In this mode, the drone can hover stably by using the optical flow system.
minion the
If there is no GSP signal, the flight altitude limit is 3 meters.
Status Indicator Lights on Drone
drone
Status Indicator Light Definitions
Drone
Drone
Drone
Drone
Drone has has
Drone controller
C
B
G
mini I20E User Guide
M
Iflash yellow quickly.
Iflash green quickly.
yellow
Drone
yellow
Drone
yellow
I
green.
I
Indicator light flash red slowly.
Indicator light flash red quickly.
R
s
R
s
R
s
R
s
mini I20E User Guide
Mini I20E is equipped with a Auto Return Home function. It includes One key Return to Home , Return Home
in low battery power and Return Home when signal has been lost. Under good GPS signal, drone will
automatically fly back to home position and land automatically after pressing Return Home key.
f
c
When this occurs all indicator lights change from yellow
to green.
To cancel return-home, press again and the drone will return to flight control mode.
2. When the red indicator lights flash quickly, the Power icon on the controller shows and a continuous
beeping sound is emitted; if the flight altitude or distance is greater than 49 ft, the drone will return to the
home point automatically.
Return Home Beyond Control Distance
Return Home in Low Power
When the red indicator lights flash slowly, the Power icon on the controller shows ; if the flight
altitude is between 98 and 328 ft, the drone will return to the home point automatically.
Notes on Return Home Mode:
Please be aware that when the drone is in Return Home Mode, it will fly straight to the home
point and will not be able to avoid obstacles.
altitude can be set 49.2~65.6ft
When the GPS signal is weak or not working, or has been interrupted for more than 6 seconds,
the drone will not be able to return to the home point. It will descend slowly until landing, then it
will lock.
One Key to Return Home
of the
controller pushing
to regain control of the drone.
49.2ft
49.2ft
mini I20E User Guide
Usage Requirements of Optical Flow Positioning
Please note, Optical Flow Positioning works when flying at altitude below 9.8ft.
Measurement accuracy of the Optical Flow System (OFS) is easily affected by light intensity
and texture of the surface. If the OPS fails the drone will automatically switch to fixed altitude
mode. Below is a list of conditions that can cause failure to the OFS:
1. Flying fast at low altitude (below 16ft).
2. Flying over monochrome surfaces such as pure black, pure white, pure red etc.
3. Flying over surfaces with strong reflections.
4. Flying over water or transparent surfaces.
drone
mini I20E User Guide
5. Flying over moving objects such as upside of clouds, swaying trees or grasses, etc.
6. Flying over surfaces with rapid light changes.
7. Flying over extremely dark surfaces (Lux<10) or extremely bright surfaces (Lux>10,000).
8. Flying over very smooth surfaces.
9. Flying over surfaces with significant repeated textures such as same color brick.
10. Surfaces that are angled over 30 degrees.
For best results with OPS, maintains moderate drone flying speed without rapid changes.
Recommended speeds:
Ensure the OPS lens is clear.
OPS Check List & Requirements
The OPS is only effective in altitude less than 9.8ft.
The surface area must have sufficient light source and rich textured ground.
In dim light conditions, turn on the Optical Flow Fill Light.
Altitude Max speed
1
2
<16ft./s
<26ft./s
Table des matières
