InFocus SplashX Manuel utilisateur

Page 1of 4

009-1650-00

To determine your projector’s

resolution: Select the Advanced Menu >

Status/Service > Projector Info submenu

in the projector OSD menu and review

Native Resolution.

SplashX

Use these instructions to load a custom image onto your SplashX compatible projector, such as

your company or school logo. The custom image can be used as a search screen or blank

screen image.

Required equipment

•USB-A to USB-B cable

•Windows®computer

•SplashX-compatible projector

•Power cord

Source image specifications

Supported formats

BMP (≤24 bit color depth), JPEG, or PNG.

Image resolution

The source image should be the same size as the

target projector.

SplashX compatibility

Windows XP, Vista, 7, 8, 10

Before you begin

Use these instructions to turn off Power Saving Mode in your projector.

IN1116/IN1118HD note: You cannot turn off Power Saving Mode on the IN1116 and IN1118HD

projectors. If you have an IN1116 or IN1118HD projector, please proceed to the next section.

1. Turn on the projector.

2. Press the Menu button on the remote or projector keypad.

3. Navigate to the Advanced Menu > Setup > Power submenu.

4. Change the Power Saving Mode to Off.

5. Turn the projector off.

Page 2of 4

009-1650-00

Setup and installation

1. Connect your projector to the computer using a USB cable (either a USB-A to USB-B or

USB-A to USB Micro-B depending on your projector).

2. Connect a power cord to your projector.

3. If you have an IN1116 or IN1118HD projector, turn on the projector. Otherwise do not

turn on your projector.

4. Download the SplashX.exe application from www.infocus.com/support and save it to

your computer.

5. Unzip the SplashX file.

6. Double-click the SplashX executable file (.exe).

7. If you see a Windows security warning, click Run.

8. Click the Browse (…) button and navigate to the image you wish to upload.

Page 3of 4

009-1650-00

9. Click Start and wait patiently. Your image will begin to display in the SplashX window.

Note: If this is the first time you have used SplashX, it will take several minutes for your

image to load.

10. When the process is complete, the image will be fully displayed in the SplashX window

and the message “Done” will appear in the lower left of the screen. Your custom image is

now the default Search Screen image.

11. To assign your custom image as the projector’s Blank Screen:

a. Turn on the projector and click the Menu button on the projector keypad.

b. Navigate to the Advanced Menu > Setup > Keypad/Remote submenu.

c. Navigate to Blank Key and select User.

Page 4of 4

009-1650-00

Erasing the custom image

1. Follow the Setup and installation instructions above, but click Erase when the SplashX

window appears.

2. Turn off the projector and disconnect it from power.

3. Reconnect the power cord and turn on the projector.

4. Your custom image is now deleted from the projector.

Troubleshooting

If the message “No found projector” appears:

1. Verify that your image is the same size as the projector resolution and is either a BMP

(<24 bit color depth), JPEG, or PNG

2. Verify that your projector is SplashX compatible and that your computer uses a

compatible Windows operating system.

3. Click Start again. Wait several minutes.

4. If you continue to experience issues, contact InFocus Support at

www.infocus.com/support.

Table des matières

Autres manuels InFocus Projecteur

InFocus

InFocus LP 650 Manuel utilisateur

InFocus

InFocus LitePro 580 Manuel utilisateur

InFocus

InFocus IN1116 Manuel utilisateur

InFocus

InFocus LP 840 Guide de configuration rapide

InFocus

InFocus IN3124 Manuel utilisateur

InFocus

InFocus LP335 DRAGONFLY Manuel utilisateur

InFocus

InFocus LP 600 Manuel utilisateur

InFocus

InFocus Proxima DP6850 Manuel utilisateur

InFocus

InFocus IN24+EP Manuel utilisateur

InFocus

InFocus LP 725 Manuel utilisateur

InFocus

InFocus LP500 Manuel

InFocus

InFocus C105 Manuel d'utilisation et d'entretien

InFocus

InFocus X2 multi-use perfomance Manuel utilisateur

InFocus

InFocus LP860 Manuel d'installation

InFocus

InFocus X3 Manuel utilisateur

InFocus

InFocus in122 Manuel utilisateur

InFocus

InFocus X2 multi-use perfomance Manuel utilisateur

InFocus

InFocus LP335 DRAGONFLY Manuel utilisateur

InFocus

InFocus IN5100 series Manuel utilisateur

InFocus

InFocus X17 Manuel utilisateur

InFocus

InFocus Work Big IN1100 Manuel utilisateur

InFocus

InFocus INV30 Manuel utilisateur

InFocus

InFocus CEILING MOUNT LP 1000 SERIES Guide rapide

InFocus

InFocus IN134UST Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur