infobit iSound PA20 Manuel utilisateur
iSound PA20
Dual 20W Audio Amplifier
Dual 20W Audio Amplfier
www.infobitav.com info@infobitav.com
Preface
Read this user manual carefully before using this product. Pictures shown in this
manual is for reference only, different model and specifications are subject to real
product.
This manual is only for operation instruction only, not for any maintenance usage. The
functions described in this version are updated till April, 2020. Any changes of functions
and parameters since then will be informed separately. Please refer to the dealers for
the latest details.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
Dual 20W Audio Amplfier
www.infobitav.com info@infobitav.com
SAFETY PRECAUTIONS
To ensure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
⚫Unpack the equipment carefully and save the original box and packing material for
possible future shipment.
⚫Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
⚫Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
⚫Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
⚫Refer all servicing to qualified service personnel.
⚫To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water.
⚫Do not put any heavy items on the extension cable in case of extrusion.
⚫Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
⚫Install the device in a place with fine ventilation to avoid damage caused by
overheat.
⚫Keep the module away from liquids.
⚫Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
⚫Do not twist or pull by force ends of the optical cable. It can cause malfunction.
⚫Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
⚫Unplug the power cord when left unused for a long period of time.
⚫Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
Dual 20W Audio Amplfier
Web:www.infobitav.com Email:info@infobitav.com
Table of Contents
1. Product Introduction ....................................................................................................1
1.1. Features............................................................................................................1
1.2. Package List......................................................................................................2
2. System Connection .....................................................................................................3
2.1. Audio Output......................................................................................................3
2.1.1. Default Output: 2x20Watt@4Ohm ..........................................................3
2.1.2. Bridge Connection: 1x40Watt@8Ohm....................................................3
2.1.3. Dual-mono Output...................................................................................3
2.2. Microphone Input...............................................................................................4
2.2.1. 48V Phantom Power Input......................................................................4
2.2.2. MIC Input.................................................................................................4
2.2.3. LINE Input...............................................................................................4
3. Panel Control...............................................................................................................5
3.1. Audio Switching.................................................................................................5
3.2. Volume/EQ controlling.......................................................................................5
4. IR Remote Control.......................................................................................................6
5. System Diagram..........................................................................................................7
6. RS232 Command........................................................................................................8
7. Specifications ............................................................................................................10
8. Troubleshooting & Maintenance................................................................................11
9. Customer Service......................................................................................................12
Dual 20W Audio Amplfier
1
1. Product Introduction
The Mini Digital Amplifier is a compact-size digital amplifier (Class-D) with 3 inputs (2
line in and 1 balanced MIC). It is integrated with powerful functions, including bridge
connection, dual-mono, EQ control, microphone mixer etc.
It has a good application in different places, including classroom, small meeting room,
lecture hall, bar, pub etc.
1.1.Features
⚫2x20Watt@4Ohm as the default amplifier output.
⚫Bridge connection function. User can switch the Mini Digital Amplifier to be
1x40Watt@8Ohm by bridge connection.
⚫Two stereo audio inputs, switchable by button, IR remote & RS232.
⚫Volume/Bass/Treble controllable by buttons IR remote & RS232.
⚫MIC port can support balance/unbalance signal, suppress the external noise
effectively.
⚫Line audio output at 3.5mm jack, with volume controllable.
⚫Dual-mono function. User can sum up the stereo audio to two times mono audio.
⚫MIC mixer function. The microphone will be mixed to the line audio output, and be
controlled separately.
⚫MIC input supports 48V phantom power, dynamic MIC and wireless MIC.
⚫Auto noise gate. It keeps detecting the audio and MIC input, will mute the output
when there is no input.
⚫Ultra low inrush current, no need for power sequencing. This allows multiple Mini
Digital Amplifier to be powered on simultaneously without overloading power
circuits.
⚫Convection cooler, fan is not needed.
⚫Antistatic case design: providing good protection for long-term and stable
performance.
Dual 20W Audio Amplfier
2
1.2.Package List
⚫1x Mini Digital Amplifier
⚫2x Pluggable Terminal Blocks
⚫1x RS232 Cable
⚫1 x Power Adapter
⚫1x Power Cord
⚫4x Plastic Cushions
⚫1x User Manual
Note:
⚫The IR remote and its battery are offered for charge separately.
⚫The IR receiver is also offered for charge.
⚫Please confirm if the product and the accessories are all included, if not, please
contact with the dealers.
Dual 20W Audio Amplfier
3
2. System Connection
2.1.Audio Output
2.1.1. Default Output: 2x20Watt@4Ohm
The default output of amplifier is 2x20Watt@4Ohm, so user can connect the amplifier
output in the regular way. As the picture below:
2.1.2. Bridge Connection: 1x40Watt@8Ohm
The Mini Digital Amplifier has the bridge connection, to double the output power at
1x40Watt@8Ohm. It will sum up the input left channel and input right channel to be
mono output, and the power is up to 40Watt.
The bridge connection is:
2.1.3. Dual-mono Output
The Mini Digital Amplifier also has the function of double-mono output. It can sum up
the left and right channel, to be the mono audio output. In this way, the both of the
outputs are showing the same mono audio.
The connection is:
Dual 20W Audio Amplfier
4
2.2.Microphone Input
The microphone input of Mini Digital Amplifier has three modes, and different modes
use different connections, as the picture below:
2.2.1. 48V Phantom Power Input
When the switch turns to “48V”, the MIC input will provide a 48V phantom power. This
is usually used for power supply for condenser microphone, Connection is:
“+” connects to positive, “-” connects to negative and “╧” to ground.
Note: In this mode, only condenser microphone can be connected with.
2.2.2. MIC Input
When the switch turns to “MIC”, the microphone input is used for connecting with
dynamic microphone. There are two different connections:
1) Unbalanced connection:
“╧” connects to ground, and “-” connects to signal.
“╧” connects to ground, and “+” connects to signal.
2) Balanced connection: “+” connects to positive, “-” connects to negative and “╧”
connects to ground.
2.2.3. LINE Input
When the switch turns to “LINE”, the microphone input is used for connecting with
normal audio or wireless microphone output. There are two different connections:
1) Unbalanced connection:
“╧” connects to ground, and “-” connects to signal.
“╧” connects to ground, and “+” connects to signal.
2) Balanced connection: “+” connects to positive, “-” connects to negative and “╧”
connects to ground.
Dual 20W Audio Amplfier
5
3. Panel Control
The buttons provide the control of volume/EQ control and switching. The following
content introduces audio switching and EQ control in detail.
3.1.Audio Switching
There are two switchable stereo audio inputs, one 2xRCA input, and one 3.5mm jack
input, switchable through the buttons as below:
3.2.Volume/EQ controlling
The line volume and MIC volume can be controlled by the buttons.
The MIC Volume/LINE volume/LINE bass/LINE treble will be selected by the buttons,
and controlled up/down/mute by the function buttons. Please check the picture below:
For example, to turn up the line volume, you should select the “LINE” first, and then
press the button “ ”.
Firstly,
select the
function
from this
menu.
Then, turn
down/up the
level, or
mute the
output.
Source
Selection
Dual 20W Audio Amplfier
6
4. IR Remote Control
Note: The IR remote, the IR receiver, and the battery of the IR remote are all offered
for charge.
Mute Mode:
MIC: Mute microphone
audio.
LINE: Mute line audio.
SPEAKER: Unmute.
Use to transmit the infrared
signal send by the IR
remote.
Volume Control:
MIC: Volume up or down
microphone audio.
LINE: Volume up or down
line volume.
BASS: Bass tuning.
TREBLE: Treble of line
audio.
Audio Inputs
1: RCA dual-mono audio
input.
2: 3.5mm jack.
IR receiver head,
works in conjunction
with the IR remote.
Please point the IR
remote at the IR
receiver when use, to
avoid getting out of
control as there is no
signal detected.
3.5mm jack, insert it
into the specialized
socket (3.5mm) to
connect the IR receiver
with the amplifier
Table des matières
Autres manuels infobit Amplificateur
