Infinity NV29 Manuel utilisateur
Owner’s Guide
NV29
Contents
Thank you for
purchasing the
Infinity Upright
Vacuum.
Important Safety Instructions 2
Getting Started 4
Using the Vacuum 6
Transporting the Vacuum 7
Cleaning with the Vacuum Accessories 8
Emptying the Dust Cup Assembly 10
Proper Care of Your Infinity Upright Vacuum 11
Troubleshooting 12
Checking for Blockages 13
Maintenance 14
Warranty and Registration 16
www.infinityvac.com 1
TOLL FREE: 1-888-668-9600
2TOLL FREE: 1-888-668-9600
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS For Household Use Only
General Electrical Safety:
Unplug from electrical outlet when not in use and before servicing.
DO NOT use vacuum with a damaged cord or plug.
DO NOT pull or carry vacuum by the cord.
DO NOT unplug by pulling on cord; to unplug, grasp the plug, not the cord.
DO NOT handle plug or vacuum cleaner with wet hands.
DO NOT run the vacuum over the power cord.
DO NOT use the cord as a handle.
DO NOT close a door on the cord.
DO NOT pull cord around sharp corners.
DO NOT leave appliance when plugged in.
Keep cord away from heated surfaces.
Turn off all controls before plugging or unplugging vacuum cleaner.
Hose Attachments:
DO NOT use if air flow is restricted; if the air paths, the hose, or the extension
tube become blocked, turn the vacuum cleaner off. Remove all obstructions
before you turn on the unit again.
Keep the end of the hose, wands and other openings away from face and body.
Keep rotating brush and suction openings away from hair, face, fingers,
uncovered feet or loose clothing.
Only use manufacturer’s recommended attachments.
General Use:
Use only as described in this manual.
DO NOT put any objects into openings.
Keep your work area well lit.
Keep the vacuum moving over the carpet surface at all times to avoid damaging
the carpet fibers.
DO NOT place vacuum on unstable surfaces such as chairs or tables.
DO NOT allow young children to operate the vacuum or use as a toy.
DO NOT use vacuum cleaner if it has been dropped, damaged, left outdoors, or
submerged in water. Return to EURO-PRO Operating LLC for examination, repair,
or adjustment.
When using an electrical appliance, basic
safety precautions should always be
observed, including the following:
READ ALL INSTRUCTIONS BEFORE
USING YOUR INFINITY UPRIGHT
VACUUM.
WARNING:
To reduce the risk of electric shock,
the two-pronged power cord plug
is polarized [one prong is larger
than the other]; it will fit into the
outlet only one way. DO NOT
force into outlet or try to modify
to fit.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY.
DO NOT USE OUTDOORS OR ON WET SURFACES:
3www.infinityvac.com
Cyclonic Chamber/Dust Cup/Filters:
Before turning on the vacuum:
• Make sure that dust cup, cyclonic chamber and all filters are in place after
routine maintenance.
• Make sure that all components and filters are thoroughly dry after routine
cleaning.
• Only use filters and accessories provided by EURO-PRO Operating LLC
[Failure to do so will void the warranty.]
General Cleaning:
DO NOT run the vacuum over large-sized objects.
DO NOT pick up hard or sharp objects such as glass, nails, screws or coins that
could damage the vacuum cleaner.
DO NOT pick up smoking or burning objects such as hot coals, cigarette butts, or
matches.
DO NOT pick up flammable or combustible materials such as lighter fluid,
gasoline, kerosene or use in areas where they may be present.
DO NOT pick up toxic solutions such as chlorine bleach, ammonia, or drain
cleaner.
DO NOT use in an enclosed space where vapors are present from paint, paint
thinner, moth-proofing substances, flammable dust or other explosive or toxic
materials.
DO NOT vacuum up any liquids.
DO NOT immerse vacuum cleaner in water or other liquids.
DO NOT use outdoors or on wet surfaces; use only on dry surfaces.
Use extra care when cleaning on stairs.
4TOLL FREE: 1-888-668-9600
2
1
a
c
b
d
e
g
*h *i
f
3
5
4
Along with your upright unit, you will
find the following components:
aDetachable Handle (Ergonomic Grip)
bTelescopic Wand
cCleaning Attachments
dUpper Hose Holder
eExtra Filters
fSuper Stretch Hose
gSpare Motor Belt
*
Note: depending on the model you
select, your Infinity comes with a Pet Hair
Power Brush (
h
)and Low Reach Bare Floor
Brush (
i
)that are kept in a separate
accessory bag.
Your Infinity Upright is a snap to
assemble:
1Lock into upright position.
2Attach the Upper Hose Holder: use a
Phillips Head screwdriver to remove
the screw attached to the vacuum
body.
3Place the Upper Hose Holder into the
slot; screw the holder onto the
vacuum body.
4Slide the Telescopic Wand into the
upright unit to click in place.
5Slide the Detachable Handle onto
the Telescopic Wand.
Getting Started
5www.infinityvac.com
778
6
6Attach each end of the Super Stretch
Hose to the vacuum and press into
Upper Hose Holder for easy storage.
IMPORTANT:
To prevent vacuum
from tipping, secure
hose in lower holder.
7Store Crevice Tool and Upholstery/
Dusting Brush on the unit.
8When storing your vacuum, wind
cord around the two cord holders
and secure with cord clip:
• Quick Cord release at the top of
the unit – place in the upright
position.
• Second holder [fixed] near the
base.
To release the cord, turn the Quick
Cord release to the left or right.
6TOLL FREE: 1-888-668-9600
33
Carpets
3
24
1
1
5
11
Bare Floors
22
Bare Floors
(and Tools)
Carpets
Using the Vacuum
1Set the Height Adjustment Dial.
When cleaning bare floors:
Set Height Adjustment Dial at
When cleaning carpets:
Adjust the Height Adjustment Dial
from to , depending on your
carpet style (low pile/scatter rugs,
plush carpets, deep pile carpets).
• Select lowest setting for maximum
cleaning.
• Select higher settings for easier
pushing on thicker carpets.
Your Infinity Upright Vacuum is a
versatile tool that can be used to clean
bare floor surfaces or carpets – with the
click of a button.
Lock vacuum into the upright position.
Plug in the vacuum.
2Set the Brush Roll Pedal for bare
floors/tools or carpets.
When cleaning bare floors:
Depress bare floors/tools side of
pedal [forward] to lock the brush roll.
When cleaning carpets:
Depress carpets side of pedal [back]
to engage the brush roll.
3Step on Handle Release Pedal to
release unit from locked position.
1
15
7www.infinityvac.com
4
1
2
Transporting the Vacuum
4Step on Power Button to turn unit on
and off.
Push to vacuum.
Note: If vacuum is difficult to push,
adjust the Height Adjustment Dial
until vacuum glides easily over the
carpet surface.
1To roll the vacuum:
Hold the Detachable Handle
(Ergonomic Grip) and tilt unit back
on wheels.
2To carry the vacuum:
Make sure unit is locked into the
upright position.
Lift by the Dust Cup Assembly
Handle (carry handle).
CAUTION:
DO NOT use the Detachable Handle
(Ergonomic Grip) to carry unit.
CAUTION:
When lifting or carrying, DO NOT
press Dust Cup Assembly release
button.
Lock vacuum into the upright position.
Unplug the vacuum.
Wind cord around the two cord holders.
Secure Super Stretch Hose in both
hose holders.
8TOLL FREE: 1-888-668-9600
a
Extends
17 feet
*
Cleaning with the Vacuum Accessories
Before cleaning with your accessories:
Lock vacuum into upright position.
Secure Super Stretch Hose in the lower
hose holder to prevent tipping.
Change the
Brush Roll Pedal
to the bare floors/
tools position.
DO NOT pull vacuum cleaner
around by the hose.
DO NOT overextend the hose
beyond its 17-foot reach.
Vacuum Accessories
Your vacuum comes a Detachable
Handle and Telescopic Wand. Use
one or the other to attach your
cleaning accessories.
Super Stretch Hose – extends
17 feet so that you can
reach the length of a
typical staircase.
Crevice Tool – this tool is used for
cleaning between cushions, under
radiators and baseboards, or hard-
to-reach crevices and corners.
Upholstery/Dusting Brush – this tool can be used with or without
the Dusting Brush attachment.
Attach or remove the Dusting Brush with one snap. With the Dusting
Brush in place, you can dust a variety of surfaces from furniture and
window blinds to lamp shades and book shelves; without the Dusting
Brush attachment, use the tool to remove dust and/or pet hairs from
upholstery surfaces and carpeted stairs.
Using the Detachable Handle:
Lock vacuum into upright position.
Press the Detachable Handle release
button (a) to release handle.
The Detachable Handle and Super
Stretch Hose are now separate from the
Telescopic Wand.
Push the selected cleaning tool into the
handle.
9www.infinityvac.com
b
c
*
*
Using the Telescopic Wand:
Lock vacuum into upright position.
Press the Telescopic Wand release
button (b).
Hold Telescopic Wand and pull out of
unit.
Push the selected cleaning tool onto the
end of the wand.
Press the Telescopic Height Adjustment
Button (c) to adjust wand to desired
length.
*
Note: depending on the model you select, your Infinity comes with a Pet Hair Power
Brush and Low Reach Bare Floor Brush that are kept in a separate
accessory
bag.
Pet Hair Power Brush – this unique tool has dual felt strips
along the cleaning surface that are designed for heavy-duty pet
hair removal.
Low Reach Bare Floor Brush – only use this tool with the
Telescopic Wand. The Bare Floor Brush is used when you need
to clean floor surfaces such as hardwood, hardwood laminates,
and tile. The soft natural bristles provide an easy-glide action
to protect all bare floor surfaces.
Note: you should only use the Low Reach Bare Floor Brush with the Telescopic Wand.
To order additional parts and accessories, go to www.infinityvac.com or call
1-888-668-9600.
Note: some parts may be available at your local Infinity retailer.
Autres manuels pour NV29
1
Table des matières
Autres manuels Infinity Aspirateur
Infinity
Infinity NV31 Manuel utilisateur
Infinity
Infinity NV31W Manuel utilisateur
Infinity
Infinity NV30CN Manuel utilisateur
Infinity
Infinity NV30CN Manuel utilisateur
Infinity
Infinity V12 Manuel utilisateur
Infinity
Infinity NV29 Manuel utilisateur
Infinity
Infinity NV22 Manuel utilisateur
Infinity
Infinity NV22Q Manuel utilisateur
Infinity
Infinity Infinity BG1 Silence Manuel utilisateur
