Infinite PolyPhaser IS-50 Series Manuel utilisateur

1200-623 Rev A

+1.208.635.6400 | www.polyphaser.com

RF Surge Device Installation Guide

This document provides installation, mounting and grounding best practice information for IS-50, IS-B50, IS-NEMP, US-

NEMP, and HT-RI-E3PM-BNFM RF Devices.

Image #1 provides installation best practice for IS-B50, which has flexible bulkhead & bracket mounting options.

Note: Mating Connector Torque Rating typically is 15-20in-lbs, and Mounting Nut Torque Rating is 55-65in-lbs

(This information based upon other RF Devices with similar “N” Connector torque ratings)

Note: The majority of IS-B50 models include a Hardware Kit to facilitate installation.

Image #1

Image #2 shows Part number “BF-Adapter” which is a typical bulk-head to flange adapter for the IB-B50 ONLY.

The Hardware Kit Contents can be seen within the Package to the right of the BF-Adapter.

Image #2 Hardware Kit Dimensions

1200-623 Rev A

+1.208.635.6400 | www.polyphaser.com

IS-50 SERIES

The IS-50 Series is labeled indicating the frequency and power handling ability. The location of the “ANTENNA” and

“EQUIPMENT” ports are also marked. A backward installation will not protect your equipment. There is no dc continuity

from center pin to center pin on this unit. The operating bandwidth and power handling capabilities are labeled for each

unit. Be sure the unit meets your application. A conductive joint compound is recommended at the flange/ground junction

to minimize weather related complications and improve conductivity. Copper Cleaning Kits (CCK) with conductive joint

compound are available from PolyPhaser.

For Outside Installation: This unit is NOT weatherproof and must be sealed against moisture.

Customer must apply PolyPhaser’s Weather Proofing Kit (Part Number: WK-1) to seal the unit and cable connections.

Image #3 shows a typical surface mounting option for the IS-B50.

For grounding, these can be typically seen mounted to a Trapeze Grounding Bar, which is shown in image #4.

PolyPhaser does NOT sell the Trapeze Grounding Bar shown below, but can be purchased through Harger (Part

Number GBI14116H).

Image #3 Image #4

1200-623 Rev A

+1.208.635.6400 | www.polyphaser.com

Image #3 shows the Copper Cleaning Kit (Part Number “CCK”) which is typically used to clean copper before

installation of grounding equipment) along with a list of all of the components that come with it.

Image #3

WARNING - Do not connect when a storm is near! Do not connect when transmissions are occurring! Do not stay in an area that has operating

equipment in an electrical storm! The impulse suppressor may save the equipment from danger, but it cannot keep you or anyone else safe in the area!

These commodities or technology are exported from the U.S. in accordance with the Export Administration Regulations. Diversion contrary to U.S. law

prohibited.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Infinite Parafoudre

Infinite

Infinite TRANSTECTOR ALPU-TSU Manuel utilisateur

Infinite

Infinite Transtector DRDC Series Manuel utilisateur

Infinite

Infinite L-com SRCN-C037 Manuel utilisateur

Infinite

Infinite Transtector ACP 100DR2 Series Manuel utilisateur

Infinite

Infinite L-com SRCN-C033 Manuel utilisateur

Infinite

Infinite Transtector 1101-1110 Manuel utilisateur

Infinite

Infinite L-com SRCN-C03A Manuel utilisateur

Infinite

Infinite Transtector CP 2341 Manuel utilisateur

Infinite

Infinite L-com SRCN-C711-2 Manuel utilisateur

Infinite

Infinite Transtector ALPU Manuel utilisateur

Infinite

Infinite TRANSTECTOR ACP 100MN Manuel utilisateur

Infinite

Infinite TRANSTECTOR ALPU Series Manuel utilisateur

Infinite

Infinite Transtector ALPU PTP INJ Manuel utilisateur

Infinite

Infinite L-com SRCN-C266 Manuel utilisateur

Manuels Parafoudre populaires d'autres marques

ELAC

ELAC ProteK PR91-W Manuel utilisateur

Tsubaki

Tsubaki TSM4000M1 Manuel utilisateur

QVS

QVS PP134C Manuel utilisateur

CyberPower

CyberPower CSP604T Manuel utilisateur

Davis Instruments

Davis Instruments Radio Surge Protector Manuel utilisateur

M-system

M-system MGA-100 Manuel utilisateur

CyberPower

CyberPower CSP706T Manuel utilisateur

CyberPower

CyberPower B300WRC1 Manuel utilisateur

M-system

M-system MGD-24 Manuel utilisateur

Leviton

Leviton 51120-3R Manuel utilisateur

Panamax

Panamax MAX 5400-EX Manuel utilisateur

CyberPower

CyberPower B1006T Manuel utilisateur

OBO Bettermann

OBO Bettermann ÜSM-20-230I1PE65 Manuel utilisateur

Minuteman

Minuteman MMS7120RCT Manuel utilisateur

Leviton

Leviton 52412-DS3 Manuel utilisateur

Savio

Savio LZ-07 Manuel utilisateur

Siemens

Siemens HNM3M120 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric LITOL LTM-125RF Manuel utilisateur