6 Acuity Brands® | Indy™Light Commission Tool Operations Instructions
Document #065-1140
Setting & Activating Presets
• Use the SCAN SELECT button to discover luminaires
in the network and SELECT a luminaire.
• Power the unit ON.
• To activate the PRESET EDIT MODE, press and hold
the MODE button for three (3) seconds.
• The screen will display PRESET EDIT MODE in black
letters against a blue background.
• Release the MODE button. The display shows the
numbers 1 to 5 at the top of the display. The active
SCENE PRESET is highlighted and the CCT/DIM
settings of the active SCENE PRESET are shown.
To set SCENE PRESETS
• Use the DIMMING and CCT UP/DOWN buttons to set
the desired CCT and DIM values.
• Press the MODE button and the Sat & Hue levels will
appear in the display.
• Use the UP/DOWN buttons to set the desired SAT & HUE
values.
• Use SCAN SELECT to choose the next SCENE PRESET
number and set DIM, CCT, SAT and HUE levels.
• Repeat to store additional SCENE PRESETS
Note: SCENE PRESET settings are not saved until you exit and save them.
SCAN SELECT
Button
MODE Button
DIMMING UP
Button
CCT UP/DOWN
Button
MODE Button SCAN SELECT
Button
To save and activate SCENE PRESETS:
• Press and hold the MODE button for 3 seconds.
• The display will read “Save Changes? Yes (COPY) or
No (PASTE)”.
• If No (PASTE) is pressed, PRESET SCENE changes are
not saved.
• If Yes (COPY) is pressed, the PRESET SCENES are saved
• The display will read “Activate Presets?”, “Yes (COPY)”
or “No (PASTE)”.
• Press Yes (COPY) button to activate Scene Presets.
The display will read “Executing”.
• If No (PASTE) is pressed, SCENE PRESETS are stored
but not activated and the lamp reverts to CCT/DIM and
SAT & HUE mode.
MODE
Button
PASTE Button
COPY Button
