Indumicro IMP-A151[G]T Manuel utilisateur

Industrial Panel PCs

IMP-A1x1 Series

User Manual

Warning!

___________________________________

This equipment generates, uses and can radiate radio frequency energy and if not installed and

used in accordance with the instructions manual may cause interference to radio communications.

It has been tested and found to comply with the limits for a Class A computing device pursuant to

FCC Rules, which are designed to provide reasonable protection against such interference when

operated in a commercial environment. Operation of this equipment in a residential area is likely

to cause interference in which case the user at his own expense will be required to take whatever

measures may be required to correct the interference.

Disclaimer

This information in this document is subject to change without notice. In no event shall

Indumicro.com be liable for damages of any kind, whether incidental or consequential,

arising from either the use or misuse of information in this document or in any related

materials.

Electric Shock Hazard – Do not operate the machine with its back cover removed. There are

dangerous high voltages inside.

___________________________________

Table of Contents

Chapter 1: System description

1.1 Specifications .............................................................................................................................. 1

1.2 Features of the IMP-A1x1 series ................................................................................................. 2

Chapter 2: Configuring the system

2.1 Installing a PCI add-on card ........................................................................................................ 3

2.2 Wiring diagrams serial ports ........................................................................................................ 4

Chapter 3: Touch screen configuration

3.1 Configuring a resistive touch screen ........................................................................................... 5

Chapter 4: Dimension drawings

4.1 Dimension drawing IMP-A151[G]T ............................................................................................ 17

4.2 Dimension drawing IMP-A171[G]T ............................................................................................ 18

4.3 Dimension drawing IMP-A191T ................................................................................................ 19

1.1 Specifications

Model IMP-A151[G]T IMP-A171[G]T IMP-A191T

System

CPU Intel®Atom™ Cedar View D2550 1.8GHz Dual Core Processor

System chipset Intel NM 10 Express

System memory 2 x 204-pin DDR3 SO-DIMM 800/1066MHz, up to 4GB

I/O Ports

USB 4 x USB 2.0 type A

Serial / Parallel 1 x RS-232, 1 x RS-232/422/485 and 1 x RS-422/485 (default)

Audio 1 x MIC-in, 1 x Line-out

External display 1 x VGA

LAN 2 x GbE

Other 1 x 2 pin remote power switch

Storage Space

HDD 1 x 320 GB SATA HDD

Card reader 1 x Externally accessible CompactFlash slot

Supported OS Windows XP Pro, Windows Standard Embedded 7 (32bit)

Expansion

Expansion slots 1 x PCI slot

Display

Display type 15” TFT-LCD 17” TFT-LCD 19” TFT-LCD

Max. resolution 1024x768 1280x1024 1280x1024

Max. color 262K 16.7M 16.7M

Luminance (cd/m2) 40 350 350 2

View angle 160° / 160° 170° / 170° 170° / 160°

Backlight lifetime 50,000 hrs

Touch Screen

Type Analog resistive on ‘T’ models, GFG on ‘GT’ models

Light transmission 80% for ‘T’ models / 90% for ‘GT’ models

Power

Input voltage DC 9~32V

Power consumption 33.2W 47.6W 48.1W

Mechanical

Construction Steel front and cover

IP rating IP65 front panel

Mounting Panel mount / VESA 75

Dimensions (w x h x d) 410 x 310 x 94.8mm 439 x 348 x 94.3mm 484 x 400 x 94.3mm

Environmental

Operating temperature 0~50°C

Storage temperature -20~60°C

Storage humidity 10 to 90% @ 40°C, non- condensing

Certification CE / FCC Class A

IMP-A1x1 User Manual 1

1.2 Fea tures of the IMP-A1x1 series

The IMP-A151/A171/A191 are fanless / compact panel-mount industrial PCs, which come with a 15"

(luminance of 400 cd/m²), 17" (luminance of 350 cd/m²) or 19" (luminance of 350 cd/m²) TFT LCD.

They are powered by an Intel®Atom D2550 1.8GHz processor.

These industrial panel PCs also feature a PCI expansion slot, three COM ports, four USB 2.0 ports,

one 2.5” HDD drive, a wide range DC 11~32V power input, etc.

The 'T' models are equiped with an analog resistive touch screen while the 'GT' models come with a

GFG (Glass-Film-Glass) touch screen.

GFG touch screens are not only resistant to scratch and abrasion but also to most of the chemicals.

Apart from that, glass is transparent and does not impair the brilliance of the picture at all.

Front and rear view of the IMP-A171

Chapter 1: System description

IMP-A1x1 User Manual 2

There are 2 screws to open the cover giving

you access to the PCI expansion slot.

Shown in the picture is the PCI expansion

slot as circled. It can be inserted with any

half-size PCI add-on card.

(In this case the entire back cover of the

Panel PC is removed to give you a clear

picture of the position the PCI slot)

Slide the PCI add-on card into the slot.

Carefully push the add-on card into the rail

of the slot.

After placing the add-on card tighten the

screw as circled.

Close the chassis in the same way as it was

opened.

Chapter 2: Configuring the system

2.1 Installing a PCI add-on card

IMP-A1x1 User Manual

Chapter 2: Configuring the system

2.2

Wiring diagrams serial ports

COM1/COM2

RS-232

Pin# Signal Name

1 DCD (Data Carrier Detect)

2 RXD (Received Data)

3 TXD (Transmit Data)

4 DTR (Data Terminal Ready)

5 Ground

6 DSR (Data Set Ready)

7 RTS (Request To Send)

8 CTS (Clear To Send)

9 RI (Ring Indicator)

RS-422/485

Pin# Signal Name

1 422_RX+

2 422_RX-

3 422_TX- / 485-

4 422_TX+ / 485+

5 Ground

6 NC

7 NC

8 NC

9 NC

COM3

IMP-A1x1 User Manual

PenMount Control Panel

The functions of the PenMount Control Panel are Device, Multiple Monitors ,Tools and About,

which are explained in the following sections.

Device

In this window, you can find out that how many devices are detected on your system.

Calibrate

This function offers two ways to calibrate your touch screen. ‘Standard Calibration’ adjusts most

touch screens. ‘Advanced Calibration’ adjusts aging touch screens.

Standard Calibration Click this button and arrows appear pointing to red squares. Use your

finger or stylus to touch the red squares in sequence. After the fifth red

point calibration is complete. To skip, press ‘ESC’.

Advanced Calibration Advanced Calibration uses 4, 9, 16 or 25 points to effectively calibrate

touch panel linearity of aged touch screens. Click this button and touch

the red squares in sequence with a stylus. To skip, press ‘ESC’.

3.1 Configuring the touch screen

Chapter 3: Touch Screen configuration

IMP-A1x1 User Manual

To calibrate your touch screen:

1. Please select a device then click “Configure”. You can also double click the device too.

2. Click “Standard Calibration” to start calibration procedure.

Chapter 3: Touch Screen configuration

IMP-A1x1 User Manual

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Indumicro Écran tactile

Indumicro

Indumicro IMP-A150 Manuel utilisateur

Indumicro

Indumicro IMP-A157 Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur