inbody 270 Manuel utilisateur
270 QC Report Extract/Print Instructions
1. Please press the Administrator Menu on the Main Screen.
2. Please enter your password and press enter
3. Next, please insert your InBody USB thumbdrive into any open USB port located on the back of
the InBody machine.
4. Once the USB thumb drive has been inserted and press the top right corner consecutively until you hear a
chime. (NOTE: Please unplug the printer from the InBody before pressing the top right corner) .This indicates
that the data is being copied. Shortly after, you will hear another chime indicating that the transfer has been
complete.
4.1. If you want to print the QC report, please leave the printer cable plugged in. It will chime and will
proceed to printing out the QC report. (Please make sure to add at least 30 sheets of blank paper. You can skip
Step 5 if you are printing the QC report.
5. Once the transfer has been completed, please insert the USB into your computer and check
that the file has been downloaded. The file name should be “qcevent”. Please email the file to
your InBody Support representative for review.
Autres manuels pour 270
3
Autres manuels inbody Échelle
inbody
inbody DIAL H30 Manuel utilisateur
inbody
inbody 270 Manuel utilisateur
inbody
inbody H20B Manuel utilisateur
inbody
inbody Dial Manuel utilisateur
inbody
inbody 570 Manuel utilisateur
inbody
inbody Dial Manuel utilisateur
inbody
inbody R20 Manuel utilisateur
inbody
inbody H20B Manuel utilisateur
inbody
inbody H20N Manuel utilisateur
