IN2UIT BoomPack Manuel utilisateur

BoomPack

IN2UIT

Sound to go：iPad AlO BLUETOOTH SPEAKER CASE

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions carefully.

2. Heed all warnings.

3. Use in accordance with the manufacturer's instructions.

4. Only use attachments/accessories specified by the manufacturer.

5. Clean only with a dry cloth.

6. Do not use or place this apparatus near water.

7. Do not use near any heat sources such as radiators, stoves, or other

apparatus (including amplifiers) that radiate heat.

8. Protect the power cord from being trampled on, pinched or twisted at the

plug & tail ends.

9. Unplug this apparatus during lightning storms or when unused for long

periods of time.

10. Refer all servicing to qualified service personnel.

11. Servicing is required when the device has been damaged in any way.

WARNING

To reduce the risk of fire or electrical shock, do not expose this

equipment to dripping or splashing and ensure that no objects with

liquids, such as vases, are placed near the device.

Be advised that different operating voltages and power sockets require

matching adaptors and plugs for your particular region.

Always observe the local safety regulations.

If using the device connected to an AC power supply,, disconnect the

power supply cord from the AC outlet to completely turn off power

and/or battery charging.

Do not place the device in a confined space with limited ventilation or

blockage.

Do not open, disassemble or tamper with the device as there is a

serious risk of electric shock.

Service

There are no user-serviceable parts.

All service must be performed by qualified personnel

CAUTION

Users are advised that any tampering or modifications to the device

that have not expressly stated in this manual could void your warranty

FEDERAL COMMUNICATIONS COMMISSION

(FCC) STATEMENT

This equipment has been tested and found to comply with the limits for a

Class B digital device, Pursuant to Part 15 the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful Interference, and (2) This device must

accept any interference received, including interference that may cause

undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority to operate

this equipment.

Contents

INTRODUCTION............................................................................... 1

PACKAGE CONTENTS .................................................................. 1

Getting Started................................................................................. 2

Opening ELECTROSTATZ™ tweeters............................... 2

Using the cover as a stand................................................... 3

OVERVIEW........................................................................................ 5

Front view of the speaker..................................................... 5

Rear panel of the speaker..................................................... 5

OPERATING...................................................................................... 6

Connecting to AC power....................................................... 6

Inserting the iPad.................................................................... 6

Control button.......................................................................... 7

Audio Playback via Bluetooth wireless connection...... 7

Charging the battery .............................................................. 9

Removing iPad......................................................................... 9

System status indicator table.............................................. 9

Optimization of audio performance ................................. 10

TROUBLESHOOTING................................................................... 11

CARE AND MAINTENANCE........................................................ 12

CONTACTING CUSTOMER SERVICE...................................... 13

WARRANTY.................................................................................... 13

TECHNICAL SPECIFICATIONS.................................................. 14

APPENDIX ....................................................................................... 14

Getting Started....................................................................... 15

Overview..................................................................................16

Front view of the keyboard......................................... 16

Rear view of the keyboard..........................................16

LED Indication........................................................................ 17

Hot Key Functions ................................................................ 17

Pairing the keyboard............................................................18

Troubleshooting and Tips...................................................21

INTRODUCTION

Dear Audiophile,

Thank you for purchasing ‘BoomPack’by IN2UIT. BoomPack features

hi-end electrostatic tweeters using the proprietary SBESL (Self-Biased

ElectroStatic Loudspeaker) acoustic technology that we refer to as

ELECTROSTATZ™Technology. The acoustic performance and

reproduction are of the highest quality and level, revitalizing your many

familiar sounding recordings into a new listening experience.

This advanced proprietary technology results from years of intense research

and development. IN2UIT are one of the very few companies who have

commercialized and realized this technology for the masses Each

ELECTROSTATZ™tweeter is constructed in state-of-the-art facilities using

proprietary manufacturing techniques and equipment, cohering to rigorous

standards and manufacturing processes. To reproduce the ultimate sound

quality output from our devices, certain user requirements have been

addressed in this owner’s manual. By conforming to our tips and suggestions,

you will achieve the maximum performance from the device. We wish you

many years of enjoyment through BoomPack, our ultra-high performance

Bluetooth mobile speaker.

PACKAGE CONTENTS

1 x BoomPack - Bluetooth mobile speaker device.

1 x BoomPack - Bluetooth keyboard (optional)

1 x 5V / 1A DC power adaptor (separated plug) (micro USB charger)

Getting Started

Opening ELECTROSTATZ™tweeters

The ELECTROSTATZ™tweeters are positioned in the rear of the

BoomPack case and held in position by hinges for convenient opening and

closing.To avoid damage, do not open/close or pull on the

ELECTROSTATZ™tweeters with too much force and do not over extend

the tweeters past the engaged, listening position. Do not use the extended

tweeters as handles when carrying or moving the BoomPack.

1. In the closed position, the ELECTROSTATZ™tweeters engage to the

rear of the case with magnets that hold the panels shut for convenient

mobiity and storage

2. For the best acoustic performance, the Electrostatz tweeters should

always be fully opened and facing the user when listening to

BoomPack’s audio playback.

3. To open the tweeters, gently rotate both panels outwards from the

closed position to the engaged, listening position. The panels should be

rotated until flush with the back surface of the rear case when fully

engaged. Do not over extend the tweeters past the flush, engaged

position as this will damage or break the Electrostatz tweeter panels

4. When fully opened and engaged the ELECTROSTATZ™tweeters will

physically lock into position and the user will feel and hear the panels

‘click’into position.

5. To close the panels, follow the above instructions in reverse order.

NOTICE: To avoid electric shock, do not use sharp objects such as pens

or needles to prod or pucture the ELECTROSTATZ™tweeters.

Using the cover as a stand

The display cover instantly attaches to the BoomPack with the magnetic

tabs .

1. In the closed position, the cover attaches to the front side of the

BoomPack. Pull on the magnetic tab to open the cover.

2. When the cover is folded up to act as a BoomPack stand, magnets

inside the Smart Cover automatically attach to the rear, protruding area

on the case. In the folded position the cover acts as a strurdy base.

3. Lean the BoomPack against the folded up cover for a sturdy base and

stand.

OVERVIEW

Front view of the speaker (opened position)

1. Receptacle fits both the iPad 2 and the New iPad

2. 2x SBESL ELECTROSTATZ™tweeters (LHS / RHS stereo sound)

3. 1x Power / Bluetooth LED indicator (IN2UIT LOGO) (inset picture)

4. 1x mic (under mesh , near IN2UIT LOGO)

1x foldable cover stand

Rear view of the speaker (closed position)

1. 2x SBESL ELECTROSTATZ™tweeter(LHS / RHS stereo sound)

2. Power / Bluetooth pairing button (inset picture)

3. 1x micro USB connector (inset picture)

OPERATING

NOTICE:

For safety purposes always turn off the main power switch when plugging or

unplugging in the device from the AC power socket

Operating temperature is from -20 degrees to 40 degrees Celsius.

To avoid damage, don’t put the speaker in high temperature environment .

Connecting to AC power

The universal power adaptor that comes with BoomPack accepts multiple

voltages (100-240V); however users are advised to check regional AC

voltage supply and plug type before connecting to the power supply. Prior to

connecting to the power supply, make sure the speakers are switched off

first. Engage the mirco USB on the side of the device. Turn on the speakers’

power as indicated below.

Inserting the iPad

Firstly, make certain the iPad is correctly orientated. Make sure all buttons,

connectors and camera of the iPad are aligned before inserting your iPad

into the Boompack receptacle. Place your iPad into the receptacle by

inserting the bottom edge of your iPad first and making certain it is securely

positioned and engaged with the corner underhooks. Rubber pads in the

receptacle should facilitate correct iPad fit for both iPad 2 and the new iPad..

Once the iPad’s lower edge is in position and secure, push the top edge of

the iPad firmly into the receptacle and ‘click’into its fully engaged position.

Make sure the iPad is securely fixed before moving or using the BoomPack..

NOTICES:

The BoomPack is designed for iPad2 and the new iPad.

If the battery of your iPad is extremely low, charge it before operation.

Autres manuels pour BoomPack

Table des matières

Autres manuels IN2UIT Intervenants

IN2UIT

IN2UIT Collage Manuel utilisateur

IN2UIT

IN2UIT Collage Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur