E150401X_ENG 27/07/15
step can works with a different temperature than the others.
During the program composed with multiple step it’s possible to activate the
“skip” function if the parameter “FEED CONTROL” is enabled (this parameter
is present only in the technical menu).
.
oSTEP1-STEP2...STEPx: (It appears only if "TIME" is selected as
“PROGRAM TYPE“). The parameter allows to select the time and the
temperature on each single step. The total duration of the program is the
sum of each step’s time. It’s possible to create 10 steps maximumfor each
single program.
oRESIDUAL HUMIDITY: (It appears only if “RESIDUAL HUMIDITY” is
selected as “PROGRAM TYPE”). The parameter allows to select one of the 3
humidity levels already configured in the menu “MENU HUMIDITY”. The 3
levels of humidity available are:
IRON DRY;
DRY (normal dry);
EXTRA DRY.
oCOOLING TIME: At the end of the drying process, this parameter allows to keep the
fan blower and the drum rotation activated without heating. During this period, if the
temperature achieves the value set in the parameter “COOLING TEMPERATURE”,
the machine will stop automatically. If not reached, the cooling cycle will last for the
whole time defined in this parameter.
Default = 3’.
oCOOLING TEMPERATURE: Insert the temperature to achieve
Enter the temperature to be reached during the cooling phase. If the temperature is
reached within the time set in the “COOLING TIME”, the machine will automatically
shut down at the end of the allotted time for this parameter.
Default = 40°C.
oREVERSING DRUM: On machines equipped with the reversing drum (2 motors), it
allows to execute programs without inversion. The drum will rotate in one direction
only. The selectable values are WITH or WITHOUT.
Default = WITH
oDRUM MOVEMENT TIME FORWARD: It defines the time for the clockwise rotation
of the drum.
Default = 40”.
oDRUM MOVEMENT TIME PAUSE: It defines the pause time between the clockwise
and counterclockwise rotation.
Default = 5”.
Do not set values lower than the default to prevent the sudden reversal of the drum
inflicts on the belts or gearbox wearing.
Do not set values higher than the default to avoid the burning of the linen and to
ensure an uniform drying process.
oDRUM MOVEMENT TIME BACKWARD: It defines the time for the
counterclockwise rotation of the drum.
Default = 40”.
oDRUM SPEED: (It appears only if “DRUM INVERTER”is set to “YES” in the
technical menu). It allows to select the rotation speed of the drum for a certain
program. The rotation speed will still be editable, even if in a non-definitive way,
during the working process of the machine.
