Imenco SeaLED 300 Manuel utilisateur

SeaLED

IMENCO AS Visiting Address: Stoltenberggata 1, 5527 Haugesund, Norway Office: +47 52 86 41 00

imenco@imenco.com

Org No: 923 005 749 MVA Mail Address: PO. Box 2143, 5504 Haugesund, Norway Fax: +47 52 86 41 01

www.imenco.com

SeaLED 300 Subsea Light

USER MANUAL

Rev. 3

SeaLED 300 - User Manual

Revision History

Rev.No

Description

Date of Rev

Issued for review 1

01/12/15

Issued for review 2

15/12/15

Issued for use

18/12/15

Extended product range included

15/06/16

Software description added

04/07/16

Contents

Contact ..........................................................................................................................................3

Safety information .......................................................................................................................3

Warranty .......................................................................................................................................3

1 General Description .............................................................................................................4

1.1 Regarding these Instructions for Use .........................................................................4

1.2 The SeaLED 300 / SeaLED 300L Subsea LED Light ....................................................4

1.3 Main Features................................................................................................................4

2 Technical Specification.........................................................................................................5

2.1 Connector Configuration .............................................................................................5

2.2 Serial commands ..........................................................................................................6

2.3 Analogue input (0 – 10V) ..............................................................................................6

3 Mechanical Installation........................................................................................................6

4 Electrical installation ............................................................................................................7

5 Operational procedures ......................................................................................................7

5.1 Hazards and protective measures..............................................................................7

5.2 Temperature protection: .............................................................................................7

5.3 Power on:.......................................................................................................................7

6 Maintenance .........................................................................................................................7

6.1 General maintenance ...................................................................................................7

6.2 Service and Repair ........................................................................................................8

7 Packing & Shipping...............................................................................................................8

SeaLED 300 - User Manual

Contact

for assistance / clarification on any of the contents of this manual, please contact:

Imenco AS

Subsea Electronics

Kophaug 3

5570 Aksdal NORWAY

Tel: +47 52 86 41 00

E-mail: [email protected]

www.imenco.com

Safety information

IMPORTANT! The Imenco SeaLED 300 Subsea Light is a technically advanced product.

Please make sure to read and understand all sections of this manual before installing or

operating this product. Installation of this product should only be performed by

qualified personnel.

WARNING! This product contains no user serviceable parts. Do not open, alter or

disassemble this product. Failure to comply with this warning can result in damage to

equipment and void of warranty.

WARNING! The housing is NOT connected to any Protective Earth circuits.

The metal housing has no electrical contact with any of the circuits inside the SeaLED

300. This is to isolate the Lights housing from other equipment that includes dangerous

high voltage and to minimize corrosion that otherwise might be intensified by electrical

contact to other nearby metal equipment or structures exposed to the sea water.

Warranty

Be sure to read and comply with Imenco’s Terms & Conditions that the SeaLED 300

was sold under.

SeaLED 300 - User Manual

1General Description

1.1 Regarding these Instructions for Use

The intended use of these instructions is to provide and guide the operator / user of the

equipment with instructions on the technical specifics of the product, how it functions,

the safety aspects of its use, how to prepare, operate and maintain the product.

All information in this document is provided commercial in confidence and shall not be

published or disclosed, wholly or in part to any other party without Imenco’s written

permission.

1.2 The SeaLED 300 / SeaLED 300L Subsea LED Light

The SeaLED 300 is a high output LED light primarily designed as a ROV main / flood light.

The SeaLED 300 incorporates twelve high efficient LED modules producing a proximally

12.000 Lumen, equivalent of a 600 watt halogen light.

The SeaLED 300 can be dimmed by Triac-dimmer on power source, by RS-232, RS-485

serial commands, or 0-10v analogue input on request.

1.3 Main Features

•Compact High output unit

•Block or Bar layout

•Temperature protected

•110VAC/DC power

•Various control methods

•Standard and Wide Angle versions

•3.200 Kelvin or 5.000 Kelvin colour temperature

SeaLED 300 - User Manual

2Technical Specification

Light output 12.000 Lumen

Light color temperature 3.200 K or 5.000 K

View port material Acrylic

Light fan angle 40° or 75°

Light control Triac, RS232 / RS485, 0 – 10V

Connector Customer specified

Housing material Anodized Aluminium

Maximum depth 6.000 msw

Mass in air 2.5 Kg

Mass in seawater 1.3 Kg

Length, ex connector 196 mm / 500 mm

Width 108 mm / 80 mm

Height 60 mm / 60 mm

Power input 110VAC/DC - max 176 W

Operating temperature range 0°C to +40°C

2.1 Connector Configuration

The SeaLED 300 can be delivered with a wide range connectors and pin configurations.

The configuration for this specific item is in the Quality Control document on the last

page.

WARNING! Turn the power off before connecting or disconnecting the connector.

SeaLED 300 - User Manual

2.2 Serial commands

The SeaLED 300 is supplied with a simple light GUI for setup and control:

Fig. 1 – Light control GUI

The GUI sends commands to the light unit, there is no feedback from the unit to the GUI.

FUNC 23 = Light up

FUNC 24 = Light down

FUNC 90 = Activate analogue input

FUNC 91 = Deactivate analogue input

Serial Protocol = 9600 N 8 1 (end char = Carriage Return)

2.3 Analogue input (0 – 10V)

When analogue input is activated, the light will be off if no input voltage is applied.

3Mechanical Installation

Installation of this product should only be performed by qualified personnel.

Do not open the Light when carrying out the installation.

Mount the Light on a secure and vibration free surface and strap the cable for stress

relief to the supporting structure.

The Light should be electrically isolated from the mounting base in order to minimize

any corrosion current between the relatively housing and surrounding metal structures.

SeaLED 300 - User Manual

4Electrical installation

IMPORTANT!

•Installation of this product should only be performed by qualified personnel.

•Verify that the connector pin assignments match with the system where the

Light is being installed. Mind the connector pin numbers and wire colours as

necessary.

•Do not connect /disconnect the subsea connector when the power is ON.

5Operational procedures

5.1 Hazards and protective measures

The SeaLED 300 does not generate or use dangerous high electrical voltages. Follow the

safety information at the beginning of this manual.

5.2 Temperature protection:

The SeaLED 300 has a built in temperature sensor which will regulate the current to the

LEDs so the unit doers not overheat. Still, do not use for long periods of time on the

surface or in direct sun. The light output will start dimming at 45°C internal temperature.

5.3 Power on:

When applying power, there is a 4 second delay before the unit outputs light.

6Maintenance

6.1 General maintenance

After use in seawater or other corrosive environments, rinse the unit and cables in fresh

water.

Inspect the front port for dirt and dust and remove any surface dirt using compressed

air. Clean the front port glass using a mild detergent and a soft cloth. Do not use alcohol

or solvent based cleaning solutions because that could damage the pressure seals and

glass coating. Avoid circular wiping patterns.

Reapply silicon based lubricant to the connector regularly as needed.

SeaLED 300 - User Manual

6.2 Service and Repair

This product contains no user serviceable parts. Service and modifications are to be

carried out by Imenco personnel or by qualified third party after appointment. Failure to

comply may result in personal injury, damage to equipment and loss of warranty.

If the SeaLED 300 seems to be not working properly, please try to speed up the service

that Imenco can provide by describing the problem in specific terms from the person

who have first handed observed the fault. Remember if necessary to describe the

system where the SeaLED 300 is installed since the root cause sometimes can originate

outside a failing part in an advanced system.

7Packing & Shipping

The packing & shipping of the goods shall generally be according to Imenco’s approved

procedures.

Warning: The SeaLED 300 includes fragile parts which must not be subject to vibrations and

shock during transport.

The subsea connector should be protected with a dust cap whenever it is not connected

to a cable.

- - - -

Table des matières

Autres manuels imenco Mettre en lumière

imenco

imenco Spinner Shark Manuel utilisateur

Manuels Mettre en lumière populaires d'autres marques

Guangzhou Yinhe Lighting&Sound Equipment Factory

Guangzhou Yinhe Lighting&Sound Equipment Factory NE-204 Manuel utilisateur

LIVARNO home

LIVARNO home 375304 2101 Instructions originales

Cameo

Cameo CLQS40WW Manuel utilisateur

Leviton

Leviton Ellipsoid 5/50 Manuel utilisateur

Monacor

Monacor img Stage Line PARL-56PDX/CR Manuel utilisateur

Vector

Vector SL3AKV Manuel utilisateur

Quantum

Quantum Q262 Manuel d'exploitation

Philips

Philips Vari-lite VL3015LT Manuel utilisateur

EUROSPOT

EUROSPOT C51 Manuel utilisateur

DTS

DTS MINI BRICK ARC Manuel utilisateur

Federal Signal Corporation

Federal Signal Corporation VISIBEAM II Manuel

ACME

ACME LED-MS350B Manuel utilisateur

EuroLite

EuroLite Akku flat light 1 Manuel utilisateur

Commercial Electric

Commercial Electric SPTM-1401 Manuel utilisateur

Vision & Control

Vision & Control SLB-500-W5K7-P-SL Manuel utilisateur

Teknik

Teknik FLEXI Manuel utilisateur

Craftsman

Craftsman CMXLSB10 Manuel utilisateur

EuroLite

EuroLite LED SLS-144 UV Floor Spot Manuel utilisateur

imenco SeaLED 300 Manuel utilisateur

Manuels Mettre en lumière populaires d'autres marques