iMartine D900C Manuel utilisateur
Welcome to iMartine
Model: iMartine D900C
Please download our application by searching "JoyHome" in the Apple APP
Store or Google Play. You can also scan the below QR code to download it
to your phone.
01
As a first-time user, please open the JoyHome APP and tap “Register new account” to
complete the registration process. If you have an user account already, please skip the
above step to login.
Under registration, please choose the correct Country/Region. If you cannot receive the
Verification Code through phone, please try to register via an e-mail address. When you
are checking the Verification Code in E-mail Box, please also check the Spam Box.
02
03
* Only 2.4 G Wi-Fi signal is supported. Make sure your Wi-Fi signal is 2.4 G before connecting.
* The distance among Wi-Fi router, vacuum and phone should be short when connecting.
* Log out first when you need to connect the vacuum to other phones.
Configure Network and Connection
General Mode
1. Turn on the Main Switch on the bottom of the vacuum.
2. Make sure the Wi-Fi indicator light on the vacuum is rapidly blinking (twice per second).
If not, please press and hold the Auto & Home Buttons together on the surface of the
vacuum for 5 seconds until you hear two beeping sounds.
3. Tap the "Confirm indicator rapidly blink" on the APP.
1. Choose your Wi-Fi name, and then enter the Wi-Fi password correctly.
2. Please be noted if you enter a wrong password, the APP will not inform you.
Step 1: Start to Connect
Step 2: Enter Correct Wi-Fi Password
04
Step 3: Connect Successfully
Wait for seconds until the APP shows your vacuum in the list.
05
AP Mode
* If you can not connect your phone to the vacuum under the general mode, please change
to choose the AP Mode.
1. Turn on the Main Switch on the bottom of the vacuum.
2. Open the APP, choose your device series, and then tap the "AP Mode" on the Top Right Corner.
Step 1: Choose the AP Mode
Step 2: Before Connecting
1. Make sure the Wi-Fi indicator light on the vacuum is slowly blinking rather than
blinking very fast. If not, press and hold the Auto & Home Buttons together on
the surface of the vacuum for 5 seconds until you hear two beeping sounds,
at this moment the Wi-Fi light is rapidly blinking. And then immediately repeat
to press and hold the Auto & Home Buttons together for 5 seconds for the
second time, until you hear two beeping sounds again. Now the Wi-Fi
indicator light becomes slowly blinking.
2. Tap the "Confirm indicator slowly blink" on the APP.
3. Choose your Wi-Fi name and enter its correct password, then tap "OK".
4. Please be noted if you enter the password wrong, the APP will not inform you.
06
Step 3: Start to Connect
1. Tap "Go connect" and the phone will automatically open your setting page or your WLAN list.
2. Choose the Vacuum Name (SmartLife-XXXX) in your WLAN list and wait for the √ showing.
3. Back to the JoyHome APP and tap “config” to continue connecting.
4. Wait for seconds until the APP shows your vacuum in the list.
07
Connect to Alexa (Amazon Echo) or Google (Google Home)
Before Connecting
1. Make sure the vacuum has been connected to the JoyHome APP already.
2. Plug in your Alexa or Google device in advance.
Connecting
1. Add a new device in Amazon Alexa or Google Home and choose yours, if you have get your
device connected before, please skip this step.
2. Search “smart life” under the “Skills & Games” page in Amazon Alexa or under “Home Control”
page in Google Home.
3. Enable the “smart life” to use, it will automatically open a web page.
4. Enter your JoyHome account and password in the web page, and tap “Link Now”.
Help
Tap your account head portrait in the JoyHome APP, and refer to “More Services” for more
detailed instructions.
Please contact us by e-mail for video guidance if you have troubles in connecting.
08
4
09
Alexa Commands
Word of Command
Google Commands
Word of CommandFunction
Start
Stop
Back to charging dock
Find the vacuum
Note: the [vacuum name] defaults to “Robot” and can be edited as you like.
Alexa, turn on [vacuum name]
Alexa, turn off [vacuum name]
Ok, google, turn on [vacuum name]
Ok, google, turn off [vacuum name]
Ok, google, [vacuum name] go home
Ok, google, where is [vacuum name]
Table des matières
Autres manuels iMartine Aspirateur
