Imagistics Sx1480 Manuel utilisateur

Second Phone Line Kit

Manual for sx1480/fx2080

Contents

Regulatory information ................................................................................... i

Users in United States of America............................................................................ i

FCC Part 15 .......................................................................................................... ii

Users in Canada.......................................................................................................iii

Canadian ICES-003 .............................................................................................iii

Setting up ....................................................................................................... 1-1

Connecting the telephone line cable ..................................................................... 1-1

Entering settings ................................................................................................... 1-2

For fx2080 users................................................................................................. 1-3

For sx1480 users .............................................................................................. 1-12

Transmission .................................................................................................. 2-1

Dialing to a PSTN.................................................................................................. 2-1

Dialing within a PBX............................................................................................. 2-1

PBX dialing with the numeric keys .................................................................. 2-1

PBX dialing with the autodialler ...................................................................... 2-3

Manual line selection............................................................................................. 2-4

Selecting the phone line manually.................................................................... 2-4

Example of use ....................................................................................................... 2-6

(1) If Line 1 and Line 2 are set for outside line (PSTN) use............................ 2-6

(2) If Line 1 is set PSTN and Line 2 is set to PBX

(PSTN access number is not registered) ......................................................2-7

(3) If Line 1 is set PSTN and Line 2 is set to PBX

(PSTN access number is registered).............................................................2-8

(4) If you transmit and receive documents equally on a regular basis. .......... 2-9

(5) If you transmit documents more often than you receive them. ............... 2-10

Appendix.......................................................................................................... 3-1

Error code............................................................................................................... 3-1

“Check Message” printouts................................................................................ 3-2

Communication setting ......................................................................................... 3-3

Phone line type setting .......................................................................................... 3-3

Speciﬁcations.......................................................................................................... 3-4

Regulatory information

Users in United States of America

This equipment complies with Part 68 of FCC rules and the requirements

adopted by the ACTA. On the rear panel of this equipment is a label that

contains, among other information, a product identiﬁer in the format US:

MGFA02B003C (for sx1480), US: IMGFA02B004C (for fx2080). If required,

this number must be provided to the telephone company.

The REN is used to determine the number of devices that may be connected

to a telephone line. Excessive RENs on a telephone line may result in the

devices not ringing in response to an incoming call. In most but not all areas,

the sum of RENs should not exceed ﬁve (5.0). To be certain of the number of

devices that may be connected to a line, as determined by the total RENs,

contact the local telephone company. The REN for this product is part of the

product identiﬁer that has the format US:IMGFA02B003C (for sx1480), US:

IMGFA02B004C (for fx2080). The digits represented by 02B are the REN

without a decimal point.

Your fax is designed for use on standard-device telephone lines. The fax con-

nects to the telephone line with a standard line called the USOC RJ-11C.

A plug and jack used to connect this equipment to the premises wiring and

telephone network must comply with the applicable FCC Part 68 rules and

requirements adopted by the ACTA. A compliant telephone cord and modular

plug is provided with this product. It is designed to be connected to a compat-

ible modular jack that is also compliant. See installation instructions for

details.

If the equipment sx1480/fx2080 causes harm to the telephone network, the

telephone company will notify you in advance that temporary discontinu-

ance of service may be required. But if advance notice isn’t practical, the

telephone company will notify the customer as soon as possible. Also, you will

be advised of your right to ﬁle a complaint with the FCC if you believe it is

necessary.

The telephone company may make changes in its facilities, equipment, opera-

tions or procedures that could affect the operation of the equipment. If this

happens the telephone company will provide advance notice in order for you

to make necessary modiﬁcations to maintain uninterrupted service.

If trouble is experienced with the equipment sx1480/fx2080, see operating

instructions for details. For further repair or warranty information, please

contact Imagistics National Diagnostic Center at 1-800-243-5556). If the

equipment is causing harm to the telephone network, the telephone company

may request that you disconnect the equipment until the problem is resolved.

Connection to party line service is subject to state tariffs. Contact the state

public utility commission, public service commission or corporation commis-

sion for information.

If your home has specially wired alarm equipment connected to the telephone

line, ensure the installation of the sx1480/fx2080 does not disable your alarm

equipment. If you have questions about what will disable alarm equipment,

consult your telephone company or a qualiﬁed installer.

This equipment is hearing aid compatible.

When programming emergency numbers and/or making test calls to emer-

gency numbers:

1) Remain on the line and brieﬂy explain to the dispatcher the reason for the

call.

2) Perform such activities in the off-peak hours, such as early morning or late

evenings.

To protect your product against power surges, we recommend the use of a

power protection device (Surge arrestor).

The Telephone Consumer Protection Act of 1991 makes it unlawful for any

person to use a computer or other electronic device, including FAX machines,

to send any message unless such message clearly contains in a margin at the

top or bottom of each transmitted page or on the ﬁrst page of the transmis-

sion, the date and time it is sent and an identiﬁcation of the business or

other entity, or other individual sending the message and the telephone num-

ber of the sending machine or such business, other entity, or individual. (The

telephone number provided may not be a 900 number or any other number

for which charges exceed local or long-distance transmission charges.)

For instructions on programming this information into your FAX machine,

see “Entering settings” on pages 1-2 to 1-17 of this manual.

FCC Part 15

This equipment has been tested and found to comply with the limits for a

Class A digital devices, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equip-

ment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

iii

Users in Canada

NOTICE: This equipment meets the applicable Industry Canada Terminal

Equipment Technical Speciﬁcations.

NOTICE: The Ringer Equivalence Number (REN) for this terminal equip-

ment is 0.2. The REN assigned to each terminal equipment provides an

indication of the maximum number of terminals allowed to be connected to

a telephone interface. The termination on an interface may consist of any

combination of devices subject only to the requirement that the sum of the

Ringer Equivalence Numbers of all the devices does not exceed ﬁve.

Canadian ICES-003

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du

Canada.

1-1

Setting up

Connecting the telephone line cable

1Loop the telephone line cable and attach the ferrite core as

shown. The cable loop should be about 5.1 cm (2 inches) from

the end. The ferrite core is supplied with the second phone line

kit.

2Plug one end of the telephone line cable into the “Line2” jack

on the machine. Plug the other end of the cord into a standard

telephone wall jack.

LINE2

1-2

Entering settings

The following table lists the settings should be set when the second

phone line (Line 2) has been installed. You can set these settings by

using the User install mode described from page 1-3.

Settings Description

Comm. Line type

(Phone type)

Set the appropriate dialing type needed for

the fax machine, either “Tone” or “Pulse”.

Dial Tone detection If you select “On”, the machine does not

dial until it detects a dial tone from the

exchanger with which the machine is con-

nected. However, there is a situation the

machine may not dial although it acquires a

dial tone because it is difﬁcult to correspond

to all of various dial tones. In this case, turn

off the dial tone detection.

TTI (Transfer Terminal

Identiﬁer)

Three types of sender names can be regis-

tered, each containing up to 22 characters.

Default TTI

(Usual TTI)

Select the TTI that will be used most often.

The selected TTI will be printed at the top of

every page you send with your fax number.

TTI Number

(Your fax number)

The registered fax number will be printed at

the top of every page you send with the stan-

dard TTI. Up to 20 digits can be registered.

Transmit Line Mode

(Line Mode)

Select according to your usage requirement.

When you choose “Auto Select”, the machine

will select the line automatically for all

transmissions.

When you choose “Manual Select”, you can

select the line for each transmission.

Tx/Rx Select either “Tx/Rx (sending and receiv-

ing)”, “Rx (receive only)” or “Tx (transmission

only)” to determine how the telephone line

will be used.

PSTN/PBX

(Line Type)

Select the line type from “PSTN” or “PBX”.

When the line is connected to outside line

directly, select “PSTN”.

When the line is connected to an extension

exchanger, select “PBX”.

NOTE: Regarding the fax reception mode, you can select either Fax ready, Fax/

Tel ready, Tel/Fax ready, Ans./Fax ready or Tel ready for the Line 1 only.

For the Line 2, it is ﬁxed to Fax Ready and you cannot change it.

1-3

For fx2080 users

qOpening the User Install menu display

1Press [Setting] button on the control panel.

2Press [User Install].

The User Install menu will appear.

3Set each setting.

The following table shows the referring page of each setting.

Settings Referring page

Comm. Line Page 1-4

DialTone Detect Page 1-5

TTI Enter/Edit Page 1-6

Default TTI Page 1-7

TTI Number Page 1-8

Transmit Line Mode Page 1-9

Tx/Rx Page 1-10

PSTN/PBX Page 1-11

4After registering the settings, press [Reset] button to return to

the standby.

1-4

qComm. Line setting

Select the dialing type, either “Tone” or “Pulse” for each phone line.

1Open the User Install menu. (Refer to page 1-3.)

2To set the dialing type for the Line 1, press [Comm. Line(Line1)].

To set the dialing type for the Line 2, press [Comm. Line(Line2)].

3Select the appropriate dialing type.

4Press [Enter] to save the setting.

Autres manuels pour sx1480

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels imagistics Accessoires pour imprimantes

imagistics

imagistics DL750 Manuel utilisateur

Manuels Accessoires pour imprimantes populaires d'autres marques

Star Micronics

Star Micronics TSP800 Series Manuel utilisateur

REA

REA JET HR pro 2K Manuel utilisateur

HP Laserjet,Color Laserjet 4si Manuel utilisateur

oliser

oliser MS 45 Manuel utilisateur

Roland

Roland DU2-64 Instructions et recettes

Xerox

Xerox EFI EXP6000 Manuel utilisateur

Canon

Canon Finisher-T1 Manuel utilisateur

Sharp

Sharp FO-1MK Manuel utilisateur

Labelmate

Labelmate PM-300 Manuel utilisateur

Epson

Epson T6248 Manuel d'utilisation

Epson

Epson OT-BZ20 Manuel utilisateur

Canon

Canon TonerRobot EP-27 Manuel utilisateur

Ricoh

Ricoh LCIT RT5100 Guide de démarrage rapide

GBC

GBC 16 Series Manuel utilisateur

Canon

Canon INNER 2-WAY TRAY-E1 Manuel d'utilisation et d'entretien

Develop

Develop SD-509 Manuel utilisateur

Kyocera

Kyocera KM-6230 Manuel

Triumph Adler

Triumph Adler DF-710 Manuel

imagistics sx1480 Manuel utilisateur

Manuels Accessoires pour imprimantes populaires d'autres marques