imagistics cm3520 Manuel utilisateur
www.imagistics.com
cm3520
Enlarge Display Mode User's Guide
Introduction
i
Introduction
This User’s Guide contains details on the operation
of the various functions available in the Enlarge Dis-
play mode and on the various operating precau-
tions. In order to ensure that this machine is used
correctly and efficiently, carefully read this guide
before using the machine.
After reading this guide, store it in the designated
holder so that it can easily be referred to when
questions or problems arise during operation.
The model illustrated in this guide may differ from
your machine.
TSS2_Enlarge_E.book Page i Thursday, June 3, 2004 10:51 AM
Contents
ii
Contents
The topics listed below are described in the Enlarge
Display Mode Operations Guide. For details on oth-
er topics, refer to the User’s Guide.
✎
Additional Information
The descriptions in this guide show sample
screens with inch measurements.
The same setting in screens with metric mea-
surements can be specified using the same pro-
cedure.
1 Before Making Copies
1.1 Explanation of Guide Conventions.. 1-2
1.2 Control Panel Parts and
Their Functions ................................. 1-4
1.3 Adjusting the Angle of the
Control Panel ..................................... 1-8
To lower the angle of the control
panel.................................................... 1-9
To raise the angle of the control
panel.................................................... 1-9
1.4 Touch Panel ..................................... 1-10
Displaying the enlarged
Basic screen...................................... 1-10
Touch panel operation....................... 1-12
Keys displayed in the touch panel..... 1-13
TSS2_Enlarge_E.book Page ii Thursday, June 3, 2004 10:51 AM
Contents
iii
Paper type icons.................................1-15
Paper supply icons.............................1-17
To use the Volume Track mode .........1-18
2 Paper Settings
2.1 Paper Settings ....................................2-2
To specify a non-standard (custom)
paper size for the 1st drawer................2-2
To store a non-standard (custom)
paper size for the 1st drawer................2-7
To specify a paper size setting for the
1st drawer...........................................2-11
To specify a non-standard (custom)
paper size for the multiple
bypass tray.........................................2-13
To store a non-standard (custom)
paper size for the multiple
bypass tray.........................................2-18
To specify a paper size setting for the
multiple bypass tray............................2-22
To specify the paper type for the
multiple bypass tray............................2-24
3 Original Documents
3.1 Loading the Document ......................3-2
Loading the Document Into the Reverse
Automatic Document Feeder................3-2
Placing the Document On the Original
Glass ....................................................3-5
TSS2_Enlarge_E.book Page iii Thursday, June 3, 2004 10:51 AM
Contents
iv
4 Useful Operations
4.1 Basic Copying ................................... 4-2
To make copies ................................... 4-2
4.2 Stopping Copying ............................. 4-6
To stop a copy job ............................... 4-6
To restart the copy job......................... 4-7
4.3 Queuing a Copy Job for the Multiple
Bypass Tray ....................................... 4-8
To queue a copy job for the
multiple bypass tray............................. 4-8
4.4 Interrupting a Copy Job.................. 4-12
5 Specifying Copy Settings
5.1 Selecting a Color Setting.................. 5-2
To select the Color setting................... 5-2
5.2 Selecting Output Settings ................ 5-4
To specify Output settings................... 5-5
5.3 Specifying a Zoom Setting ............... 5-7
To specify a Zoom setting ................... 5-8
To specify a zoom ratio ..................... 5-10
To select the “Auto Zoom”setting ..... 5-11
To specify a Reduce or Enlarge
setting................................................ 5-13
To specify a manual zoom ratio ........ 5-15
To store a manual zoom ratio............ 5-17
To recall a stored manual zoom
ratio ................................................... 5-19
TSS2_Enlarge_E.book Page iv Thursday, June 3, 2004 10:51 AM
Contents
v
To specify different vertical and
horizontal scaling proportions
(X/Y Zoom settings)............................5-21
5.4 Selecting a Paper Setting ................5-23
To select the Paper setting.................5-24
5.5 Selecting Original Setting................5-26
To select an Original setting...............5-27
5.6 Selecting Copy Settings ..................5-30
To select a Copy setting.....................5-31
5.7 Selecting a Photo/Density Setting..5-33
To select an Original Image Type
setting.................................................5-34
To select the Background, Density,
Text Enhancement and “Glossy Mode”
settings...............................................5-37
5.8 Checking the Settings......................5-40
To check the settings .........................5-40
To change the settings.......................5-44
6 Accessibility Mode Operations
6.1 Setting the “Key Repeat Start/Interval”
Function ..............................................6-2
Key repeat start time and key repeat
interval..................................................6-2
To specify the key repeat start time
and key repeat interval.........................6-3
TSS2_Enlarge_E.book Page v Thursday, June 3, 2004 10:51 AM
Contents
vi
6.2 Setting the “Enlarge-Display Notice”
Function ............................................. 6-5
To specify whether the confirmation
message for canceling the
Enlarge Display mode appears ........... 6-6
Operations for the confirmation
message for canceling the
Enlarge Display mode ......................... 6-8
Outline of the Confirmation to
Cancel the Enlarge Display Mode ....... 6-9
7 Managing Jobs
7.1 Overview of Jobs............................... 7-2
Jobs..................................................... 7-2
7.2 Displaying the Job List Screen ........ 7-3
7.3 Deleting a Job.................................... 7-4
To delete a queued job........................ 7-4
To delete a job that is being printed .... 7-6
7.4 Job List Screens................................ 7-8
Active Jobs screen .............................. 7-8
Active Scans screen............................ 7-9
Stocked List screen ........................... 7-10
Locked List screen ............................ 7-12
Print Log screen ................................ 7-14
Scan Log screen ............................... 7-15
TSS2_Enlarge_E.book Page vi Thursday, June 3, 2004 10:51 AM
Before Making Copies Chapter 1
1
1Before Making
Copies
This chapter provides information
that is important to know before mak-
ing copies.
TSS2_Enlarge_E.book Page 1 Thursday, June 3, 2004 10:51 AM
11.1 Explanation of Guide Conventions
1-2
Before Making Copies Chapter 1
1.1 Explanation of Guide Conven-
tions
CAUTION
Failure to observe instructions highlighted in
this manner may result in serious injuries or
property damage.
➜Observe all cautions in order to ensure safe use
of this machine.
✎
Reminder!
Text highlighted in this manner indicates opera-
tion precautions. Carefully read and observe this
type of information.
✎
Additional Information
Text highlighted in this manner provides more de-
tailed information concerning the operating pro-
cedure.
}Reference
Text highlighted in this manner indicates sec-
tions containing additional information. If neces-
sary, refer to the indicated sections.
TSS2_Enlarge_E.book Page 2 Thursday, June 3, 2004 10:51 AM
1.1 Explanation of Guide Conventions 1
1-3
Before Making Copies Chapter 1
[ ] This indicates a key either on the touch panel
or on the control panel.
TSS2_Enlarge_E.book Page 3 Thursday, June 3, 2004 10:51 AM
Autres manuels pour cm3520
2
Table des matières
