Imagistics DL200 Manuel utilisateur

www.imagistics.com

Operating Manual

For use with Imagistics and Pitney Bowes DL200/270/370 copier/printers.

DL200

DL270

DL370

P-1

This section contains detailed instructions on the operation and maintenance of this machine. To

achieve optimum utility of this device, all operators should carefully read and follow the instructions

in this manual. Please keep this manual in a handy place near the machine.

Please read the next section before using this device. It contains important information related

to user safety and preventing equipment problems.

Make sure you observe all of the precautions listed in this manual.

*Please note that some parts of the contents of this section may not correspond with the purchased

product.

■

■ ■

■ Warning and Precaution Symbols

■

■■

■Meaning of Symbols

SAFETY INFORMATION

Ignoring this warning could cause serious injury or

even death.

Ignoring this caution could cause injury or damage to

property.

A triangle indicates a danger against which you should take precaution.

This symbol warns against cause burns.

A diagonal line indicates a prohibited course of action.

This symbol warns against dismantling the device.

A black circle indicates an imperative course of action.

This symbol indicates you must unplug the device.

PL 02

P-2

• Do not modify this product, as a fire, electrical shock, or breakdown could result.

If the product employs a laser, the laser beam source could cause blindness.

• Do not attempt to remove the covers and panels which have been fixed to the

product. Some products have a high-voltage part or a laser beam source inside that

could cause an electrical shock or blindness.

• Only use the power cord supplied in the package. Failure to use this cord could

result in a fire or electrical shock.

• Use only the specified power source voltage. Failure to do that could result in a

fire or electrical shock.

• Do not use a multiple outlet adapter to connect any other appliances or machines.

Use of a power outlet for more than the marked current value could result in a fire

or electrical shock.

Do not unplug and plug in thepower cord with a wet hand, as an electrical shock

could result.

Plug the power cord all the way into the power outlet. Failure to do this could

result in a fire or electrical shock.

• Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or dam-

age the power cord. Use of a damaged power cord (exposed core wire, broken

wire, etc.) could result in a fire or breakdown.

Should any of these conditions be found, immediately turn OFF the power switch,

unplug the power cord from the power outlet, and then call your authorized ser-

vice representative.

• In principle, do not use an extension cord. Use of an extension cord could cause a

fire or electrical shock. Contact your authorized service representative if an

extension cord is required.

P-3

Do not place a flower vase or other container that contains water, or metal clips or

other small metallic objects on this product. Spilled water or metallic objects

dropped inside the product could result in a fire, electrical shock, or breakdown.

Should a piece of metal, water, or any other similar foreign matter get inside the

product, immediately turn OFF the power switch, unplug the power cord from the

power outlet, and then call your authorized service representative.

• If this product becomes inordinately hot or emits smoke, or unusual odor or noise,

immediately turn OFF the power switch, unplug the power cord from the power

outlet, and then call your authorized service representative. If you keeponusing it

as is, a fire or electrical shock could result.

• If this product has been dropped or its cover damaged, immediately turn OFF the

power switch, unplug the power cord from the power outlet, and then call your

authorized service representative. If you keep on using it as is, a fire or electrical

shock could result.

Do not throw the toner cartridge or toner into an open flame. The hot toner may

scatter and cause burns or other damage.

Connect the power cord to an electrical outlet that is equipped with a grounding

terminal.

P-4

• Do not use flammable sprays, liquids, or gases near this product, as a fire could

result.

• Do not leave a toner unit or drum unit in a place within easy reach of children.

Licking or ingesting any of these things could injure your health.

• Do not let any object plug the ventilation holes of this product. Heat could accu-

mulate inside the product, resulting in a fire or malfunction.

• Do not install this product at a site that is exposed to direct sunlight, or near an air

conditioner or heating apparatus. The resultant temperature changes inside the

product could cause a malfunction, fire, or electrical shock.

• Do not place the product in a dusty place, or a site exposed to soot or steam, near a

kitchen table, bath, or a humidifier. A fire, electrical shock, or breakdown could

result.

• Do not place this product on an unstable or tilted bench, or in a location subject to

a lot of vibration and shock. It could drop or fall, causing personal injury or

mechanical breakdown.

• After installing this product, mount it on a secure base. If the unit moves or falls,

it may cause personal injury.

• Do not store toner units and PC drum units near a floppy disk or watch that are

susceptible to magnetism. They could cause these products to malfunction.

The inside of this product has areas subject to high temperature, which may cause

burns. When checking the inside of the unit for malfunctions such as a paper mis-

feed, do not touch the locations (around the fusing unit, etc.) which are indicated by

a “Caution ! High Temperature !” warning label.

Do not place any objects around the power plug as the power plug may be difficult

to pull out when an emergency occurs.

The socket-outlet shall be installed near the machine and shall be easily accessible

as the power plug may be difficult to pull out when an emergency occurs.

P-5

• Always use this product in a well ventilated location. Operating the product in a

poorly ventilated room for an extended period of time could injure your health.

Ventilate the room at regular intervals.

• Whenever moving this product, be sure to disconnect the power cord and other

cables. Failure to do this could damage the cord or cable, resulting in a fire, elec-

trical shock, or breakdown.

• When moving this product, always hold it by the locations specified in the opera-

tor’s manual or other documents. If the unit falls it may cause severe personal

injury. The product may also be damaged or malfunction.

• Remove the power plug from the outlet more than one time a year and clean the

area between the plug terminals. Dust that accumulates between the plug termi-

nals may cause a fire.

• When unplugging the power cord, be sure to hold onto the plug. Pulling on the

power cord could damage the cord, resulting in a fire or electrical shock.

P-6

Precautions for Routine Use

• Do not store toner units, PC drum units, and other supplies and consumables in a

place subject to direct sunlight and high temperature and humidity, as poor

image quality and malfunction could result.

• Do not attempt to replace the toner unit and PC drum unit in a place exposed to

direct sunlight. If the PC drum is exposed to intense light, poor image quality

could result.

• Do not unpack a toner unit or PC drum unit until the very time of use. Do not

leave an unpacked unit standing. Install it immediately or poor image quality

could result.

• Do not keep toner units and PC drum units in an upright position or upside

down, as poor image quality could result.

• Do not throw or drop a toner unit or PC drum unit as poor image quality could

result.

• Do not use this product in an area where ammonia or other gases or chemicals

are present. Failure to do so may shorten the service life of the product, cause

damage or decrease performance.

• Do not use this product in an environment with a temperature outside the range

specified in the operator’s manual, as a breakdown or malfunction could result.

• Do not attempt to feedstapled paper, carbon paper or aluminum foil through this

product, as a malfunction or fire could result.

Do not touch or scratch the surface of the toner unit, developing roller and the

PC drum, as poor image quality could result.

Use the supplies and consumables recommended by the dealer. Use of any sup-

ply or consumable not recommended could result in poor image quality and

breakdown.

What is an ENERGY STAR®Products?

An ENERGY STAR® product has a special feature that allows it to automatically switch to a “low-power

mode” after a period of inactivity. An ENERGY STAR® product uses energy more efficienty, saves you

money on utility bills and helps protect the environment.

As an ENERGY STAR®Partner, we have determined that this machine

meets the ENERGY STAR®Guidelines for energy efficiency.

This operator’s manual explains how to operate the machine and replenish its supplies. It also gives

some troubleshooting tips as well as general precautions to be observed when operating the machine.

To ensure the best performance and effective use of your machine, read this manual carefully until you

familiarize yourself thoroughly with its operation and features. After you have read through the

manual, keep it ready for reference.

Please use this manual as a quick and handy reference tool for immediately clarifying any questions

which may arise.

For the U.S.A. Users

FCC Part 15-Radio Frequency Devices

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and radiate radio frequency energy and if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

WARNING: The design and production of this unit conform to FCC Regulations, and any changes or

modifications must be registered with the FCC and are subject to FCC control. Any changes made by

purchaser or user without first contacting the manufacturer will be subject to penalty under FCC

regulations.

This device must be used with shielded interface cables. The use of non-shield cables is likely to result

in interference with radio communications and is prohibited under FCC rules.

For Canada Users

Interference-Causing Equipment Standard (ICES-003 Issue 3)

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels imagistics Imprimante tout-en-un

imagistics

imagistics 9830 Manuel utilisateur

imagistics

imagistics im9220 Manuel utilisateur

imagistics

imagistics im3510 Manuel utilisateur

imagistics

imagistics im5520 Manuel utilisateur

imagistics

imagistics DL460 Manuel utilisateur

imagistics

imagistics 1630 Manuel utilisateur

imagistics

imagistics DF260 Manuel utilisateur

imagistics

imagistics sx2100 Manuel utilisateur

imagistics

imagistics DL850 Manuel utilisateur

imagistics

imagistics ipc1-im8130 Manuel

imagistics

imagistics ipc1-im8130 Manuel de service

imagistics

imagistics cm4530 Guide de configuration

imagistics

imagistics DL260 Manuel utilisateur

imagistics

imagistics fx2100 Manuel utilisateur

imagistics

imagistics ipc1- im8130 Manuel de service

imagistics

imagistics 9920 Manuel utilisateur

imagistics

imagistics im8130 Manuel utilisateur

imagistics

imagistics im5520 Manuel

imagistics

imagistics DF200 Manuel utilisateur

imagistics

imagistics CM4520 Manuel utilisateur

imagistics

imagistics im2520f Manuel utilisateur

imagistics

imagistics DL155 Manuel utilisateur

imagistics

imagistics cm4530 Manuel utilisateur

imagistics

imagistics DL750 Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C35 Manuel utilisateur

Brother

Brother MFC-J430w Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 558 Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel

Brother

Brother MFC-9760 Manuel utilisateur

Lexmark

Lexmark XC8155 Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Canon

Canon ImageCLASS 2300 Manuel

Ricoh

Ricoh Pro C900 Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur

imagistics DL200 Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques