•Select Share As
•Type Share Name: This Share name will be displayed on
Client Windows Explorer
“CD-ROM” or “Floppy Disk”
c. Insert Software CD on the CD-ROM or Floppy Disk
diskette (PC or Server)
d. Install software on TD2015 through the network.
(CD-ROM or Floppy Disk located on the Server, the
TD2015 Client working as a local Device)
4. Installation Operating System (Reference)
4.1 Minimum Hardware Requirements
•1 Floppy Drive for Booting
•1 CD Drive contains a source Image, labeled Win98-02
•1 target Hard Drive
4.2 Software Requirement
MS-DOS version 6.22 with CD driver or Win98 Startup diskette
Norton Ghost Utility, Personal Edition
4.3 Installation Procedure
a. Setup the basic system with an IBM compatible PC
configured with 1 3.5-inch floppy drive, 1 Hard Drive and 1
CD-ROM drive.
b. Boot the system from the boot diskette in 3.5-inch floppy drive.
c. Change the drive to the CD ROM, usually C: or D: drive
depending on the system’s configuration.
d. Run 'ghostpe' in the CD ROM drive. It is faster than by floppy.
e. SelectLocal->Disk->From Image in the Ghost menu.
The Win98-xx.GHO image in CD ROM will be displayed.
f. Select the image you want to use and click “Enter”.
g. Select the destination drive and click 'OK' button.
h. Click “Yes” in the confirmation window.
