Preface
Piezo Scaler is developed based on the Principle of piezoelectric. Ultrasonic waves are generated in
the handpiece by 4 ceramic piezoelectric plates subjected to high frequency alternation current.
The Tip is vibrated back and forth in high speed to perform tooth calculus and/or tartar cleaning
task. Particularly, the high speed vibrated Tip can remove the toughest calculus and tartar easily,
and in conjunction with syringe (or saliva ejector), the scaler can conveniently and swiftly clean
teeth and most importantly it is proven to be electrically safe. The electric-mechanical efficiency
of this piezoelectric system is much greater than that of traditional magnetostrictive systems. There
is very little heat released, and it is possible to work with very little spray. It’s sufficient to ensure
excellent cavitations but more comfortable for both the patient and the dental surgeon.
The unit is a very powerful apparatus. There are linear scales of power adjustment for removing
prostheses. This allows very fine adjustment to suit each clinical situation.
With a large range of Tips, the unit is suitable with different kinds of works.
iM3 - P4
Operation Modes:
Perio, Scaling and Endo
Operation Frequency: 29 KHz
Stable and Fine Power Setting
Various Types of TIP Available
No Heat Generation of Handpiece
Special notes to operator:
Since the tip of scaler is made of stainless steel, avoid direct contact to patient's mouth; it may
cause damage to the enamel of the teeth. To better utilize all the functions and maximize the
performance of the scaler, it is suggested that before applying to patients, doctors should
practice on models/aluminum plates to familiarize themselves with the usage of the scaler tips,
the subtle motion force of the insert, etc.
