IKIER R2 Manuel utilisateur

R2 Roller Installation Manual

Note: The picture is for reference only, subject to the real thing.

Please scan the two-dimensional code for more information.

English

F03-0136-0AA1

Versions：A

Packing List

Roller body*1Pcs Bracket*1Pcs

Sequence line*1Pcs Reverse sequence line*1Pcs

Installation Guide

Step 1: Roller

Motor

Roller block

Base

Roller block

Roller

Installation Guide

Step 2: Choose dierent gears to install according to the engraved items

Gear 1： 10mm≤ d ≤20mm

Gear 3： 40mm≤ d ≤50mm Gear 4：50mm≤ d ≤80mm

Gear 2： 30mm≤ d ≤40mm

Installation Guide

Step 3: Adjust Gear

3.1 Select dierent gears according to the engraved items.

3.3 Move the motor to tighten the belt and tighten the screws at

the bottom of the motor.

3.4 Adjust the bracket installation: choose dierent gears according to the

engraved special-shaped items, and move the bracket to a suitable position.

3.2 Move the roller to the appropriate gear and tighten the screw.

The roller has two connecting wires, the black plug and the white plug, please note that their wiring sequence is dierent and you need to connect carefully.

The 4PIN white plug wire is used to connect IKIER laser engraving machine.

The 4PIN black plug wire is used to connect the third-pay laser engraving machine.

The roller kit suppos IKIER and third-pay laser cutters and engravers. You need to connect it to the device and use the corresponding software to operate it. If it cannot

be connected, please change the order of the wires, and the change process is shown in Figure 1.1-1.2.

Installation Guide

Step 4: Wiring Instructions

Connection socket

White plug wire

Black plug wire

1.1 Connection sequence of white plug wire 1.2 Connection sequence of black plug wire

Y-axis motor cable plug

Chuck motor plug

Y-axis motor cable plug

Chuck motor plug

Use LightBurn

1. Add "Enable Rota" to main window

1.1 Click "Settings" on the toolbar

1.2 In the settings window, turn on the "Show rota enable on main window" button, and click OK.

Show rota enable on main window

Enable Rota

Use LightBurn

2. Open the Rota Setup window and set the parameters

2.1 Open the Rota Setup window: Click "Laser Tools" on the toolbar and then click "Rota Setup"

2.2 Set the correct parameters in the Rota Setup window: As shown in the gure

Steps:

(1) Select the rota type: Roller Type

(2) Turn on "Enable Rota"

(3) Select the "Y Axis" rota axis

(4) Input the parameters (xed value) of the rota equipment

(5) Enter the parameters of your engraved object: The actual measured diameter

or circumference of the engraved object

Rota Setup

Parameters of rotation

The parameters of your sculpted odject

Use LightBurn

3. Impo the pattern you want to engrave, set the size of the pattern, and set the engraving power and speed.

4. You can click "Frame" to preview the position of the pattern to be engraved, and then move the laser head to the expected

position. It is recommended to use "Current Position" as the staing location, and click "Sta" after completing the settings.

Customer seice:

For detailed warranty policy, please visit our ocial website: www.ikier.com

For technical suppo and seice, please email suppo@ikier.com

Manufacturer:

Shenzhen ikier Technologies Co.,Ltd

Address:

422, Building 1, Xili Mingliang Science and Technology Park, No.178 Zhuguang

Noh Road, Nanshan District, Shenzhen, Guangdong, China

Zip code: 518172

Scan QR code:

QR code reader/barcode scanner or any app with a scanner

Table des matières

Manuels Outils populaires d'autres marques

Martor

Martor SECUNORM 175 Manuel utilisateur

ERKCO

ERKCO 1000 Manuel utilisateur

jbc

jbc N4473 Manuel utilisateur

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuel utilisateur

Worx Professional

Worx Professional Sonicrafter WU676 Manuel utilisateur

Gage Bilt

Gage Bilt GB713SH Manuel utilisateur

Hilti

Hilti DX 9-ENP Manuel utilisateur

norbar

norbar NORTRONIC 34399 Manuel utilisateur

BGS technic

BGS technic 8578 Manuel utilisateur

Makita

Makita DHR241 Manuel utilisateur

Motor Guard

Motor Guard JMB-1250 Manuel utilisateur

Power Adhesives

Power Adhesives 805-12 Manuel utilisateur

Clemco

Clemco 24189 Manuel utilisateur

VVG

VVG VNG 903 Series Manuel utilisateur

Hilti

Hilti FX 3-A Manuel utilisateur

Grizzly

Grizzly H6472 Manuel utilisateur

axing

axing BWZ 5-02 Manuel utilisateur

Dh-Robotics

Dh-Robotics RGI-100 Comment utiliser