Ikan Rayden RB5 Manuel utilisateur

CHECKED BY

Rayden

Quick Start Guide

Rayden LED Lights

What’s Included

RB5

RW5

RB10

RW10

1 x Light Fixture

1 x Yoke Mount

1 x Neutral Density Filter

1 x Power Supply with Cable

1 x Power Supply for Dual Charger

1 x DV Dual Battery Charger

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re ﬁlmmakers too

Getting to know your Rayden Lights

PRECAUTIONS

• Keep the ﬁxture away from water and all ﬂammable gases or liquids.

• Use ONLY the recommended batteries.

• Handle the unit with care.

• DO NOT attempt to disassemble or repair the unit without ﬁrst contacting the service department at www.ikancorp.com

• Keep the unit clean and free of dust. The unit can be cleaned with a soft, dry cloth.

• Use ONLY parts provided by the manufacturer.

• Always use caution when plugging in the ﬁxture.

Mounting the Rayden to a stand

The Rayden LED light comes with a pre-installed yoke and combo mount. This allows the ﬁxture to easily sit and adjust on any

stand. The angled yoke allows the light to move freely, without obstruction. The Baby 5/8” and Junior 1-1/8” Combo pin give the

user a wide range of stands. The light can be mounted either horizontally or vertically on a 5/8” baby pin.

Power the LEDs

The Mylo light comes with an included AC power supply and 6 foot cable. This allows the user to plug into any standard 120-240v

electrical outlet. The Mylo LED light can be powered from one of two Sony “L” Style DV batteries that are supplied with the unit.

Adjusting the Color & Brightness of the Light

The Mylo LED light is controlled by the large yellow knob on the rear of the ﬁxture. The knob was designed with the idea that it

could be reached and adjusted when the light is up on a stand. The knob has two push settings.

The default setting is the brightness from 10%-100% brightness.

By pressing in on the knob, the color temperature can be adjusted. (Bi-Color lights)

Changing the Pro Battery Plate

Adding or removing the pro battery plate on the back of your ﬁxture can be easily achieved.

NOTE: The ﬁxture comes pre-installed with the Gold-Mount battery plate.

The process starts with the removal of the four screws on the four corners of the plate.

Once the screws are removed, separate the plate from the back of the ﬁxture.

Unplug the 2-pin connector from the ﬁxture.

Store the screws and the Gold-Mount in a safe place.

Reattaching the V-Mount plate is a simple process.

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re ﬁlmmakers too

Remote Control

The light can be adjusted also using the RF remote control. The use of the remote allows for multiple lights to be connected, as well as

control of the brightness.

Remote Control Button Functions

• Press & Hold “A” for 5 seconds to sync remote control to light(s)

• Press “A” to power ON/OFF (for Daylight Light only)

• Press “A”& "B" to power ON/OFF (for Bi-Color Light only)

• Press “B” to adjust 4 levels of light intensity in increments of 25%

• Press and Hold “B” for 5 seconds to Enable/Disable sound

• Hold down “C” to increase light intensity 0%-100%

• Hold down “D” to decrease light intensity 100%-0%

Optional Accessories

Some other products that work well with the Rayden lights from Ikan include:

HD-STND

ROLLR-STND10

CP-STND-V3

SW-04

KCP-703

Heavy Duty Light Stand

2 Stage Roller Stand 10 ft 6 in

Compact Light Stand Version 3

Safety Wire

Stage Clamp w/ 16mm Stud

Plug the wired 2-pin connector into the ﬁxture where we just unplugged the Gold-Mount plate at the back of the light. Orient the

holes on the plate to match up with the screw holes on the back of the ﬁxture. Using the screws supplied with the V-Mount plate,

screw in the plate until it is snug against the back of the ﬁxture. Do not over-tighten the screws.

You’re now ready to install your battery to the V-Mount plate.

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re ﬁlmmakers too

Speciﬁcations

Fixture Speciﬁcations

Light Source 608 0.06 watt LEDs

Head Type Bi-Color 5600K-3200K

Lens 45 Degree

Beam Angle 50 Degree

Lumens 1218Lm

Control / Dimming Knob Control

Build Material Heavy Duty Resin Plastic

Cooling System Passive Cooling

Yoke Baby 5/8" -- Junior 1-1/8" Combo Pin

Fixture Size 14 x 8 x 3 in.

Fixture Weight 4 lbs

Electrical Speciﬁcations

Power Supply Input: 110-220VAC

Output: 15VDC @ 4.0A

Fixture Power Consumption 36.4W; 14-18VDC

Remote Control Battery

Power Type

23A 12VDC

RB5

Rayden Bi-Color Half x 1 Studio & Field LED Light

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re ﬁlmmakers too

Speciﬁcations

Fixture Speciﬁcations

Light Source 1184 0.06 watt LEDs

Head Type Bi-Color 5600K-3200K

Lens 45 Degree

Beam Angle 50 Degree

Lumens 4559Lm

Control / Dimming Knob Control

Build Material Heavy Duty Resin Plastic

Cooling System Passive Cooling

Yoke Baby 5/8" -- Junior 1-1/8" Combo Pin

Fixture Size 14 x 14 x 3 in.

Fixture Weight 6 lbs

Electrical Speciﬁcations

Power Supply Input: 110-220VAC

Output: 15VDC @ 6.0A

Fixture Power Consumption 71W; 14-18VDC

Remote Control Battery

Power Type 23A 12VDC

RB10

Rayden Bi-Color 1 x 1 Studio & Field LED Light

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re ﬁlmmakers too

RW5

Rayden Daylight Half x 1 Studio & Field LED Light

Speciﬁcations

Fixture Speciﬁcations

Light Source 608 0.06 watt LEDs

Head Type Daylight 5600K

Lens 45 Degree

Beam Angle 50 Degree

Lumens 2506Lm

Control / Dimming Knob Control

Build Material Heavy Duty Resin Plastic

Cooling System Passive Cooling

Yoke Baby 5/8" -- Junior 1-1/8" Combo Pin

Fixture Size 14 x 8 x 3 in.

Fixture Weight 4 lbs

Electrical Speciﬁcations

Power Supply Input: 110-220VAC

Output: 15VDC @ 4.0A

Fixture Power Consumption 36.4W; 14-18VDC

Remote Control Battery

Power Type

23A 12VDC

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re ﬁlmmakers too

RW10

Rayden Daylight LED 1 x 1 Light

Speciﬁcations

Fixture Speciﬁcations

Light Source 1184 0.06 watt LEDs

Head Type Daylight 5600K

Lens 45 Degree

Beam Angle 50 Degree

Lumens 4971Lm

Control / Dimming Knob Control

Build Material Heavy Duty Resin Plastic

Cooling System Passive Cooling

Yoke Baby 5/8" -- Junior 1-1/8" Combo Pin

Fixture Size 14 x 14 x 3 in.

Fixture Weight 6 lbs

Electrical Speciﬁcations

Power Supply Input: 110-220VAC

Output: 15VDC @ 6.0A

Fixture Power Consumption 71W; 14-18VDC

Remote Control Battery

Power Type 23A 12VDC

Learn More

More dynamic information at ofﬁcial website: www.ikancorp.com

Support

Contact email: [email protected]

CONDITIONS OF WARRANTY SERVICE

• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.

• The components and maintenance service fee will be charged if the warranty period is expired.

Free Service will not be Provided in the Following Situations:(*Even if the product is still within the warranty period.)

• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.

• Damage caused by natural disaster, abnormal voltage, and environmental factors, etc.

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re ﬁlmmakers too

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Ikan Équipement d'éclairage

Ikan

Ikan RB10-3PT-KIT Manuel utilisateur

Ikan

Ikan RB5-3PT-KIT Manuel utilisateur

Ikan

Ikan Lyra LCX21 Manuel utilisateur

Ikan

Ikan MW8-5PT-KIT Manuel utilisateur

Ikan

Ikan Lightstar LSKT-001 Manuel utilisateur

Ikan

Ikan Lyra POE Light Series Manuel utilisateur

Ikan

Ikan MYLO MB-1H2Q Manuel utilisateur

Ikan

Ikan IB508-v2 Manuel utilisateur

Ikan

Ikan IFD1024 Manuel utilisateur

Ikan

Ikan Mylo MSB8-3PT-KIT Manuel utilisateur

Ikan

Ikan LSC-003 Manuel utilisateur

Ikan

Ikan CB6-2PT-KIT Manuel utilisateur

Ikan

Ikan LSP-001 Manuel utilisateur

Ikan

Ikan RW5-3PT-KIT Manuel utilisateur

Ikan

Ikan OYC15 Manuel utilisateur

Ikan

Ikan RB10-2PT-KIT Manuel utilisateur

Ikan

Ikan iLED312-v2 Manuel utilisateur

Ikan

Ikan lightstar LSW-003 Manuel utilisateur

Ikan

Ikan LHS-001 Manuel utilisateur

Ikan

Ikan IB1000 Manuel utilisateur

Ikan

Ikan LW5-2PT-KIT Manuel utilisateur

Ikan

Ikan Multi-K Manuel utilisateur

Ikan

Ikan LB5-3PT-KIT Manuel utilisateur

Ikan

Ikan WS-F100 Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur