Ikan LSC-007 Manuel utilisateur
www.ikancorp.com 713.272.8822
CHECKED BY
What’s Included
1 x 12,000 Watt Fixture Head
1 x Yoke
1 x Barn Doors
1 x Gel Holder
QUICKSTART GUIDE
LSC-007
12kW Watt HMI Fresnel Head (Lightstar)
Instructions
The Lightstar LSC-007 12000 Watt HMI Fresnel Head is a compact, dual power, fresnel light.
The fixture uses 12000w 160v G38 socket metal handle lamps.
Safety Precautions
1. The LSC-007 fixture has been designed for professional use and must be operated by qualified personnel only.
2. The 12000W fixture can only be used with the Lightstar electronic ballast that supports 12000W.
Working Conditions
The best position is tilting the fixture 90°from horizontal.
The max ambient temperature limit is ±45°C (113°F).
Please keep a minimum distance of 2 feet when close to inflammable objects.
Do not cover the ventilation holes on the fixture housing. They are necessary for proper ventilation.
Use only original parts and accessories from Lightstar.
Before hanging the fixture, make sure the suspension points are properly rated to handle the weight of the fixture.
It is ALWAYS advisable to add a safety cable or chain through the yoke to properly suspend the fixture in place.
WARNING: DO NOT USE THE LSC-007 IN A SPACE WITH FLAMMABLE SUBSTANCES.
WARNING: UV RISK / HEALTH RISK. THE LAMPS USED WITH THE LSC-007 EMIT AN AMOUNT OF UV RADIATION
WHICH CAN BE DANGEROUS TO HUMAN HEALTH IF NOT PROPERLY SHIELDED AGAINST.
THE FIXTURE MUST NEVER BE USED IN SITUATIONS WHEN DIRECT LIGHT EMISSIONS FROM THE LAMP CAN
OCCUR. (Ex: No front glass, no intentional mirror, damaged front housing).
Lamp Installation & Replacement
1. Ensure the fixture is disconnected from the main power supply.
WARNING!! LAMP WILL STILL BE HOT TO THE TOUCH EVEN AFTER THE ALLOTED LAMP REST PERIOD.
THERMAL GLOVES ARE RECOMMENDED FOR WORKING WITH THE FIXTURE AND THE BULB.
2. Check to see that the new lamp is the correct wattage.
3. Release the lamp clamp level inside the front of the fixture.
4. To replace the lamp pull up and out to remove the old lamp.
Re-Lamp Procedures: Do not touch the bulb with your bare-hands. This can cause oil to accumulate on the glass and
reduce the performance of lamp life. The plastic/foam cover which protects the lamp should NOT be removed until after
the lamp is fitted into the fixture. If bulb becomes dirty due to hand contact or from any contaminant, it can be cleaned
with a cloth moistened with alcohol.
5. Re-tighten the lamp clamping device.
6. Close the lens door and securely latch.
Periodic Fixture Inspection
1. The condition of the internal wiring and ceramic base will need to be inspected and tested every 4000 working hours
or at least once a year. This frequency may need to be increased if the fixture has endured rough treatment. All internal
components should only be replaced with Lightstar spare parts.
2. The lamps should be checked every 100 working hours. The lamp should be changed if the lamp becomes deformed or
damaged, otherwise explosion might occur. Defer to instructions provided by the lamp manufacturer.
3. Always check the safety shield before every use.
4. All high-voltage components (ex: voltage wires, lamp ceramic, external shield, igniter must be inspected every 100
working hours or at least once a year.
5. Outer door hinges and latching system must be checked every 250 working hours to ensure proper seating of the safety
shield. This will allow inspections of accessories and the holding clamps.
6. The condition of the internal mirror must be maintained every 250 working hours. It must be replaced whenever it
becomes either cracked or broken. It is essential for the performance of the fixture.
Specifications & Photometrics
LSC-007 Specifications
Beam Angle 9° to 60°
Build Material Aluminum
Color Temperature 5600K
Cooling System Air Cooled
Fixture Size 27 x 34 x 41 in.
Fixture Weight 85 lbs
Focusing Knob Control
Head Type HMI Fresnel 12000W
IP Class IP23
Lamp Base 12000W / 160V / G38
Lens Size Fresnel 19.7"
Yoke Cast Aluminum with 1 1/8" Pin
LUX
METERS 20M 25M 30M
25500 16320 11330
LUX
METERS 20M 25M 30M
1575 1008 700
FC
FEET 65.6' 82' 98'
2369 1516 1052
FC
FEET 65.6' 82' 98'
146.3 93.6 65
Learn More
More dynamic information at official website: www.ikancorp.com
Support
CONDITIONS OF WARRANTY SERVICE
• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period is expired.
Free Service will not be Provided in the Following Situations:(*Even if the product is still within the warranty period.)
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
• Damage caused by natural disaster, abnormal voltage, and environmental factors, etc.
©2017 ikan Corporation. All rights reserved
Table des matières
Autres manuels Ikan Matériel de DJ
Ikan
Ikan Lighstar LSP-003 Manuel utilisateur
Ikan
Ikan OYB5 Manuel utilisateur
Ikan
Ikan LS-200E Manuel utilisateur
Ikan
Ikan Lightstar LSGP-003 Manuel utilisateur
Ikan
Ikan LSP-011 Manuel utilisateur
Ikan
Ikan MB4-4PT-KIT Manuel utilisateur
Ikan
Ikan WS-F350A Manuel utilisateur
Ikan
Ikan LS-1812E Manuel utilisateur
Ikan
Ikan LSGP-001 Manuel utilisateur
Ikan
Ikan LSP-200 Manuel utilisateur
Manuels Matériel de DJ populaires d'autres marques
thomann
thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur
Eagletone
Eagletone 6 Eyes Flower Manuel utilisateur
EuroLite
EuroLite FLD-1508 Manuel utilisateur
Technical Pro
Technical Pro LG8xSEA Manuel utilisateur
JB Systems
JB Systems Lounge Laser DMX Manuel utilisateur
Lightmaxx
Lightmaxx Vega Halo 90 Manuel utilisateur
Elation
Elation FUZE WASH Z350 Manuel utilisateur
Maverick
Maverick MK3 WASH Manuel utilisateur
Infinity
Infinity TF-260C7 Fresnel Manuel utilisateur
Chauvet
Chauvet EVE E-50Z Manuel utilisateur
Eliminator Lighting
Eliminator Lighting E 138 Manuel utilisateur
EuroLite
EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur