-3-www.igmtools.com
Operating instructions EN
EN 55014-1, EN 55014-2 podle s ustanoveními
směrnic 2006/42/EC, 2004/108/EC, 2006/95/EC,
2002/95/EC.
Signed: Ivo Mlej
Managing Director
2. WARRANTY SERVICE
The warranty is subject to Terms and Conditions and
Warranty Conditions of IGM nástroje a stroje s.r.o.,
the current version of which are available at www.
igmtools.com.
3. SAFETY INSTRUCTIONS
3.1 Notice
This machine is designed for work with wood and
wooden materials.
Proper use also includes compliance with the regular
operational and maintenance work described in this
manual.
The machine can be operated only by persons
familiar with the operation procedures, maintenance
and are aware of potential risks involved.
Comply with the minimum age limits specified by
law. The machine may only be used when in perfect
technical condition.
All safety and protective components must be
installed when operating the machine.
Besides these instructions, also adhere to the safety
instructions of your country and to the generally
recognized technical practices concerning the
operation of woodworking machinery.
The manufacturer or the supplier is not responsible
for any damage resulting from improper use.
Every user is responsible for their own actions.
The warranty cannot be claimed if any of the
following principles are broken:
- Unsuitable work environment: high humidity,
contamination.
- Damage caused by an improper assembly and/or
improper storage.
- Use of damaged machinery.
- Failure to follow the operating instructions:
transport, storage, assembly, putting into operation,
cleaning and maintenance of the machine.
- Use of unauthorized spare parts.
3.2 General safety instructions
The machine can pose danger when improperly
operated.
Completely read the operating instructions before
working with the machine and follow all the
instructions in this manual.
Keep this user manual clean and protect it from dirt
and moisture; in case of re-selling, pass the manual
onto the new owner.
Any alterations or changes to the machine are
prohibited.
Daily try out if the machine runs smoothly and check
the function of protective covers before operating the
machine. Replace any deficiencies and immediately
remove any damaged parts like covers.
The machine may only be used when in perfect
technical condition.
Use a hairnet or a hat to protect long hair. Wear tight-
fitting clothes, remove all bracelets, rings, necklaces or
ties. Wear work boots only, do not wear casual shoes
or sandals during work. Abide by the regulations for
personal protection.
Always wear safety eyewear. Always use hearing
protection. The tools are sharp and can cause severe
injury, use them with care.
Keep in mind the necessary space for operation when
installing and positioning the machine. The machine
must stand on a stable surface and must be adequately
lit.
Always use respiratory protection when working in a
dusty environment.
Make sure you have good lighting.
Make sure the power cord is not in your way when
working. Keep your work area clean. Never touch the
machine when it‘s running.
Make sure you are concentrating and paying attention.
Use caution. Never work under the influence of drugs
and/or alcohol.
Make sure there are no children around when working
with the machine.
