IGage IG3s Manuel utilisateur

iG3s

Static GNSS Receiver

User Manual

Revision R2017.05.20 (B9630)

‘iGage’, ‘iGage Mapping Corporation’ and ‘iG3s’ are

Trademarks of iGage Mapping Corporation of Salt Lake City

Utah, USA.

All product and brand names mentioned in this publication

are Trademarks of their respective holders.

FCC Notice iG3s receivers comply with the limits for a Class B

digital device, pursuant to the Part 15 of the FCC rules when

it is used in the Portable Mode.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

Table of Contents

Table of Contents...........................................................................3

Introduction ...................................................................................5

The Really-Quick-Start Guide ........................................................6

In the Field .................................................................................6

Office / Desktop.........................................................................6

What’s in the iG3s Box?.................................................................8

Technical Assistance ......................................................................9

Warranty ........................................................................................9

Safety Information.........................................................................9

Warnings and Cautions ...............................................................9

Use and Care..............................................................................10

Battery Safety and Disposal.......................................................10

Battery Warnings.......................................................................10

Batteries .......................................................................................11

Battery Charger............................................................................12

Optional Accessories....................................................................13

Front Panel Operation .................................................................13

Pushbuttons ...............................................................................13

On/Off Pushbutton..................................................................13

Record Pushbutton..................................................................14

LED Indicators ............................................................................14

Collecting Static Data...................................................................16

OPUS-Static, OPUS-RS and OPUS-Projects .............................16

Downloading, Processing and Archiving Data............................18

Installing the Download Tool ....................................................18

Downloading Data from iG3s Reciever.....................................18

Starting the iGx Download Tool ................................................19

Using the Download Tool ............................................................20

Submitting an Occupation to OPUS..........................................21

Setting the Receiver Type..........................................................24

Viewing the Observation Log ....................................................24

Trimming Occupation Files........................................................25

Performing Quality Control Checks ..........................................26

The MSS Factory Support Button..............................................26

The Send to Factory Support Button........................................26

Advanced Download Settings......................................................27

Configuring the Download Tool ..............................................27

'Base Project Folder' ................................................................28

'Archive All Projects' ................................................................29

'GPS Mounts on Drive'.............................................................29

‘Minimum File Size to Transfer’ ..............................................30

‘Show UTC Time’......................................................................30

'Default HI' ...............................................................................31

'Default Agency'.......................................................................31

'Default Operator'....................................................................32

'Decimate OPUS Submission to ...'..........................................32

'Your Email'...............................................................................32

'Show Advanced Settings'........................................................33

‘PPP Service’.............................................................................33

Export 8.3 Filenames ...............................................................34

Format Extended .....................................................................34

Use Direct OA Submission .......................................................35

Utilities........................................................................................35

“1. Undelete Occupations” .....................................................35

“2. HcRINEX Convertor” ..........................................................36

“3. Mark One File Unread”......................................................36

“4. Mark All GPS Files Unread” ...............................................36

GPS Settings..................................................................................36

The ‘Log’ Tab ..............................................................................37

GPS 'Settings' Tab.......................................................................37

Recording Interval....................................................................39

Auto Sessioning........................................................................40

Elevation Mask.........................................................................40

Update Firmware.....................................................................40

OPUS: What is it? .........................................................................44

OPUS-RS (Rapid Static) ..............................................................45

OPUS-Projects ............................................................................46

OPUS Error Messages and Failures .............................................46

Interpreting OPUS Results ...........................................................47

Getting ready to use OPUS..........................................................49

Using OPUS-Projects ....................................................................51

Troubleshooting the iG3s Receiver .............................................52

1. Receiver won’t turn on:.......................................................52

2. Is the receiver tracking satellites? ......................................53

3. Is the receiver storing observation data?...........................53

4. The RED Power LED is flashing!...........................................53

5. The GPS receiver won’t mount as a Disk Drive..................53

6. Yellow and Green LED’s Flash Once Each Second..............54

iG3s 10-Pin Connector .................................................................56

iG3s PC Data Cable.......................................................................57

iG3s Antenna Model ....................................................................58

‘Slant Height’ to ‘Vertical Height’:...............................................60

Manually Converting Heights..................................................60

Examples ..................................................................................60

Warranty.......................................................................................61

Exclusions .................................................................................61

RMA ..........................................................................................62

Introduction

Thank you very much for choosing to purchase and use an

iG3s static GNSS receiver!

The iG3s features outstanding performance and is easy-to-

use with automated downloads and submissions, we know

that your new static receiver will be a valuable tool that

quickly pays for itself.

This guide is designed to help you familiarize yourself with

your new equipment and to offer basic information on the

operation of NGS OPUS.

If you have questions or suggestions, don’t hesitate to

iGage Mapping Corporation

1545 South 1100 East Suite 1

Salt Lake City UT 84105 USA

+1-801-412-0011

email: support@igage.com

Your input is extremely valuable to us and we will listen to

your suggestions!

Software updates and news are available from:

www.ig3s.com

The Really-Quick-Start Guide

In the Field

1. Put a charged battery in the receiver.

2. Mount the receiver over the point you want to

survey. Level and measure the Instrument Height

(HI.) For best results: align the button panel so it

faces north, double-check your bubble and the

instrument height (HI.)

Record the HI, start time and point description in

your field notes.

Point Description HI Start Time End

1001 NW C Sec 14 2.0M V 9:45 am 1 March 2013 12:18 pm

3. Push the ON/OFF button and hold it for 1-second

until the lights flash. After 30 seconds the blue LED

will flash once for every tracked Satellite.

4. Verify that the yellow ‘Files’ LED flashes once

every 5-seconds as the receiver logs data.

5. Let the receiver record data for at least:

OPUS-Rapid Static: 16-minutes

OPUS-Static: 121-minutes

6. Turn the receiver off by pushing and holding the

ON/OFF button for 1-second.

Office / Desktop

7. Install the download tool from the included DVD

or get the latest version from www.ig3s.com.

8. Put a freshly charged battery in the receiver, turn

on the receiver, wait 10-seconds for the power

LED to flash and then plug your iG3s into a USB

connector on your computer.

9. When/if you see the Windows AutoPlay screen:

click on the red ‘X’ button on the upper-right

corner.

10. Start the iGx Download tool from your desktop,

push the ‘Download from GPS’ button:

11. Highlight the occupation, set the Point ID, the

Description and the HI; push the ‘Submit to OPUS’

button.

12. When prompted press OK, then Control-V (to

paste the file location and name,) then press the

“Enter” key on your keyboard, or click on ‘Open’

to set the ZIP filename.

13. Finally press the ‘Upload to Rapid Static’ or

‘Upload to Static’ button as prompted at the

bottom of the screen.

What’s in the iG3s Box?

Other than a suitable tripod or pole, iG3s receivers are sold

as complete kits, ready to record OPUS compatible static

raw data sets.

Each receiver kit includes these items:

A Hard Shell Carry Case

This User Manual

iG3s GNSS Head

The iG Download DVD:

GPS to PC Data Cable:

Serial, USB and Ext. Power

A high capacity 7.4 V Lithium-Ion

Battery

Quad Battery Charger

Power Adapter with Cord:

A SECO 91641 Stedi-Rest:

External Battery Power Clips

Technical Assistance

If you have questions or issues with your receiver, support is

provided both by your dealer and iGage Mapping

Corporation in Salt Lake City Utah:

iGage Mapping Corporation

1545 South 1100 East STE 1

Salt Lake City UTAH 84105

+1-801-412-0011

For support questions by email: support@igage.com

Warranty

Please see the full warranty at the end

of this manual for details.

The iG3s GNSS receiver has a 2-year warranty.

Cables and chargers are warranted for 1-year.

Batteries are warranted for 90-days.

Advanced replacement programs are available for mission

critical applications.

Service is provided by iGage Mapping Corporation in Salt

Lake City Utah.

Safety Information

This manual describes the iG3s GNSS Receivers. Before you

use your receiver, please make sure that you read and

understand these warnings and safety requirements.

Warnings and Cautions

An absence of specific alerts does not mean that there are

no safety risks involved. Warning and Caution information is

intended to minimize the risk of personal injury and/or

damage to the equipment.

Use and Care

The iG3s receiver is a field ready instrument; however it is

also a delicate electronic instrument. Take suitable care to

avoid damage to the instrument.

Avoid dropping the receiver as it can change the phase

center of the antenna.

Avoid storing the receiver at excessive temperatures (hot or

cold) as it will damage the internal batteries.

Avoid storing the batteries at temperatures less than -40° F

(-40° C) and temperatures higher than 160°F (70°C) as it will

permanently reduce the battery capacity and life

DO NOT leave the iG3s or accessories inside a vehicle in the

summer. Temperatures higher than 160°F will permanently

reduce battery capacity and battery life.

GNSS receivers and especially Lithium-Ion batteries are like

puppies: in the summer if you leave them in your vehicle with

the windows rolled up, you will kill them.

Battery Safety and Disposal

The batteries are lithium-ion type cells.

Battery Warnings

WARNING - Do not damage the rechargeable Lithium-ion

battery. A damaged battery can cause an explosion or fire,

and can result in personal injury and property damage.

To prevent injury or damage:

Table des matières

Autres manuels iGage Récepteur

iGage

iGage iG4 Manuel utilisateur

iGage

iGage iG8 Manuel utilisateur

iGage

iGage iG5 Manuel utilisateur

iGage

iGage iG9 Manuel utilisateur

iGage

iGage C12 Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur

iGage iG3s Manuel utilisateur

Manuels Récepteur populaires d'autres marques