IFM OID20 Series Manuel utilisateur

Operating instructions

Optical distance sensor

OID20x

UKUK

11474459 / 00 04 / 2019

Contents

1 Preliminary note��3

1�1 Symbols used ��3

2 Safety instructions ��3

3 Functions and features ��4

3�1 Applications ��4

4 Installation��5

4�1 Installation conditions ��5

5 Electrical connection��5

6 Operating and display elements ��6

7 Settings / operation��6

7�1 Switch off the laser ��6

8 IO-Link ��7

8�1 General information ��7

8�2 Device-specific information��7

8�3 Parameter setting tools��7

9 Maintenance, repair, disposal��7

1 Preliminary note

1.1 Symbols used

►Instructions

> Reaction, result

[…] Designation of keys, buttons or indications

→Cross-reference

Important note

Non-compliance may result in malfunction or interference�

Information

Supplementary note

2 Safety instructions

• Read this document prior to set-up of the unit� Ensure that the product is

suitable for your application without any restrictions�

• Improper or non-intended use may lead to malfunctions of the unit or to

unwanted effects in your application� That is why installation, electrical

connection, set-up, operation and maintenance of the unit must be carried out

by qualified personnel authorised by the machine operator�

• In case of malfunction of the unit please contact the manufacturer� If the unit is

tampered with and/or modified, any liability and warranty is excluded�

• The unit complies with the standard EN 61000-6-4� The unit may cause radio

interference in domestic areas� If interference occurs, the user must take

appropriate remedial actions�

WARNING

Visible laser light; laser protection class 2�

Use of controls or adjustments other than those specified herein may result in hazardous

radiation exposure� Damage to the retina is possible�

►Do not stare into the laser beam!

►Apply the enclosed labels (laser warning) in the immediate vicinity of the unit�

►Adhere to the caution and warning notes on the product label�

►Use the enclosed label for the power supply cable�

►EN/IEC 60825-1 : 2007 and EN/IEC 60825-1 : 2014 complies with 21 CFR 1040

except for deviations pursuant to Laser Notice No� 50, dated June 2007

Label for supply cable

D-45128 Essen

Product label

3 Functions and features

The unit is used as an optical distance sensor�

3.1 Applications

• The optical distance sensor measures distances between 0�03 and 2 m�

• It has a background suppression of up to 20 m�

• The switching outputs are complementary�

The distance between the sensor and the background must be limited

to max� 20 m by the customer� Otherwise measured values can be

ambiguous → 4.1 Installation conditions.

4 Installation

4.1 Installation conditions

►Install the unit so that the object to be detected is within a measuring range of

0�03��2 m�

Any object between the set switch point and a distance of 20 m from the sensor is

suppressed�

Reflecting surfaces in the direct beam path of the sensor – also in

the range > 20 m – are to be avoided by the customer� Otherwise the

measured values can be ambiguous�

5 Electrical connection

The unit must be connected by a qualified electrician�

►The national and international regulations for the installation of electrical

equipment must be adhered to�

►Ensure voltage supply to EN 50178, SELV, PELV�

►Disconnect power�

►Connect the unit as follows:

DC PNP

2 1

L+

5: IN = Laser on / off

4: OUT1 = normally open / IO-Link

2: OUT2 = normally closed

Core colours of ifm sockets:

1 = BN (brown), 2 = WH (white), 3 = BU (blue), 4 = BK (black), 5 = GR (grey)

6 Operating and display elements

1: LED yellow: Set value reached, output OUT1 = High (if OUT1 is congured as NO)

7 Settings / operation

The unit is set via the IO-Link interface. (→ 8 IO-Link)

On delivery the unit can also be used without IO-Link� Preset switch point: 2 m

►After installation, electrical connection and programming, check whether the

unit operates correctly�

Lifetime of a laser diode: 50,000 hours

7.1 Switch off the laser

For safety and maintenance purposes the laser of the unit can be temporarily

switched off via the input on pin 5�

Input signal at pin 5 Laser

Low / not connected On

High Off

8 IO-Link

8.1 General information

This unit has an IO-Link communication interface which requires an IO-Link-

capable module (IO-Link master) for operation�

The IO-Link interface enables direct access to the sensor values and parameters

and provides the possibility to set the parameters of the unit during operation�

In addition communication is possible via a point-to-point connection with a USB

adapter cable�

You will find more detailed information about IO-Link at www�ifm�com�

8.2 Device-specific information

You will find the IODDs necessary for the configuration of the IO-Link device and

detailed information about sensor values, diagnostic information and parameters

in the overview table at www�ifm�com�

8.3 Parameter setting tools

You will find all necessary information about the required IO-Link hardware and

software at www�ifm�com�

9 Maintenance, repair, disposal

Faulty sensors must only be repaired by the manufacturer�

►Keep the front lens of the sensor clean�

►After use dispose of the unit in an environmentally friendly way in accordance

with the applicable national regulations�

►Do not open the module housing� There are no user-serviceable components

inside�

Technical data and further information at www�ifm�com

Table des matières

Autres manuels IFM Accessoires

IFM

IFM SB1 Series Manuel utilisateur

IFM

IFM OGH Manuel utilisateur

IFM

IFM PQ3 Series Manuel utilisateur

IFM

IFM TS502A Manuel utilisateur

IFM

IFM efector200 OM Manuel utilisateur

IFM

IFM Efector 200 OG Manuel utilisateur

IFM

IFM Efector 200 O4P5 Series Manuel utilisateur

IFM

IFM LI513 Series Manuel utilisateur

IFM

IFM SBG2 Series Manuel utilisateur

IFM

IFM LR7009 Manuel utilisateur

IFM

IFM efector 200 OGP2 Series Manuel utilisateur

IFM

IFM O6P7 Series Manuel utilisateur

IFM

IFM OJ51 Series Manuel utilisateur

IFM

IFM KI0063 Manuel utilisateur

IFM

IFM OY4**S Series Manuel utilisateur

IFM

IFM PN01 A Series Manuel utilisateur

IFM

IFM O5D15 Series Manuel utilisateur

IFM

IFM PN3 Series Manuel utilisateur

IFM

IFM Efector500 PY7102 Manuel utilisateur

IFM

IFM PL205 Series Manuel utilisateur

IFM

IFM LDH100 Manuel utilisateur

IFM

IFM efector 160 LR3000 Manuel utilisateur

IFM

IFM JN2301 Guide d'application

IFM

IFM SBY2 Series Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur