IFM Electronic efector300 SBU3 Manuel utilisateur
Operating instructions
Mechatronic flow sensor
SBU3
706020/00 03/2011
UK
2
1 Safety instructions
• Please read the product description prior to set-up of the unit. Ensure that the
product is suitable for your application without any restrictions.
• Improper or non-intended use may lead to malfunctions of the unit or to unwan-
ted effects in your application. That is why installation, electrical connection,
set-up, operation and maintenance of the unit must be carried out by qualified
personnel authorised by the plant operator.
• Check the compatibility of the product materials (see technical data) with the
media to be monitored in all applications.
• The device shall be supplied from an isolating transformer having a secondary
Listed fuse rated either
a) max 5 amps for voltages 0~20 V (0~28.3 Vpeak), or
b) 100/Vp for voltages of 20~30 V (28.3~42.4 Vpeak).
• Flow Operated Switches shall be connected only by using any R/C (CYJV2)
cord, having suitable ratings.
Contents
1 Safety instructions ...............................................................................................2
2 Functions and features ........................................................................................3
3 Installation............................................................................................................3
4 Electrical connection............................................................................................4
5 Switch point setting..............................................................................................4
5.1 Definition of requested value .........................................................................5
5.2 Adjustment to existing flow ............................................................................5
6 Operation.............................................................................................................6
7 Maintenance, repair and disposal........................................................................6
8 Scale drawing ......................................................................................................7
9 Technical data .....................................................................................................8
3
UK
2 Functions and features
The unit monitors liquid media.
It detects the volumetric flow quantity to the principle of differential pressure and
switches the output:
• Outputclosed(LED=ON),ifvolumetricflowquantity≥switchpoint.
• Output open (LED = OFF), if volumetric flow quantity < switch point.
The switch point is adjustable.
3 Installation
►Ensure that the system is free of pressure during installation.
►Ensure that no media can leak at the mounting location during installa-
tion.
The unit provides 5 connections for pipe thread G½.
• 1: Connection for additional sensor
• IN = inlet
• OUT1 to OUT3: 3 x outlet for 3 different connection types
IN OUT1
G2
1
OUT2
G2
1
G2
1
G2
1
OUT3
G2
1
The cover plugs are only loosely screwed to the connections.
►Firmly tighten the cover plugs for unused connections. Tightening
torque: 70 Nm.
4
4 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electrical
equipment must be adhered to.
Voltage supply to EN 50178, SELV, PELV.
►Disconnect power.
►Connect the unit as follows:
3
1
4
2
L+
L-
1
3
4
For information about available sockets/connectors see:
www.ifm.com →Products→Accessories
5 Switch point setting
There are 2 possibilities:
• Definition of requested value →5.1.
• Adjustmenttoexistingflow→5.2.
1
5
L/min
D
C
B
A
1
5
L/min
1 2
A: LED; B: setting scale; C: lock nut; D: knurl
Do not turn the setting screw beyond the maximum value of the setting
range(→Technicaldata)toavoidfaultyswitching.
5
UK
5.1 Definition of requested value
►Loosen the lock nut.
►Turn the knurl until the requested value just becomes visible on the setting
scale.→Exampleinfigure2:requestedvalue=10l/min.
►Tighten the lock nut.
5.2 Adjustment to existing flow
►Let the normal flow circulate in the installation.
►Loosen the lock nut.
►Set the switch point with the knurl.
- If the LED lights before setting: turn the knurl in the direction [+] until the LED
goes out. Then turn in the opposite direction [-] until the LED lights.
- If the LED does not light before setting: turn the knurl in the direction [-] until
the LED lights.
►Tighten the lock nut.
Correlation between number of the turns of the knurl (SET) and switch point in l/
min (typical course of the measurement curves):
SET
SBU325
SBU324
SBU323
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0
10
20
30
40
50
Q [l/min]
60
70
80
90
100
The diagram shows the typical course of the measurement curves for coolants at 20 °C.
6
6 Operation
After power on the unit is ready for operation. It detects the volumetric flow quanti-
ty and switches the output according to the setting.
Function diagram
t
Q
1
0
A
B
C
A = requested flow; B = switch point; C = switching output
7 Maintenance, repair and disposal
In case of correct use no maintenance and repair measures are necessary.
In case of strongly polluted media: mount a filter in front of the inlet (IN). Recom-
mendation: use a 50-micron filter.
Only the manufacturer is allowed to repair the unit.
After use dispose of the unit in an environmentally friendly way in accordance with
the applicable national regulations.
7
UK
8 Scale drawing
30
G
2
1
G
2
1
80
62
24
150...167
40
G
2
1
80
68
6
40
6,3
26
8
9 Technical data
Setting range
- SBU323 [l/min] ....................................................................................................... 0.3...25
- SBU324 [l/min] ....................................................................................................... 0.3...50
- SBU325 [l/min] ....................................................................................................... 0.3...75
Operating voltage [V]....................................................................... 24 DC (-15 % / +10 %)
Current rating [mA] ......................................................................................................... 100
Protected against short circuits, reverse polarity and overload
Voltage drop [V].............................................................................................................< 2.5
Current consumption [mA]..............................................................................................< 15
Hysteresis
- SBU323 [l/min] ...................................................................................................... 0.1...1.0
- SBU324 [l/min] ...................................................................................................... 0.1...1.5
- SBU325 [l/min] ...................................................................................................... 0.2...2.0
Repeatability [% of value of measuring range]....................................................................1
Accuracy [% of value of measuring range].......................................................................± 5
Response time [s]........................................................................................................< 0.01
Materials (wetted parts).......................... stainless steel 316 / 1.4401; aluminium anodised;
PEEK; O-ring: FPM (Viton)
Housing materials....................................................................... aluminium anodised; steel
Protection ............................................................................................................... IP 67 III
Switching cycles min. ........................................................................................... 10 million
Medium temperature [°C] ........................................................................................... 0...60
Operating temperature [°C] ........................................................................................ 0...60
Pressure resistance [bar]................................................................................................ 200
Temperature changes affect the specified standard settings for coolants.
For oils, the settings are influenced by temperature and viscosity.
More information at www.ifm.com
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels IFM Electronic Accessoires
IFM Electronic
IFM Electronic O5D10 series Manuel utilisateur
IFM Electronic
IFM Electronic Efector 200 Manuel utilisateur
IFM Electronic
IFM Electronic efector 200 OG laser Manuel utilisateur
IFM Electronic
IFM Electronic Efector 300 Manuel utilisateur
IFM Electronic
IFM Electronic efector150 Manuel utilisateur
IFM Electronic
IFM Electronic Efectorsod PE70 Series Manuel utilisateur
IFM Electronic
IFM Electronic efector300 SU9004 Manuel utilisateur
IFM Electronic
IFM Electronic efector100 GG507S Manuel utilisateur
IFM Electronic
IFM Electronic Efector 200 OL Series Manuel utilisateur
IFM Electronic
IFM Electronic Efector 300 Manuel utilisateur
IFM Electronic
IFM Electronic efector100 GG507S Manuel utilisateur
IFM Electronic
IFM Electronic efector200 OC Manuel utilisateur
IFM Electronic
IFM Electronic Efectror 200 OGE2 Series Manuel utilisateur
IFM Electronic
IFM Electronic efector 300 SU8200 Manuel utilisateur
IFM Electronic
IFM Electronic efector 160 Manuel utilisateur
IFM Electronic
IFM Electronic Efector 300 SM7050 Manuel utilisateur
IFM Electronic
IFM Electronic efector250 E2M250 Manuel utilisateur
IFM Electronic
IFM Electronic Efector 300 Manuel utilisateur
IFM Electronic
IFM Electronic efectro 500 Manuel utilisateur
IFM Electronic
IFM Electronic Efector 250 Series Guide de référence
Manuels Accessoires populaires d'autres marques
Panasonic
Panasonic HG-T Series Manuel utilisateur
DigiDesign
DigiDesign 888/24 I/O Manuel utilisateur
PROZIS
PROZIS QUAY Manuel utilisateur
patagonia
patagonia PSI Vest Manuel utilisateur
SFC Energy
SFC Energy EFOY GO! Manuel utilisateur
Axminster
Axminster Tooling Stylus Tip Ballpoint Pen Kit Manuel utilisateur