IFM Electronic Efector150 Manuel utilisateur

Operating instructions

Capacitive sensors

704032/01 12/2007

Contents

1 Safety instructions ........................................................................ 3

2 Functions and features................................................................. 4

3 Installation .................................................................................... 4

3.1 Notes on flush and non-flush installation................................... 4

4 Electrical connection..................................................................... 5

4.1 Wiring ........................................................................................ 5

5 Operating and display elements................................................... 5

6 Operating modes.......................................................................... 6

6.1 Adjustment................................................................................. 6

7 Operation...................................................................................... 6

8 Maintenance, repair and disposal................................................. 6

9 Terms............................................................................................ 7

Preliminary note

Operating elements are indicated as follows:

Example: [OUT OFF] = pushbutton "OUT OFF"

An instruction is indicated by "►":

Example: ►Check whether the unit operates correctly.

A reaction to the action is indicated by ">":

Example: > yellow LED lights.

1 Safety instructions

Please read the product description prior to set-up of the unit. Ensure that the

product is suitable for your application without any restrictions.

The unit conforms to the relevant regulations and EC directives.

Improper or non-intended use may lead to malfunctions of the unit or to

unwanted effects in your application.

That is why installation, electrical connection, set-up, operation and

maintenance of the unit must only be carried out by qualified personnel

authorised by the machine operator.

•

2 Functions and features

The capacitive sensor detects without contact metals, almost all plastics,

glass, ceramics, wood and paper and indicates their presence by providing a

switched signal.

Not suited for level detection.

3 Installation

3.1 Notes on flush and non-flush installation

Install the unit using the supplied nuts.

ﬂush

non ﬂush

Adhere to the minimum distances when mounting several sensors of the same

type

•

►

3xs

1xs

3xd3xd d

3xs

3x SnD3xDD

4 Electrical connection

The unit must be connected by a qualified electrician.

The national and international regulations for the installation of electrical

equipment must be adhered to.

Voltage supply to EN50178, SELV, PELV

Disconnect power.

Connect the unit.

4.1 Wiring

L+

positive switching (type...PKG...)

L+

negative switching (type ...NKG...)

5 Operating and display elements

LED

potentiometer

►

6 Operating modes

6.1 Adjustment

NO NC

place the target material in the safe

sensing range

LED is lit

►

place the target material in the safe

sensing range

LED goes out

►

decrease the sensing range

LED goes out

►

decrease the sensing range

LED is lit

►

increase the sensing range

LED is lit

►

increase the sensing range

LED goes out

►

Do not increase the sensing range beyond Sn.

7 Operation

Check whether the unit operates correctly. Bring about a sensor response by

taking suitable measures.

Display by LEDs:

LED yellow OFF: switching output disabled

LED yellow ON: switching output enabled

Do not operate units with high field intensity (e.g. walkie-talkies) at close range to

the sensor.

8 Maintenance, repair and disposal

The operation of the unit is maintenance-free. To ensure a correct function:

Keep the sensing face and a clear space, if any, free from deposits and foreign

bodies.

When removing the unit or changing the medium, a new adjustment might be

necessary.

It is not possible to repair the unit.

After use dispose of the unit in an environmentally friendly way in accordance with

the applicable national regulations.

•

9 Terms

Active zone / active face

Area above the sensing face in which the sensor reacts to the approach of the

target.

Output function

Normally open: Object within the active zone - output switched.

Normally closed: Object within the active zone - output blocked.

Programmable: Choice between normally closed or normally open.

Positive switching: Positive output signal (to L-).

Negative switching: Negative output signal (to L+).

Power-on delay time

The time the sensor needs to be ready for operation after application of the

operating voltage (in the millisecond range).

Hysteresis

The difference between the switch-on and the switch-off point.

Leakage current

Current for the internal supply of 2-wire units, also flows through the load when the

output is unswitched.

Current consumption

Current for the internal supply of 3-wire DC units.

Switch point drift

The shifting of the switch point owing to changes of the operating conditions (e.g.

temperature, pressure, air humidity).

Short-circuit protection

ifm sensors which are protected against excessive current by means of a pulsed

short-circuit protection. The inrush current of incandescent lamps, electronic relays

and low resistance loads may cause this protection to cut in and turn the sensor

off!

Operating voltage

The voltage range in which the sensor functions safely. A stabilised and smoothed

direct voltage should be used! Take into account residual ripple!

Technical data and further information at

www.ifm.com →Select your country →Data sheet direct:

Autres manuels pour efector150

Table des matières

Autres manuels IFM Electronic Accessoires

IFM Electronic

IFM Electronic efector 500 PI00 A Series Manuel utilisateur

IFM Electronic

IFM Electronic PY995 Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 500 PN3 Manuel utilisateur

IFM Electronic

IFM Electronic efector100 GG507S Manuel utilisateur

IFM Electronic

IFM Electronic efector300 SI1004 Manuel utilisateur

IFM Electronic

IFM Electronic efector180 IX50 Manuel utilisateur

IFM Electronic

IFM Electronic VNB001 Manuel utilisateur

IFM Electronic

IFM Electronic Efector 200 OM Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector160 LK3 Manuel utilisateur

IFM Electronic

IFM Electronic Efector 200 Manuel utilisateur

IFM Electronic

IFM Electronic Efector 200 OI Series Manuel utilisateur

IFM Electronic

IFM Electronic LR2750 Manuel utilisateur

IFM Electronic

IFM Electronic LK7 Manuel utilisateur

IFM Electronic

IFM Electronic Efector 200 Manuel utilisateur

IFM Electronic

IFM Electronic OPD100 Manuel utilisateur

IFM Electronic

IFM Electronic efector150 Manuel utilisateur

IFM Electronic

IFM Electronic ecomat100 CR2101 Guide d'application

IFM Electronic

IFM Electronic SM6000 Manuel utilisateur

IFM Electronic

IFM Electronic efector 200 O5 Manuel utilisateur

IFM Electronic

IFM Electronic PN50 Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 200 O6T3 Series Manuel utilisateur

IFM Electronic

IFM Electronic TS502A Manuel utilisateur

IFM Electronic

IFM Electronic efector200 OGP3 Series Manuel utilisateur

IFM Electronic

IFM Electronic efector 160 Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Manuel utilisateur