Idview Digital IV-8MP180DE Manuel utilisateur
Quick Start Guide
IV-8MP180DE 180°Panoramic Mini Dome Network Camera
Loosen the setscrew and take the bracket off.
Note:
There are two setscrews on the camera that fasten the bracket. Loose either one or both setscrews
until the bracket can be taken off. Only one of the setscrews needs to be screwed while fixing.
Fix the bracket on the position where the camera is intended to be installed. Wall Mount (IV-
WM-A71) is available for installation.
Step1: Buckle the lanyard on the camera body tightly to the reserved hook on the bracket. After
connecting the cables to respective connectors, twine the cables around tidily in the room
on the bottom;
Quick Start Guide
Step2: Rotate the camera to bracket and tighten the setscrew;
Step3: Loosen clamp screw and adjust shooting direction, tighten clamp screw.
Table des matières
Autres manuels Idview Digital Caméra de sécurité
Idview Digital
Idview Digital IV-DV720LT Manuel utilisateur
Idview Digital
Idview Digital IV-BU281213MP Manuel utilisateur
Idview Digital
Idview Digital IV-BU28122MP Manuel utilisateur
Idview Digital
Idview Digital IV-8MP180BU Manuel utilisateur
Idview Digital
Idview Digital IV-DVFH6100IR-700B Manuel utilisateur
