IDENTEC SOLUTIONS IDS1000 Instructions d'utilisation
IDE NTEC SOLUTIONS
Model IDS1000
iQ355 P
Personnel Tag
HARDWARE USER MANUAL
Proprietary Notice
This document contains confidential information proprietary to IDENTEC SOLUTIONS and may not be used or
disclosed to other parties in whole or in part without the prior written authorization from IDENTEC SOLUTIONS.
Disclaimer and Limitation of Liability
IDENTEC SOLUTIONS AG and its affiliates, subsidiaries, officers, directors, employees and agents do not make
any express or implied warranties or representations with respect to such information including, without limitation,
warranties as to non-infringement, reliability, suitability for a particular purpose and accuracy. IDENTEC
SOLUTIONS shall not under any circumstances be liable to any person for any special, incidental, indirect or
consequential damages, including without limitation, damages resulting from use of or reliance on information
presented herein, or loss of profits or revenues or costs of replacement goods, even if informed in advance of the
possibility of such damages.
Trademarks
“IDENTEC SOLUTIONS”, “Intelligent Long Range”, “ILR” and the stylized “i” are registered trademarks.
“i-PORT”. “iPOINT” and “Visibility Delivered.” are trademarks of IDENTEC SOLUTIONS, Inc. and/or IDENTEC
SOLUTIONS AG.
Copyright Notice
Copyright © 2020 IDENTEC SOLUTIONS. All rights reserved.
No part of this document may be reproduced or transmitted in any form by any means, photographic, electronic,
mechanical or otherwise, or used in any information storage and retrieval system, without the prior written
permission of IDENTEC SOLUTIONS.
Issue 1.0 / March 2020 (MOM)
Subject to alteration without prior notice.
Copyright © 2020 IDENTEC SOLUTIONS AG
Printed in Austria
Radio Frequency Compliance Statement
IDENTEC SOLUTIONS is the responsible party for the compliance of the following devices:
MODEL: iQ355 P
Region/Country Organization Marking
EUROPE: EU CE
USA: FCC FCC ID OO4-IDS1000
CANADA: IC 3538A-IDS1000
The user(s) of these products are cautioned to only use accessories and peripherals approved, in advance, by
IDENTEC SOLUTIONS. The use of accessories and peripherals, other than those approved by IDENTEC
SOLUTIONS, or unauthorized changes to approved products, may void the compliance of these products and result in
the loss of the user(s) authority to operate the equipment.
European Declaration of Conformity according to RED Directive
IDENTEC SOLUTIONS AG hereby declares that the device iQ355 P is in conformity with the essential
requirements of Directive 2014/53/EU. The declaration of conformity can be found at: www.identecsolutions.com
USA Certification
FCC Part 15 compliance statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Canada Certification
Licence-Exempt Radio Apparatus (ISED)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the
device.
Appareils radio exempts de licence (ISDE)
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Radio Frequency (RF) Exposure Compliance of Radiocommunication
portable apparatus
This device complies with FCC and ISED Canada RF radiation exposure limits set forth for general population
(uncontrolled exposure). This device must not be collocated or operating in conjunction with any other antenna or
transmitter.
Conformité à l’exposition aux champs RF des équipements radio portables
Cet appareil est conforme aux limites FCC et ISDE Canada concernant l'exposition aux rayonnements RF établies
pour le grand public. (Environnement non-contrôlé)
Cet émetteur ne doit pas être co-situé ou fonctionner conjointement avec une autre antenne ou un autre émetteur.
WARNING - This product should be installed by personnel trained in installation of
equipment in industrial environments and meet the representative country’s
National Electrical Code.
Electrostatic Discharge
This product contains components that are sensitive to electrostatic discharges. Please observe
the special instructions for their protection. Incorrect handling can damage the unit and cause
the invalidation of the warranty.
Minimum safety precautions against electrostatic discharge:
Establish earth contact before you touch the unit. (For example, touch the earthing screw on the unit.) Best
practice is to use an antistatic ribbon and earth yourself permanently for the time you handle the unit.
Avoid unnecessary contact with the unit connectors and assemblies inside the unit.
Do not open the unit.
Use antistatic tools for the setting of the unit. (Warning: Do not touch life-threatening voltages with these tools).
Do not store unit and components without protective packaging.
Remove unit and components from the packaging only prior to installation.
These notes are not sufficient to guarantee complete protection from electrostatic discharges! We
recommend the use of suitable protective equipment.
IDENTEC SOLUTIONS does not accept the return of products where the regulations concerning the ESD
precautions and protective packaging materials were not followed.
Safety Instructions
The equipment can be installed in restricted areas.
The system described in this manual is for exclusive operation of trained employees. Only qualified personnel that
have knowledge of the potential dangers involved should perform the installation, settings, maintenance and repair
of the units used.
Operational Safety
The correct and safe use of these systems assumes that operating and service personnel follow the safety
measures described in the manual alongside the generally acceptable safety procedures.
If there is a possibility that safe operations cannot be guaranteed, the system must be switched off, secured against
accidental use and the service unit responsible immediately informed.
Safety Documents
The iQ355 P was designed, tested and supplied in perfect condition, according to document IEC/EN 60950-1
Safety Requirements.
Condensate / Change of Temperature
To avoid condensation in the system, the unit must be allowed to slowly adjust itself to warmer temperatures after
removal from cold and cool environments.
Do not open the housing
There is no need to open the housing. The unit does not have any internal setting elements or displays.
Spare Parts
We recommend that only personnel, original products, spare and replacement parts authorized by IDENTEC
SOLUTIONS be used for installation, service and repair. IDENTEC SOLUTIONS does not accept any responsibility
for materials used, work carried out or possible consequences from unauthorized third party vendors.
Contents
1. Preface .................................................................................................................................................................... 7
2. Introduction .............................................................................................................................................................. 8
2.1 iQ355 P Tag and System Description .............................................................................................................. 8
2.1.1 UHF Interface ...................................................................................................................................... 9
2.1.2 LF Interface ......................................................................................................................................... 9
2.1.3 NFC Interface .................................................................................................................................... 10
2.2 System Components – Readers .................................................................................................................... 11
2.3 Tag Functions ................................................................................................................................................ 12
2.3.1 Pushbutton ........................................................................................................................................ 12
2.3.2 LED Indicators ................................................................................................................................... 12
2.3.3 Configuration ..................................................................................................................................... 12
3. Mechanical Information & Installation .................................................................................................................... 13
3.1 Mounting Options ........................................................................................................................................... 13
4. Troubleshooting ..................................................................................................................................................... 14
5. Maintenance .......................................................................................................................................................... 14
5.1 Firmware Update ........................................................................................................................................... 14
5.2 Spare Parts .................................................................................................................................................... 14
5.3 Returns ........................................................................................................................................................... 15
6. Technical Specifications ........................................................................................................................................ 16
1. Preface
This installation manual must be read carefully prior to starting the installation. The described installation works
assuming that installation materials like cables, antennas and any mechanical parts are available.
This document is the hardware description of the iQ355 P. This document is intended only for mechanical and
electrical installation of these units.
IDENTEC SOLUTIONS reserves the right to make changes and updates to the content contained herein. It is the
user’s responsibility to contact the service department for any possible changes or updates to operating and
maintenance procedures.
Updates will be provided upon request. The information in this document may be subjected to changes without
prior notice.
Check whether delivery is complete and for any damages. If the delivery is not complete or damaged
immediately inform the carrier. The dispatch and service organization of IDENTEC SOLUTIONS should also
be informed to facilitate the repair or exchange of the system.
Product Contents (deliverables):
iQ355 P Device
ID Card holder (optional)
Safe-Strap Basic Black 3mm ATEX w/o knob (optional)
Hardware User Manual
Associated Documents
SDK Online Help
i-SHARE Manual
Specific tag and reader manuals
2. Introduction
2.1 iQ355 P Tag and System Description
The iQ355 P tag is a Personnel tag, designed for use with all personnel safety, real-time location and access
control applications. The robust tag is especially suited to harsh environments, in industries such as Oil & Gas or
mining.
iQ355 P Tag iQ355 P Tag with Cardholder
The slimline, IP67 tag can be carried in the pocket, on a keyring or with a neck strap, and has the following
features:
Ultra low-power microcontroller and a non-replaceable, high-capacity coin cell battery
Pushbutton for alarm generation, battery status or general debugging.
Configurable Bi-color LED for Alarm indication, battery status or other functions
3-Axis accelerometer for energy saving, freefall detection, among other features
UHF interface for long-range communication with readers
3D-LF receiver for marker detection, configuration, zone location, direction detection
NFC interface for configuration and access control features and mobile mustering
There is an additional photo card ID holder that can be snapped on to the main unit.
ID
Card holder
LED Indicator
Pushbutton
2.1.1 UHF Interface
The UHF interface is a wireless communication interface using the UHF ISM frequency band and IDENTEC’s
protocols.
The iQ355 P has an internal UHF antenna and can communicate up to a range of 500 meters with a reader or
iPOINT device.
2.1.2 LF Interface
The LF Interface uses IDENTEC’s LFBOOST Marker technology. Zone location at Low Frequency can be achieved
with a configurable field range up to 5 Meters. This allows Tag detection in a specific area.
2.1.3 NFC Interface
The NFC Interface is a Near Field Communication interface. The iPOINT can be used as an entry terminal.
Alternatively the tag can communicate with access control system over standard NFC interfaces. The range from
the iPOINT to the Tag is around 10-15cm.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels IDENTEC SOLUTIONS Point d'accès sans fil
Manuels Point d'accès sans fil populaires d'autres marques
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur
Ubiquiti
Ubiquiti NanoStation NSM2 Manuel utilisateur
Cisco
Cisco Aironet 1550 Series Manuel utilisateur
Aruba
Aruba IAP-335 Manuel utilisateur
Advantek Networks
Advantek Networks AWN-AP-54MR Manuel utilisateur
IP-COM
IP-COM AP355 Manuel utilisateur
