iDance XD3 Manuel utilisateur
Bluetooth Home Party Speaker with Synchronizing Disco Lights
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
Thank you for purchasing this Audio System.
Instrucon Manual
The iDance XD3 is a Wireless All-In-One DJ Party Box System with an integrated mixer. It accepts
microphone, guitar, line-in audio, and stereo Bluetooth wireless audio up to 10 meters. The XD-3
also includes a built-in FM radio and USB MP3 player. Pair your device easily with only a few simple
steps! The XD3 is also embedded with disco party lighng – just turn your music on and everything
is ready to go!
You may also record a playback mix directly onto USB using the XD-3’s premium record funcon.
You can record FM radio, your own voice or a guitar too.
The XD3 is perfect for DJs, house / pool / yard pares, or for karaoke applicaons. Take your sound
with you wherever you go!
Thank you, and congratulaons on your choice of iDance’s XD3!
WHAT’S IN THE BOX
OVERVIEW
Contents
1.
2.
3.
iDance XD3 main unit
AC-DC Power Adaptor (10.5V DC)
Instrucon Manual
Read these instrucons.
Keep these instrucons.
Heed all warnings.
Follow all instrucons.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any venlaon openings. Install in accordance with the manufacturer’s
instrucons.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched parcularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
Only use aachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use cauon when moving the cart/apparatus
combinaon to avoid injury from p-over. Portable Cart Warning
Unplug this apparatus during lightning storms or when unused for long periods of me.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
The baery shall not be exposed to excessive heat such as sunshine, fire or the like.
The MAINS plug is used as the disconnect device, which shall remain readily operable.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
IMPORTANT SAFETY INSTRUCTIONS
AUX line input (3.5mm Stereo Mini Jack)
Microphone & Guitar input (1/4” Jack)
Bluetooth wireless stereo audio streaming
Support A2DP Profile for most smart phone / laptop
USB Mp3 Player & Recorder
(Support Mp3/WMA/Wav format playback, Wav@128kbps recording)
On board jingle sound for your mix
Disco lighng ready to go
Built-in FM radio tuner
Intelligent cross-fader for CUE
2 x Big DJ jog wheel for DJ filter and delay FX
2 x 4” Full range Driver
200W MAX Power output
Smartphone / tablet stand
FEATURES
CONTROL LOCATION (1.1)
11 12
123456 7 8910
12 13
Front View - 2 x 100W speaker
E1
CONTROL LOCATION
GENERNAL OPERATION
TROUBLESHOOTING
SPECIFICATIONS
..................................................................
..................................................................
..................................................................
..................................................................
E1-E4
E5-E6
E7
E8
CONTENTS
MIC input(1/4” Jack)
6.3mm unbalanced jack for microphone input
GTR input(1/4” Jack)
6.3mm unbalanced jack for guitar (or other Hi-Z instrument) input
Aux-In(mini jack)
Connect your music device to this socket with the 3.5mm mini jack cable
USB Input
Connect USB drive (up to 32GB) to this port for MP3/WMA/WAV playback
Smartphone / Tablet cradle
Cradle to display your smartphone/tablet.
LCD
Shows the status of the XD3.
- In MP3 mode, the track tle and song index of the song will be shown
- In Tuner mode, the channel number and frequency will be shown
Master Output (RCA)
Connect external PA system to this master output for bigger sound. The level of this output is
controlled by the master volume knob.
CUE Phone output (1/4”Jack)
Connect a ¼” jack headphone to this output for CUE.
Note: The signal of this headphone output is reverse to the cross fader and speaker output,
When the cross fader is at “MP3/Tuner”, the Bluetooth signal will be heard on the CUE
headphone. When the cross fader is at “Bluetooth”, the MP3/Tuner audio will be heard on
the CUE headphone.
FM Antenna
Extend this antenna in Tuner mode and swivel it around to find the best recepon.
DC Jack In
Connect the power adapter to power up the XD3 unit.
DJ DELAY effect jog wheel
Turn this jog wheel clockwise to add a DJ delay effect to the master output.
Turn the wheel more to increase the delay effect.
Note: To turn off the delay effect, turn the Delay jog wheel all the way to the le.
8x Jingle Pads
Press Jingle Pads to mix the preset jingle sounds to your music.
Adjust the pitch and tempo in real me by turning the jingle pitch knob.
DJ Filter effect jog wheel
Turn the jog wheel to add a wide dynamic DJ filter on the master output.
Turn clockwise posion for parametric Low pass filter (LPF) and counter
clockwise for parametric HPF.
Note: To return to normal sound, turn the jog wheel back to the middle.
The iDance logo on the jog wheel will be straight, as shown here:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
CONTROL LOCATION (1.2)
E2
CONTROL LOCATION (2.1)
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Top View Control Knob
E3
Play / Pause
- In MP3 mode, press to Play/Pause the music
- In Tuner mode, press for auto scanning
Mode
Press to change between Tuner and Mp3 mode.
Standby Buon
Press to turn ON the XD3 or put the XD3 into standby mode.
When XD3 is not in use, please put XD3 into standby mode to save energy.
Stand By Indicator
The indicator light off - power on . The indicator light on - standby mode.
Phones volume knob
Turn this knob to adjust the CUE headphone output volume.
Voice Changer
Change your microphone voice into beast (Low) or kid (Hi) by turning this knob to Hi or Low.
Please switch back to Normal for normal microphone voice
Mic volume knob
Turn this knob to turn the microphone volume
Intelligent Cross Fader
Mix your music between MP3/Tuner and Bluetooth music.
Turn the cross fader to the le for MP3/Tuner, the speakers will put out MP3/Tuner audio
while the CUE headphone will be on Bluetooth.
Turn the cross fader to the right for Bluetooth, the speakers will put out Bluetooth audio
while CUE headphone will be on MP3/Tuner.
Next / Previous
- In MP3 mode, press to select next or previous track.
- In Tuner mode, press to select next or previous preset FM channel.
Master volume knob
Turn to adjust the Master output volume.
(for speaker and master output RCA)
Record
Press to record your master mix into a connected USB drive in .wav format.
Note: During USB recording, USB playback is disabled and would automacally switch to
Tuner mode
Jingle Pitch
Turn to adjust the tempo and pitch for the jingles in real me.
Turn clockwise for pitch-up and faster tempo, and turn counter clockwise for pitch-down and
slower tempo. Turn the knob back to the middle posion to return to the original pitch and
tempo.
Jingle volume pot
Turn to adjust Jingle mix volume
Equalizer
Press this buon to cycle through 8 different preset EQs on Master output for your favorite.
14.
15.
16 .
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
CONTROL LOCATION (2.2)
E4
GENERAL OPERATIONS
AC 230~240V 50Hz
Right side of the main unit
Power Connecon
Connecng Bluetooth to your smartphone / tablet
Press the Standby buon to turn on the XD3
(XD3 Bluetooth is ready to connect aer turning ON)
On your smartphone / Tablet, turn on Bluetooth and enable device scanning
When “XD3” shows up on the Bluetooth scan, select it to connect it to your device.
When both devices are successfully connected, you are ready to play music wirelessly
from your device.
1.
2.
3.
4.
NOTE:
When Bluetooth is NOT connected, the LED ring on Play/Pause buon will blink.
When Bluetooth is successfully connected, the LED ring on Play/Pause buon will stay ON
E5
Autres manuels pour XD3
1
Table des matières
Autres manuels iDance Système de haut-parleurs
Manuels Système de haut-parleurs populaires d'autres marques
Sondpex
Sondpex Active Speaker System and Digital Music... Manuel utilisateur
JVC
JVC NX-PN7 Manuel utilisateur
Marshall Amplification
Marshall Amplification AR-DM61-BT Manuel utilisateur
Yamaha
Yamaha NX-A01 - Speaker Sys Manuel utilisateur
SE Audiotechnik
SE Audiotechnik I-LINE Manuel utilisateur
Gemini
Gemini WRX-843 Series Manuel utilisateur