iCucina AF9204 Manuel utilisateur
1700-WATT AIR FRYER
Model: AF9204
User Manual
-READ ALL INSTRUCTIONS BEFORE USE-
IMPORTANT SAFEGUARDS
READ ALL INSRUCTIONS
When using electrical appliances, basic safety precautions should always be taken:
1. Do not touch hot surfaces.
2. Do not place the unit close to flammable materials, heating units or wet
environments.
3. Close supervision is necessary when any unit is used by or near children.
4. To protect against electrical shock, do not immerse cord, plugs or the unit
in water or other liquid.
5. Do not let the cord hang over the edge of a table, counter or anywhere
near hot surfaces.
6. Unplug from outlet when not in use. Allow to cool before disassembling,
moving and cleaning.
7. Not intended for outdoor use.
8. Do not place unit on or near hot gas and or electric burners.
9. Extreme caution must be used when moving unit containing hot oil or
other hot liquids.
10. To disconnect, transfer the timer to the shutdown and turn the thermostat
down, then remove the plug from the wall outlet. Let cool down.
11. Never put the appliance against the wall or other appliances. There should
be at least 3 inches of free space for all sides, including above the unit.
Do not place anything on top of the appliance.
12. It is normal for some smoke to escape the unit when heating for the first
time.
13. If a lot of smoke is escaping from the air vent during operation, unplug
the unit immediately and contact customer service.
14. Keep hands and face away from the vent outlet or where heat or steam is
being released. Never use a towel to block the vent.
15. During air frying, hot steam is released from the air outlet opening. Keep
your hands and face distanced from the steam and from the air outlet
opening. Be careful of hot steam when you remove the Fry Pan Basket
from the appliance.
16. Make sure the ingredients prepared in this appliance come out golden
yellow instead of burnt and dark. Remove burnt remnants. Consuming
burnt remnants may result in future health issues.
17. If any troubles arise during operation, necessary service must be
authorized by the manufacturer for repairs.
18. The use of other accessories that are not packaged with this unit is not
recommended. Doing so may damage the unit and can cause accidents.
19. Do not replace with other parts that are not designed specifically for this
air fryer unit.
20. Do not use metal utensils with the coated Fry Pan Basket as this can
damage the surface.
SAVE THESE INSTRUCTIONS!
WARNING
Please immediately unplug and send unit to our
Customer Service Department in case of other
problems.
DO NOT USE UNIT FOR OTHER THAN
INTENDED USE
Put the appliance on a surface that is horizontal, flat and stable. This appliance is
intended for normal household use. It is not intended to be used in environments
such as staff kitchen of shops, offices, farms or other work environments. Nor is it
intended to be used by clients in motels, bed and breakfast and other residential
environments.
CAUTION
* Always put the ingredients to be fried in the Fry
Pan Basket to prevent direct contact with the heating
components.
* Do not cover the air inlet and outlet opening
while the appliance is operating.
* Do not pour oil into the Fry pan, this may create
a fire hazard.
* Never touch the inside of the appliance while it
is operating.
SAVE THESE INSTRUCTIONS!
FOR HOUSEHOLD USE ONLY
PARTS AND ACCESSORIES
NOTE: Unpack all listed contents from packaging. Varies by model. Please
remove any clear or blue protective film on the components.
1
5
6
7
8a
8b
9
10
11
2
3
4
1. Main Unit
2. Control Panel
3. Air Intake Vents
4. Hot Air Outlet Vents
5. Air Flow Racks
6. Rotating Mesh Basket
7. Drip Tray
8a. Skewers (10pcs)
8b. Adjustable Skewers Racks (2pcs)
9. Rotisserie Shaft, Forks & Set Screws
10. Rotisserie Fetch Tool
11. Protection cover
ACCESSORIES
The fry pan and fry pan basket become extremely HOT during the cooking
process. Do not touch the accessories during and immediately after cooking. Only
hold the fry pan by the handle and use caution when removing these items from
the unit. Always wear oven mitts or use potholders when handling hot accessories.
Allow everything to cool completely before cleaning.
IMPORTANT REMINDER
Please make sure that your Air Fryer Oven has been shipped with the components
that you ordered (as some accessories may be sold separately). Please check
everything carefully before use. If any part is missing or damaged, do not use this
product. Contact shipper using the customer service information located on the
last page of this manual.
USING THE ACCESSORIES
1. Insert Drip Tray into bottom of the unit.
2. Place Air Flow Racks into unit by sliding them through the side grooves
and onto the back lip (FIG. A).
3. Place Air Flow Racks closer to the top heating element for faster cooking
and added crisp (FIG. B).
4. Switch the Air Flow Racks mid-cycle for even cooking.
FIG.A FIG.B
COMPONENTS
SKEWER RACK (×2) ROTISSERIE SHAFT SKEWERS SET SCREWS
(FRONT VIEW) (LEFT SIDE) (RIGHT SIDE) (×10) (×2)
ROTISSERIE SHAFT & SKEWER RACKS
1. Place the two Skewer Racks at each end of the Rotisserie Shaft. Make
sure the Set Screws are on the outer side of the Rotisserie Shaft.
2. Slightly tighten Set Screws. Do not over tighten as you may need to
adjust the tightness after you insert the Skewers.
3. Carefully poke Skewers through food.
ROTISSERIE SPIT ASSEMBLY
1. Insert each Skewer point through holes on the left Skewer Rack (FIG. C).
2. Squeeze the clip-end of each Skewer as you insert into the opposite
Skewer Rack slot to secure.
3. Release clip to securely rest in slot as shown (FIG. D).
4. Repeat process 3 through 6 in a uniform manner around the Skewer Rack.
Make sure Skewers are evenly spaced.
5. Tighten the Set Screws to make sure they are securely in place.
6. Use caution while inserting the Spit into the Unit to prevent getting poked
by the Skewer ends.
PLACE ROTISSERIE SPIT OR ROTATING MESH BASKET INTO
UNIT
1. Insert the left side of the assembled Spit or Basket first into the Rotisserie
Shaft socket. Be sure the Rotisserie Shaft is in place to engage rotation
(FIG. E).
2. Place the right side onto the hanger (FIG. F).
FIG. E-LEFT SIDE
REMOVE ROTISSERIE SPIT OR ROTATING BASKET FROM UNIT
1. Open Unit door to pause cooking cycle or turn Unit off by pressing the
Power Button.
2. Insert Rotisserie Fetch tool beneath the Rotisserie Shaft.
3. Lift the right side of the Rotisserie Fetch tool at a slight angle to clear the
bracket, then shift to the right until the left side of the Shaft slides out of
the Rotisserie Shaft socket.
4. Carefully remove the rotisserie food from the oven.
FIG. F-RIGHT SIDE
PLACE PROTECTION COVER INTO UNIT
1. Insert protection cover into top of the Unit, protect the food, and avoid
touching the heat element (FIG. G).
2. Activity protection cover, easy to remove and clean (FIG. H).
FIG.G FIG.H
PLACE DOOR GLASS INTO UNIT
Activity door glass, easy to remove and clean (FIG. I). If the door glass is not
inserted, the Unit will not work.
FIG.I
IMPORTANT: See the Final Assembly diagram to help identify
the left and right sides of the Rotisserie Shaft before placing
it in the Unit. The right side has two notches, and the left
has one.
Table des matières
Autres manuels iCucina Friteuse
