ICP DAS USA I-7188XC Manuel utilisateur
1
Quick Start Guide for I-7188XC
July 2012, Version 1.1
Congratulations on purchasing I-7188XC. This Quick Start Guide will provide
information needed to get started. Please also consult the User Manual for detailed
information on the setup and use of I-7188XC.
In addition to this guide, the package includes the following items:
I-7188XC Software Utility CD RS-232 Cable Screw
(CA-0910F) (1C016)
7188XC_Manual_English.pdf/7188XC_Manual_Chinese.pdf
CD:\Napdos\7188XABC\7188XC\Document
http://ftp.icpdas.com/pub/cd/8000cd/napdos/7188xabc/7188xc/document/
I-7188XC Website
http://www.icpdas.com/products/PAC/i-7188_7186/i-7188xc.htm
ICP DAS Website
http://www.icpdas.com/
2
1
----------------------------------------------------------------------------------
Software Installation
Step 1: Insert the companion CD into the CD drive.
Step 2: Copy the 7188XC folder from CD:\Napdos\7188XABC\ to the Hard Drive of the
Host PC.
Step 3: Install the MiniOS7 Utility.
Locate and execute the minios7_utility_vXXX.exe file from
CD:\NAPDOS\MINIOS7\UTILITY\MiniOS7_utility\ folder or
http://ftp.icpdas.com/pub/cd/8000cd/napdos/minios7/utility/minios7_utility/
Step 4: Copy the 7188xw.exe file from the CD:\Napdos\MiniOS7\utility\ folder to the PATH
directory, for example C:\Windows\.
After all the software is copied to the Host PC, the content of 7188XC folder should be as
follows:
7188XC
Demo Demo programs for the I-7188XC(D)
BC_TC Demo programs for the BC++ and the TC++ compiler
MSC Demo programs for the MSC compiler
7188XC_DemoList.htm Demo list for the I-7188XC(D)
Document Documents related to the I-7188XC(D)
OS_image The MiniOS7 image file matches the demo programs
Readme.html The detailed description about the 7188XC folder
Note: The 7188xw.exe file is used as a bridge between the I-7188XC(D) and the Host PC.
Therefore, the 7188xw.exe file must be copied to the “C:\Windows\” folder to allow it to be
executed from any location.
2
----------------------------------------------------------------------------------
Connecting the Download Cable to the Host PC
Step 1: Connect the CA0910F download cable between COM1 of the I-7188XC(D) and the
COM Port of the Host PC, as shown in the diagram below.
Step 2: Apply power (Vs+, GND) to the I-7188XC(D). Vs+ can be in a range from +10V to
+30V DC.
3
Step 3: After applying the power, the 5-digits of the 7-SEG LED will continuously show as
follows.
If the non-display version of module is being used, please continue to the next step.
Step 4: Check that the red LED continuously blinks one times and wait for one second to
next cycle. The diagram show as follows:
Note: Only the display version of the module will include a 5-digit 7-SEG LED.
Hour
Minute
Second
Connect to the COM Port
of Host PC with download
cable, CA0910F
Connect to the
Power supply
Vs+
GND
5-digit 7-SEG LED
Red LED
Connect INIT*
with GND
4
3
----------------------------------------------------------------------------------
Downloading Programs to the I-7188XC(D)
Before using the MiniOS7 Utility, ensure that the download cable is connected from the Host
PC to the I-7188XC(D) and ensure that no other programs are running on the I-7188XC(D).
The program download procedure is as follows:
Step 1: From the Windows START menu, go to Programs/ICPDAS/MiniOS7 Utility Ver
XXX/and locate the MiniOS7 Utility Ver XXX.
Step 2: Press and Select “New connection”. Choose the right COM port
and set other parameters. Click OK button and the utility will search module
automatically.
2
1
5
Step 3: See if the MiniOS7 Utility connects with I-7188XC. The connected icon is . The
disconnected icon is .
Step 4: Select the file to load from left side and click to load file into module or
draw the file to the right side.
See here
to know connection
status.
I-7188XC(D) file list
Host PC file list
6
Step 5: Select the file and then press the right mouse button. Choose the Run and press to
execute the program.
Step 6: The result of the program will be shown in 7188xw window.
7
NOTE: The 7188xw window has to be closed and then the download operation (Step 4) could
be done.
The content of the Hello.c file is as follow:
#include “7188xc.h” /* Include the headers to use 7188xcl.lib
functions */
void main(void)
{ InitLib(); /* Initiate the 7188xc library */
Print("Hello world!\r\n"); /* Print the message on the screen */
}
Table des matières
Autres manuels ICP DAS USA Contrôleurs
ICP DAS USA
ICP DAS USA WinPAC-5000 Manuel utilisateur
ICP DAS USA
ICP DAS USA TPD-283U-M1 Manuel utilisateur
ICP DAS USA
ICP DAS USA GRP-2841M-5GE Manuel utilisateur
ICP DAS USA
ICP DAS USA WISE-52 Series Manuel utilisateur
ICP DAS USA
ICP DAS USA LP-22 Series Manuel utilisateur
ICP DAS USA
ICP DAS USA 7188XA Instructions d'utilisation
ICP DAS USA
ICP DAS USA I-8411 Manuel utilisateur
ICP DAS USA
ICP DAS USA I-7188E3 Manuel utilisateur
ICP DAS USA
ICP DAS USA LP-9821 Manuel utilisateur
ICP DAS USA
ICP DAS USA TPD-433F Manuel utilisateur
ICP DAS USA
ICP DAS USA tWF-DA1PD2R1 Manuel utilisateur
ICP DAS USA
ICP DAS USA ALM-06-WF Manuel utilisateur
ICP DAS USA
ICP DAS USA WISE-52 Series Manuel utilisateur
ICP DAS USA
ICP DAS USA NMC-9181 Guide d'installation
ICP DAS USA
ICP DAS USA SMS-531 Manuel utilisateur
ICP DAS USA
ICP DAS USA XP-9 88-IoT Series Manuel utilisateur
ICP DAS USA
ICP DAS USA LP-8x4x Manuel utilisateur
ICP DAS USA
ICP DAS USA WISE-75 M Series Manuel utilisateur
ICP DAS USA
ICP DAS USA 7188XA Manuel utilisateur
ICP DAS USA
ICP DAS USA I-8091 Manuel utilisateur
