Icemobile BLIZZARD III Manuel utilisateur

1.1 Phone overview

1.Technical specifications

Dimensions (W×D×H): 106.3X46X13.5MM

Weight:with out battery 67 Grams

Lithium battery:NOkia 5C

Rated capacity:1000Mah

Continuous standby duration: (Relates to network status)

100 Hours

Continuous conversation duration: (Relates to network

status) 130 Mins

Please refer to their labels for other data related to the

battery and the charger.

2Getting started

2.1InstallingtheSIMcards

Remove the back cover and lift battery away. Insert SIM

card into the SIM card slot lightly.

2.2 Installing T-Flash Card

To install the T-Flash card, open its latch, place its

indented side downward, insert the card into the card slot,

and then close the latch.

To remove the T-flash card, open its latch and

slightly press the card inward. The card will automatically

pop out. Close the latch.

2.1 Charging the Battery

The lithium battery delivered with the mobile phone

can be put into use immediately after being unpacked. A

new battery will have maximum performance after the first

three full charge/discharge cycles.

2.2 Linking to the Network

The mobile phone automatically searches for an available

network.

Dialing a call to a number in the phonebook

Enter the phonebook and use the upward and/or

downward direction keys to find the telephone number you

want to call.

Press the Dial key. The mobile phone automatically dials

the chosen telephone number.

Redialing the last number

In the standby interface, press the dial key to show the

dialed calls.

Press the upward and/or downward direction keys to select

a number you want to dial and then press the Dial key.

Adapting volume

During a conversation, you can press the Up and/or Down

direction keys to tune the sound volume.

Answering incoming calls

Press the Dial key or the Left soft key to answer an

incoming call.

Press the End key to end the current conversation.

To reject an incoming call, press the End key or the Right

soft key.

Using options during a conversation

Select Options during a conversation to pause, end the

ongoing call, originate a new call, browse the phonebook,

view information, set the mute, set the DTMF, or perform

other operations. For details, refer to the menu guide.

2.3 Using the Headset

It would enter headset mode automatically when you

insert headset to the slot. Make sure of inserting it at the

bottom of the slot, or you can’t use it normally.

3Input method

This mobile phone provides multiple input methods,

including English input in both upper and lower case, and

numeric input method.

3.1 To Shift Entry Methods

Press the #key to switch between input methods.

3.2 Numeric Input

You can input numbers with the numeric input method.

Press a number key to input the corresponding number.

3.3 Inserting a Symbol

Press the *key to enter the Select symbol interface,

use direction keys to select a symbol you want.

4Using the Menus

4.1 Call center

Missed Calls: You can view a list of the latest missed

calls.

Dialed Calls:You can view the latest dialed calls. Choose

dialed calls and then select a dialed call to delete, save,

dial, or edit (or send a short message to it).

Received Calls:You can view the latest received calls.

Choose received calls and then select a received call to

delete, save, dial, or edit (or send a short message to it).

Rejected calls:A list of calls you’ve rejected.

Delete all :You can delete the latest call records.

Call Timers

GPRS flow rate

Last sent: Viewing the rate of last session sent

Last received: Viewing the rate of last session received

All sent: Viewing all of the rate of sessions sent

All received: Viewing all of the rate of sessions

received

Reset counter: Clearing all rates.

4.2 Multimedia

Camera

This function enables you take a picture you want. Roll the

phone to align the camera to the picture and then press OK

key, which the picture will be stored in the album.

Select “option”and you can set some paramount of photo

and camera, and scan the pictures you’ve taken in gallery

and view the storage status.

Analog TV

Video recorder

This function enables you to record dynamic pictures.

Adapt the VCR to the scene or the figure, the press OK to

start or pause recording. Press STOP to end recording, and

the phone would save the file automatically.

Video player

This function enables you play, send, rename, delete, delete

all files, rank or save your video and movies.

Image viewer

This function enables you view, edit, slide show, use as,

send, rename, delete, delete all files, rank and save about

your pictures.

Audio Player

The audio player provides four buttons: Play or Pause, Stop,

Back, and Forward which are corresponding to the up

direction key, down direction key, left direction key and

right direction key. The audio player supports MP3,

formats. Press # key and * key to increase or decrease

volume.

Recorder

The phone support WAV. The recording file you stopped

would be stored in file list automatically. You can select

storage location as needed. The path is

Multimedia>recorder>option>storage location>Udisk/

Memory card.

FM Radio

Your phone is equipped with an FM radio. You can use the

application as a traditional FM radio with automatic tuning

and saved channels. Press # key and * key to increase or

decrease volume.

File manager

The phone provides a certain space for users to manage

files and supports the T-Flash card. The capacity of the

T-Flash card is selectable. You can use the file manager to

conveniently manage various directories and files on the

phone and the T-Flash card.

Choose File manager to enter the root directory of the

memory. The root directory will list the default folders,

new folders and user files. When the mobile phone is

powered on for the first time or when you have not changed

the directory, the root directory contains the default folders

only.

You can use this function to format all the data in the

memory. The system will re-create a default folder. The

formatted data cannot be recovered. Therefore, think twice

before using the formatting function.

4.3 Phonebook

The mobile phone can store up to 500 telephone numbers.

4.4 User profiles

The mobile phone provides multiple user profiles, so that

you can customize some settings to adapt to the specific

events and environments.

Customize the user profiles according to your preference

and then activate the user profiles. The user profiles fall

into five scenarios: General, Meeting, Outdoor, Indoor

and Silent.

Select option, and you can perform the following

operations: Activate, Settings and Rename.

Note: In standby state, hold the # key to switch to the mute

mode. To switch back to the original mode, hold the # key

again.

4.5 Messages

If the short message memory is full, a blinking SMS icon

appears on the top of the screen. To normally receive short

messages, you need to delete some of the existing short

messages.

4.6 Tools

Alarm

Three alarm clocks are set but deactivated by default. You

can activate one, multiple or all of them as needed. For

each alarm clock, the ringing date and the ringing time can

be set. When the preset alert time is up, the mobile phone

gives off an alert tone whereas the current date and time

blinks on the screen. Select Stop to stop the ring or Snooze

to temporarily stop the ring. If you select Snooze, the alarm

clock will ring four minutes later.

Calendar

Once you enter this menu, there is a monthly-view calendar

for you to keep track of important appointments, etc. Days

with events entered will be marked

Bluetooth

E-Book reader

Calculator

Hold down the ‘*’key to get the decimal point. Confirm

with the OK key or the left soft key.

Note: This calculator provides limited precision and is only

applicable to simple arithmetic calculation.

World clock

Torch

STK

4.7Settings

Dual SIM Settings

Dual-SIM: Dual-SIM refers to two SIM card slots, and

the two cards can standby at the same time or set

one of them to display on the idle screen.

Call Setup

◆Network selection: Set Network selection mode to

Automatic or Manual. Automatic is recommended. When

Network selection mode is set to Automatic, the mobile

phone will prefer the network where the SIM card is

registered. When Network selection mode is set to Manual,

you need to select the network operator's network where

the SIM card is registered.

Call waiting

Activate: After you choose Activate, the mobile phone

will contact the network. A moment later, the

network will make a response and send a message

to acknowledge your operation. If the call waiting

function is activated, the network will alert you and

the mobile phone screen will display the incoming

call number if others are calling you while you are

already in a conversation.

Deactivate: If you choose Deactivate, the network will

not alert you when others are calling you while you

are already in a conversation.

Query status: Query the network to obtain the current

call waiting status.

Hide ID:When you call someone, he or she can’t find

out your number if you enable this function.

Line selection: Switch to Line 1 or Line 2. By default,

Line 1 is used.

Note: If you choose Line 2, dialing may fail. This depends

on the implementation of the network operator.

Phone Settings

Time and date: Set time, date, time format and

date display type.

Language: Select the display language for the

mobile phone.

Display

Select images and set them as wallpaper and idle display.

You can set duration of backlight and keypad light.

Security Settings

This function provides you with related settings about

safety use. To set the SIM1 lock, you need to input the PIN.

You can set the SIM lock only after inputting the correct

PIN. If you set SIM1 lock to On, you need to input the PIN

each time you power on the mobile phone. In the case you

input a wrong PIN for three consecutive times, you need to

input the PIN Unblocking Key (PUK). The PUK is used to

unlock and change the locked PIN. To obtain the PUK,

contact the network operator. Fixed dial requires the SIM

card's support and the network operator's support. When

the fixed dial function is activated, you can dial only the

numbers in the fixed dial list. To activate the fixed dial

function, you need to input the PIN2. Barred dial requires

SIM card’s support, you can activate or deactivate barring

of some or all calls. Phone lock enables you to lock/unlock

the phone. Input password to switch on or off the phone.

Password is required when the phone is locked. The

password is 4 to 8 digits. Keypad lock enables you to

lock/unlock the keypad. Setting the auto locking time that

5s, 30s, 1min or 5mins is available. The keypad will be

auto locked with no operation during the period.

Restore factory settings

Restore settings: Choose Phone Settings > Restore settings

to restore the factory settings. Input the phone lock code

and then select OK or press the Left soft key.

Note: The initial phone lock code is 1234.

4.7 ICE SMART ZONE

Face book,

Box man,

MSN

Yahoo

Table des matières

Autres manuels Icemobile Téléphone portable

Icemobile

Icemobile APOLLO TOUCH Manuel utilisateur

Icemobile

Icemobile RING LITE Manuel utilisateur

Icemobile

Icemobile ACQUA Manuel utilisateur

Icemobile

Icemobile ROCK2.4 Manuel utilisateur

Icemobile

Icemobile Hydro Manuel utilisateur

Icemobile

Icemobile CHARM Manuel utilisateur

Icemobile

Icemobile CENIOR Manuel utilisateur

Icemobile

Icemobile SUBMARINE Manuel utilisateur

Icemobile

Icemobile Charm II Manuel utilisateur

Icemobile

Icemobile prime 4.0 Manuel utilisateur

Icemobile

Icemobile Prime 4.5 Manuel utilisateur

Icemobile

Icemobile Gravity Pro Manuel utilisateur

Icemobile

Icemobile TWILIGHT II Manuel utilisateur

Icemobile

Icemobile RING MINI Manuel utilisateur

Icemobile

Icemobile TROPICAL III Manuel utilisateur

Icemobile

Icemobile Hydro Manuel utilisateur

Icemobile

Icemobile ROCK MINI Manuel utilisateur

Icemobile

Icemobile DIAMOND DUST Manuel utilisateur

Icemobile

Icemobile Clima II Manuel utilisateur

Icemobile

Icemobile Prime 5.0 Manuel utilisateur

Icemobile

Icemobile VIENTO II Manuel utilisateur

Icemobile

Icemobile QUATTRO Manuel utilisateur

Icemobile

Icemobile WAVE Manuel utilisateur

Icemobile

Icemobile TWISTER Manuel utilisateur

Manuels Téléphone portable populaires d'autres marques

Zte

Zte BLADE A520 Manuel utilisateur

Nokia

Nokia Lumia 620 Manuel utilisateur

Blackbe;rry

Blackbe;rry KEYone Manuel utilisateur

Bea-fon

Bea-fon X5 Premium Manuel utilisateur

Blackbe;rry

Blackbe;rry 8707 Series Manuel utilisateur

Blackbe;rry

Blackbe;rry Storm Mode d'emploi

LG LM-X420QN Manuel utilisateur

LifeWatch

LifeWatch V Manuel utilisateur

Bea-fon

Bea-fon SILVER LINE SL860 Manuel utilisateur

IKI Mobile

IKI Mobile KF4.5i Manuel utilisateur

Hitech

Hitech HT-850 Manuel utilisateur

Yezz

Yezz Fashion F10 Manuel utilisateur

Point Mobile

Point Mobile PM60 Manuel utilisateur

Blackbe;rry

Blackbe;rry Q10 Manuel utilisateur

Blackbe;rry

Blackbe;rry Bold 9900 Manuel utilisateur

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manuel utilisateur

LG LM-K420EMW Manuel utilisateur

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manuel utilisateur