ICC ICRESAM38C Manuel utilisateur
3x8 Bidirectional
Amplifier Module
ICC’s Bidirectional Amplifier enhances CATV signal strength
and provides of CATV signals throughout the home. The
Video Amplifier supports addressable set-up-box
and is used at two-way communication network
with return path for interactive TV or pay-
per-view CATV system.
3x8 Bidirectional Amplifier Module
INSTALLATION INSTRUCTIONS
Residential Cabling Solutions
ASSEMBLY INSTRUCTIONS
© Copyright 2007, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. MSR-0436 revA
3x8 Bidirectional Amplifier Module, 1 piece
A
DC power supply , 1 piece
B
ICRESAM38C
INCLUDES:
Step 1.
1. Place module horizontally and align fasteners
with the enclosures peg board. Make sure the
fasteners are NOT in locked positions.
(See FIG 1.
and FIG 2.)
Step 3.
3. Once the bracket is in the desired location push
the fasteners into their locked position.
Step 2.
2. Push the module so that the fasteners insert
into the peg board of the enclosure.
B
A
Step 4.
d
4. To setup the Bidirectional amplifier, connect the DC power to the appropriate power source. Connect the video source to the “INPUT” port and the
amplified signal will be at the “OUTPUT” port of the video amplifier. Connect the output port to a video device; such as TV’s, or the input of the
Video Splitter module for distributing throughout the home.
ASSEMBLY INSTRUCTIONS
Table des matières
Autres manuels ICC Amplificateur
