iCarsoft i620 Manuel utilisateur
iCarsoft i620 Bluetooth Quick Start
When you get this exquisite device, please operate as following.
First Step:
Install related software to your mobile-phone (just support Android software system
and Windows software): please download the TORQUE from Android Market.
After install the related software to your mobile-phone then all is finished. Of course,
you also can use the TORQUE and Dashcommand software from the CD of the device
which we supply to you. Please refer to the following pictures.
Second Step:
Connect the iCarsoft Bluetooth OBD Multi-Scan Tool i620 to your Car OBD interface,
you can find the light of the iCarsoft Bluetooth OBD Multi-Scan Tool i620 will flash (it
shows the connection is good), then it coming in standby and waiting for working.
Usually the CAR OBD interface are under the steering wheel (above the brake), some
are hided in the tool box of the hand brake, you can refer to the following picture to
find it.
NOTE!!!
the switching function of i620: No need to draw the iCarsoft Bluetooth OBD Multi-
Scan Tool i620 after the car stall (but still have power supply), 30 minutes later it will
automatically come to sleep mode and stay in power saving condition. Tomorrow
morning or next time to start the vehicle you can use the iCarsoft Bluetooth OBD
Multi-Scan Tool i620 directly only by press the switch, no need to plug again, you
don’t need to make mobile-phone connection again, it can connect to it
automatically.
Third Step:
connect with mobile-phone
iCarsoft Bluetooth OBD Multi-Scan Tool i620 (Bluetooth) need the password to make
the verification, open the ‘Setting’ of your mobile-phone, unfold the Bluetooth, click
the ‘Bluetooth setting’ and scan the Bluetooth, choose ‘iCarsoft ‘and put the 1234 as
password, then finished all operation.
Forth Step:
After connection and setting, exit and open the related software TORQUE or
Dashcommand, then respectively doing several settings as following:
Open TORQUE, select ‘setting’, click OBD adapter setting, choose the connection
(Bluetooth) and select iCarsoft, then exit and back. Reopen the software, then it can
connect automatically and read data.
Table des matières
Autres manuels iCarsoft Équipement de diagnostic
iCarsoft
iCarsoft HD V3.0 Manuel utilisateur
iCarsoft
iCarsoft CR MAX BT Manuel utilisateur
iCarsoft
iCarsoft CR IMMO Manuel utilisateur
iCarsoft
iCarsoft CR MAX Manuel utilisateur
iCarsoft
iCarsoft CR Genius Manuel utilisateur
iCarsoft
iCarsoft Multi-system Car Diagnostic Tool Series Manuel utilisateur
iCarsoft
iCarsoft CR Legend Manuel utilisateur
iCarsoft
iCarsoft V2.0 Series Manuel utilisateur
