i365-Tech A19 Manuel utilisateur
A19 User Manual
Please read the instruction manual before using, in order to install SIM card
properly and use the product easily.
1. How to use
1. before using: please check the ID number of this product in the label of external
box; find out all accessories inside the box.
2. Before power on: please insert GSM network SIM card or WCDMA network SIM
card, GSM mode can supports one of the network modes: GSM 850,900,1800,1900MHZ;
WCDMA mode can support: either WCDMA 850/1900 or WCDMA 900/2100 ( depends on
which type you buy, you can check with your reseller or operator for more detail regarding
WCDMA), open the caller ID function and monthly traffic data from your mobile operators
(not less than 30 MB/month traffic package). Please note that this product supports 2G
GSM and 3G WCDMA. There must be internet traffic available in the SIM card. This locator
doesn't support 4G.
3. Power on: press the power button for 3 seconds or more until power on.
4. Power off:
APP: entering Setting——Remote shutdown.
5. Battery Charge: Insert the USB charging cable with general mobile phone adapter,
we suggest to use 5v –1A charger. It takes around 2-3 hours for battery full charge.
2. SIM card installation method
1. Chip up insert the mobile phone card 2.Insert the SIM card into the card slot
3. Equipment parameters
Positioning:GPS satellite positioning+ BeiDou positioning+ AGPS auxiliary
positioning+ WIFI positioning+ LBS base station positioning
Positioning accuracy: GPS+BeiDou location 5-20m; WIFI location 20-100m;
LBS Base station location: 100-1000m.
Device size：53X41X15mm Whole machine weight：40G
Battery capacity：550mAh Standby time：1-2 days
Platform monitoring：Support android, apple mobile phone system, computer
network clients, etc.
Universal: support four frequency GSM network and WCDMA network, languages and
time zone setting, built in global network parameters
4. Product function
1.Real time tracking
2.Call function
3.Historical route query
4.Geo-fence
5.Voice monitoring
6.Do not disturb mode
7.Camera taking photos
8.Clock alarm
9.Health steps counting
10.Making friends
11.Watch settings
12.Other settings and functions
5. Function declaration
5.1 Real time tracking
There are three kinds of working mode. User can select setting in the phone APP software
function to choose the working mode.
1. Rapid positioning (1 minute): equipment at 1 minute intervals updates location
information, we don’t suggest choosing rapid positioning model, and the battery will
be lower soon than standard mode. We don’t suggest selecting this one.
2. Standard positioning (10 minutes): equipment updates location information
according to the time of 10 minutes interval. We suggest selecting this one.
3. Save electricity positioning (an hour): equipment in one hour time interval to
update location information, the power-saving mode use battery slowly.
5.2 Call function
（1）Setup whitelist :Click APP setting —whitelist —setting phone numbers
（Maximum 5 contact numbers can be set, only the phone numbers in whitelist can
call this watch）.
（2）Phonebook：Click APP setting—Phonebook—Setting name, phone numbers
（Maximum 5 contact numbers can be set in the phonebook；After setting up
phonebook, can choose one contact in phonebook to initiate a call through phone
Icon button of watch home screen）.
（3）SOS emergency call
If you have set up the family number (Maximum two), long press power/ SOS
button, watch will dial the family number, if the first number answers; it will not dial
the second number. If the first family number does not answer, it will dial the second
number automatically, circularly dial twice, will not call until answer.
Note：whitelist, phonebook and family number can be set in completed phone
number or short number.
5.3 Historical route query
This product will keep 3 months of route information. If two GPS position points are
very close to each other in the historical route data, this product will filtrate it.
5.4 Geo-fence
Users can choose Geo-fence function in the cell phone APP, you can set Geo-fence
round on the map, if the device is away from fences, and mobile phone APP client-side will
receive the alarm information from GPS locator platform. Alarm information frequency is
related to the positioning interval time setting, The smaller positioning time interval, the
more frequent alarm information can get.
5.5 Voice monitoring
APP settings—voice monitoring—fill in the monitor mobile phone number —click
ok(wait for a while and then the equipment will call to your mobile phone number; you can
listen to the voice around locator after pick up your mobile phone).
5.6 Do not disturb mode
APP settings—do not disturb mode—set up do not disturb timing(Maximum four groups
timing) within the time interval, unable to call the locating watch.
5.7Camera taking photos
You can choose either by APP or by GPS watch
(1) Entering APP settings interface, click “camera”button, and then the watch can
make remote camera control. In “picture view”, user can enlarge to view photographs and
time information of photo.
(2) Click the GPS watch “camera”function, can take photos or make video, can view
or delete the photos and videos in Gallery.
5.8 Clock alarm
APP alarm settings—alarm reminding —set clock alarm time (Alarm clock reminder
is divided into a once, daily and user-defined, can be set according to your own needs)
5.9 Wechat intercom (voice message talking)
Intercom between gps watch and app for voice conversations:
1- Send voice message from APP to GPS watch: APP voice—hold to talk—release to send
2- Send voice message from GPS watch to APP: click watch main interface, click the
voice icon—hold to talk—release to send.
3- Send picture from GPS watch to APP: in message chat interface, click“+”, then
take photos, and send photo to APP; user can check the photo in the “picture”of APP.
Note: the maximum voice message can be up to 15 seconds. User can swipe up finger
to cancel voice recording.
5.10 Health steps counting
Step counting is default to be closed, so you need to manually turn on this function, by
following steps in APP:
App health counting steps button —The upper- right corner setting icon—according to
your need to set time period of counting (three groups), pace and weight parameters,
finally turn on the step counter switch. You can turn off the counting function when it is not
needed.
You can check the steps number in the GPS watch “steps counting “; can check the
number of calories and steps number of the day or historical sport route in the APP .
5.11 Making friends
Click on "Friends" interface of watch, you can register your friend’s GPS watch ID when
two gps watches touch each other, contact will be created after success of register, icon will
be lighted up and display the ID of your friends. Click the buddy icon in the GPS watch, you
can send message to your friends, can send voice and pictures to your friend. Long press
messages sent by friends to "delete" or "delete all". Long press "the buddy icon", you can
remove friend.
5.12 Watch settings
(1) Wireless and network:
WLAN: open WLAN--search for WiFi hotspots-- enter the password.
Bluetooth: after turning on the Bluetooth, can transmit data such as photographs by
using Bluetooth.
(2) Equipment: display, storage, batteries, and applications.
(3) Personal: security, languages and input methods, and backing up and resetting
(4) System: Date and Time, about cell phones, and other relevance, shutdown, reboot.
Note: you can view a device's IMEI, and then get the device ID.
5.13 Other settings and functions
The watch also has many other features, user can operate and use by mobile APP.
6. Software client-side
6.1 Scan the following QR code to download software APP “AIBEILE” for cell phone.
APP for Android system APP for IOS system
6.2 For PC：http://en.i365gps.com/
6.3 For Android,
You can download the app from "Google play" by searching "AIBEILE"
For IPhone,
You can download the app from "app store" by searching "AIBEILE"
Note: during the APP installation process, it will ask you whether to trust this
program, or whether to allow access to mobile phone location, please choose
trust or allow.
6.4 Open the APP, choose login by ID, please input device ID number which you can find
on box (ten numbers), default passwords as 123456, finally click login to the main
menu.(you are suggested to change your password after your first login, and please
remember your new passwords)
Table des matières
