i3-TECHNOLOGIES i3TOUCH E1055 4K Manuel utilisateur
Interactive Touch Display
User’s Manual
i3TOUCH E1055 4K
i3TOUCH E1065 4K
i3TOUCH E1075 4K
i3TOUCH E1086 4K
11
14
15
Contents
Safety Warning & Statements
Connection and Setting
Menu Operation
Maintenance
Prepare to Install
Simple Troubleshooting
7
2
1
Safety Warning
Placement
Do not place the unit on an unstable cart, stand, tripod, bracket, table, or shelf.
Do not expose the unit to direct sunlight and other sources of heat.
Do not put the unit near appliances that generate magnetic fields.
Do not put any liquid near or on the unit, make sure do not spill any liquid inside the unit.
Do not put heavy objects on top of the unit.
Power Supply
Check that the unit’s operating voltage is identical with your local power supply.
Please unplug power supply and antenna plug when the weather is thunder-storm or lightning.
Please unplug power supply, when there is nobody home or the unit will be in idle for a long time.
Please keep power cable from physical or mechanical damage.
Please use the original power cable from the accessory bag, don't modify or lengthen it.
Please check and ensure AC source is connected with the ground.
This power cable comes with the device exclusively for this device only.
LED Screen
Never use any other hard or sharp object to replace the touch pen.
Unplug the power cable before cleaning.
Clean the screen with a soft, dustless and dry cloth.
Never use water or the spray type detergent to clean the unit.
For deep clean, please contact an authorized service center.
Better for the panel lifetime and the display performance, do not display high brightness image for long time.
Temperature
Do not place the unit near or over a radiator or a heater.
If your unit is suddenly moved from a cold to a warm place, please unplug the power cable and do not turn it on at least 2 hours,
making sure the moisture inside the unit is all evaporated.
Normal operating temperature is 0 ~ 40℃.
Humidity
Do not expose the unit in rain, or place in high humidity area.
Please make sure indoor environment is dry and cool.Normal operating humidity is 10%~90%RH.
Ventilation
Please put the unit in a well ventilated place, so the heating can be released easily.
Ensure that the unit has enough space for ventilation. Space requirement: left, right and back >10cm, top> 20cm.
Earphone
Using the earphone to listen loud sound for a long time might effect the hearing.
Before using earphone, please turn down the volume in advance.
Standby
It will enter standby mode but not turn off the unit after press the standby key.
Battery
Please make sure the battery get proper disposal or recycle after using.
Please keep the battery away from kids and don't throw the battery into fire.
Notes for Cleaning
There are vents on back cover, please do not use any liquid or spray directly during cleaning.
Power Switch Status Signs
“I” means power on, “O” means power off.
Notes for Maintenance
tive only. If there is inconsistency between the image and the actual
product, the actual product shall govern.
1. Control Panel
Prepare to Install
2
Installation Connecting and SettingMenu Operation TroubleshootingCare Maintenance
HOME button: back to main interface
Return button: return to previous level menu
Menu button: call up function menu
Volume down button: turn down volume
Volume up button: turn up volume
Items Function description
Tap to enter EnergySaving function
Press at least 2 seconds to enter standby mode
2. Terminal Interface
3
Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance
Items Function description
Connect USB devices such as mobile hard disk, U disk, USB keyboard
and mouse, USB drives, etc.
External computer audio input
External computer image input
Touch signal output to the external computer
Composite video and audio input
Coaxial output
Connecting RJ45 terminals
Serial interface, used for mutual transfer of data between devices
AC power input, connecting AC power supply
LAN
USB
HDMI IN
AUDIO IN
VGA IN
TOUCH
AV IN
COAX OUT
RS232
To open or shut down AC power supply. “ I ” means power on, “ O ”
means power off
13
12
11
10
9
8
7
6
5
4
3
2
1
AC IN
High-definition multimedia interface signal input, connect to PC with
HDMI output, set-top box, or other video device
LAN
5 63
4
12337 4 2
28 9 10 11 12 13 14
HDMI OUT Connected to the devices with HDMI input function
DP Connected to devices with DisplayPort output function
AUDIO OUT Audio output to the external speaker
14
AC SWITCH
3. Remote Control
4
Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance
1) Remote control button instruction
Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance
Detailed Function Description
Power on/off
:
Mute switch
Built-in computer Windows key
Built-in computer Space key
Built-in computer spacebar Alt + Tab
Built-in computer program window close button
Numeric keys:Numeric input keys
Display channel information
Input signal source selection key, choose different sourced according to need
Android system main screen button
Setting menu button, press this button to pop up
Lock and unlock Buttons and Touch function
Lock and unlock Buttons function
Lock and unlock Touch function
Freeze and zoom
:
:
:
:
:
:
:
One key for blank screen
Backspace key
Direction key, press this button for upwards selection
Direction key, press this button for left selection
Direction key, press this button for right selection
Direction key, press this button for downwards selection
Confirmation key, press this key to confirm selection state
Quickly start writing software
Return key
Built-in computer page (previous page)
Built-in computer page (next page)
Volume switch key
Built-in computer F1 - F12 function keys
NOTE: In case of no built-in computer, all function keys related with computer are regarded as no operating functions.
: Function button
Display:
Input:
Home:
Menu:
Red:
Green:
Yellow:
Blue:
Enter:
Back:
PgUp:
PgDn:
CH.+ \ CH-.:
VOL+ \ VOL-:
F1-F12:
Function button
:
Alt+Tab
:
Space
:
:
:
Alt+F4
Install Batteries
(1) Open back cover of battery component on the back of remote control
(2) Install AAA type battery according to the corresponding electrode, make sure battery positive and negative pole
are correct ("+"to"+", "-" to "-"), please do not mix using old and new batteries
(3) After battery is installed, close the back cover of battery components, and make the following clip buckled to the
bottom
Range of remote control
2) Remote Control Instruction
Remote control can work normally within the range of 8 meters distance,
30 degrees left and right from the remotecontrol receiver; in order to protect
environment, please dispose waste battery into recycling box.
6
Installation Connecting and SettingMenu Operation TroubleshootingCare Maintenance
If the batttery is replaced by an incorrect type, it may lead to explosion.
Connection and Setting
For the safety of you and the machine, please do not connect any power plug before connection.
1. External Computer and Touch Connection
NOTE:
External computer input, equipment's best resolution is 1920 x1080
External computer can also connect to the equipment through the HDMI cable
Recommended computer configuration:
2.0GHz Processor, 1GB Memory More than 256 color display card
1GB Available Hard Drive
VGA-OUT/HDMI-OUT、Audio-OUT、USB Interface
Support Resolution 800*600,1024*768,1920*1080
Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance
(1) Use VGA cable to connect to VGA output port of external computer, and meanwhile use headphone audio cable to
connect to external computer audio output interface
(2) Use USB cable to connect to external computer USB port
(3) After cable connection, plug in power cord,and switch power on
(4) Start external computer
(5) Press key, and the equipment is power on
(6) Press the INPUT key to switch to VGA channel
Audio Cable VGA Cable
USB Cable
Computer
8
Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance
Video Game Set-top
Satellite TV receiver
Video recorder
Camera
DVD
AV Cable
2. Audio and Video Equipment
(1) Use AV audio and video cables to connect audio and video equipments with AV output (yellow for video, red
for right sound channel, and white for left sound channel)
(2) After cable connection, plug in power cord, and switch power on
(3) Press to turn equipment on
(4) Press INPUT key to switch to AV port
HDMI Cable
DVD Disc Player
(1) Use HDMI cable to connect audio and video equipment with HDMI output
(2) After cable connection, plug in power cord, and switch power on
(3) Press to turn equipment on
(4) Press INPUT key to switch to HDMI port
1) AV IN
2) HDMI
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels i3-TECHNOLOGIES Écran tactile
Manuels Écran tactile populaires d'autres marques
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manuel utilisateur
YASKAWA
YASKAWA TP 610C Manuel utilisateur
B&R
B&R Power Panel C Series Manuel utilisateur
Beijer Electronics
Beijer Electronics X2 control Manuel utilisateur
AXIOMTEK
AXIOMTEK GOT321W-521 Manuel utilisateur
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manuel utilisateur
