I.Trek M7 Manuel utilisateur
i.Trek M7 Bluetooth GPS Receiver
User’s Manual
Published on Jan. 3rd, 2008
1
Table of Contents
Chapter 1 Before you begin..................................................3
1.1 Appearance .............................................................. 4
1.2 Checking the package content ..................................5
Chapter 2 Getting started.....................................................6
Step 1 Charging Your Battery ......................................... 6
Step 2 Turn on the power switch (NAV/ USB).................7
Step 3 Connecting your handheld device with i.Trek M7..7
Step 4 Load your GPS mapping or routing software ...... 10
Step 5 Start the application .......................................... 10
Chapter 3 How to configure your GPS Receiver ?................ 11
3.1 USB driver Installation............................................ 11
3.2 GpsView software................................................... 11
3.2.1 Connect USB cable between GPS and laptop... 11
3.2.2 Executing GpsView Program......................... 11
Appendix B. Fuzzy Auto On/Off.......................................... 14
Appendix C. Specification................................................... 14
Appendix D. Frequently Asked Questions ........................... 17
Appendix E. How to change battery.................................... 18
Appendix F. Helpful tips ..................................................... 19
Appendix G. Certification.................................................... 20
Appendix H. Warranty and Support Information................. 22
2
Note and Warning
- i.Trek M7 uses Lithium battery. If i.Trek M7 is used in temperature lower than
-10℃or higher than 60℃, its battery charging capability will decrease. Please
leave the i.Trek M7 far from heat or high temperature environment. In addition,
do not expose your i.Trek M7 in temperature higher than 140℉/60℃. If you do
not follow these rules, the battery inside i.Trek M7 may become heat, explode or
burn itself, and this will lead to very serious damage. The Lithium battery inside
the i.Trek M7 should be recycled.
- While in the hospital, turning off the i.Trek M7 is recommended. Like other
common equipments do, wireless GPS receiver may also affect these medical
equipments which use radio frequency and make these equipments malfunction.
- For a long period not using i.Trek M7, take out the battery and store it in dry/cool
places.
- For safety, keep the i.Trek M7 and all accessories out of small children’s reach.
- We assume no responsibility for any damages and loss resulting from the use of
this manual and also by deletion of data as a result of malfunction, dead battery,
or misuse of the product in any way.
- Use only the supplied and approved accessories. Unauthorized accessories,
antenna, modifications or attachments could damage the i.Trek M7, and may
violate regulations governing radio devices.
- Use a dry, clean soft cloth to clean the unit. Do not use harsh cleaning solvents,
chemicals, or strong detergents.
- Do not attempt to open the i.Trek M7 yourself. Unauthorized hacking may
damage the unit, and void your warranty.
3
Chapter 1 Before you begin
Thank you for purchasing the Bluetooth GPS Receiver, i.Trek M7, a
global positioning system receiver with Bluetooth wireless technology.
i.Trek M7 is well suited to system integrations including PDA, smart
phone, Tablet PC and Notebook PC with Bluetooth devices. It can
satisfy a wide variety of applications such as PDA and smart phone
navigation, automotive vehicle tracking, personal positioning and
sporting. With the dimension of 72.2(L) x 46.5(W) x 20(H) mm and
weight only 64.7g (w/ battery), i.Trek M7 is an ideal solution to carry
along everywhere.
i.Trek M7’s rechargeable battery can save satellite information such as
the status of the satellite signal, most recent location and the data and
time of its last use. The low-power design has extended the operation
time up to 15 hours and brought you the most convenient and longest
usage of its kind. With the lead-free production process (starting Jan.
1, 2006), i.Trek M7 is the most environmentally friendly wireless GPS
receiver in the market.
i.Trek M7 has distinguished features others don't have. With our
patent pending Smart Power Save Mechanism and Fuzzy Auto
On/Off features, i.Trek M7 consumes 65% less power than other
wireless GPS receivers, and can extend the operating time up to 15
hours.
Patent Number:
94143224
94143221
4
1.1 Appearance
1. Power jack (mini USB type)
2. Mode switch (Power off/ Navigation (Bluetooth)/ USB)
3. Battery status LED (red/green)
4. Bluetooth status LED (blue)
5. GPS status LED (orange)
6. Internal antenna
5
1.2 Checking the package content
Congratulations on your purchase of the i.Trek M7 with built-in
Lithium rechargeable battery. Before you start using i.Trek M7, please
make sure if your package includes the following items. If any item is
damaged or missing, please contact your dealer at once.
- Bluetooth GPS Receiver x 1
- USB Cable x 1
- Car Charger x 1
- Lithium rechargeable battery x 1
- User’s manual with Warranty Card x 1
*Unit package contents may vary depending on countries without
prior notice.
6
Chapter 2 Getting started
Please follow the procedure step by step.
Step 1 Charging Your Battery
For the 1st time you use the i.Trek M7, please charge battery until it is
full (the LED blinks). Take the power cable and connect it to the power
jack (mini USB type). This will begin to charge the battery. The LED
that represents the battery is the right-most battery icon (shown in
below).
- If the LED is red, that means battery power is critically low. Charge
immediately.
- If the LED is green, that means battery is charging now.
- If the LED is blinking, that means battery is fully charged.
- When you plug into the mini USB cable to charge your unit, it will takes 5~10
seconds then you can see the green LED turning on.
7
Step 2 Turn on the power switch NAV (Bluetooth)/ USB/OFF
Power off Navigation (Bluetooth) USB
Step 3 Connecting your handheld device with i.Trek M7
Please refer to the user manual of PDA to enable the Bluetooth
connectivity. If the connection between your device and i.Trek M7 is
successful, the blue LED of i.Trek M7 will be blinking.
Below, we provide a common procedure of software installation to set
up your PDA. (For other PDA, the steps may be a little bit different.
Bluetooth Manager is one of popular program used for Bluetooth
device.)
8
-->
Start -> Bluetooth Manager New
1. Open “Bluetooth Manager” on pocket pc, and establish new
connection.
-->
Explore A Bluetooth device
->Next Tap iBT-GPS
9
2. Explore a Bluetooth device, and find the “iBT-GPS”
Passkey 0000 (if your PDA ask
for the passkey)
3. (Optional)
-->
Select SPP slave->Next Finish
Table des matières
Autres manuels I.Trek GPS
