I-MOBIL S.A. SecureCam SG-88 Manuel utilisateur

i-Mobil SecureCam

Model number SG-88

User guide

Important

You may not use SecureCam:

•to spy on people

•watch people without their consent

•for illegal or immoral activities

Using SecureCam for any of the above may be a criminal offence and could lead to fines and/or imprisonment.

i-Mobil accepts no liability for your actions or activities carried out using SecureCam. If your mobile phone operator becomes aware that

you are using SecureCam for an illegal or immoral purpose it may terminate your contract and refer the matter to the law enforcement

agencies for investigation.

Contents

1Getting to know your SecureCam.........................................3

1.1 Overview.................................................................................3

1.2 Technical specifications..........................................................3

1.3 Environmental conditions.......................................................3

1.4 Getting to know your SecureCam...........................................3

1.5 Getting started.........................................................................4

1.5.1 The USIM card....................................................................4

1.5.2 T-FLASH Memory Card.....................................................4

1.5.3 Battery.................................................................................5

1.5.4 Charging the battery............................................................5

1.5.5 Understanding indicators.....................................................5

1.6 Power on/off............................................................................5

1.7 Fixing the SecureCam onto the ceiling ...................................6

2SecureCam administration....................................................6

2.1 SecureCam’s own phone number............................................6

2.2 Setting administrator (AD) number.........................................6

2.3 Setting other user numbers......................................................6

2.4 User entry................................................................................7

3SecureCam whitelist.............................................................7

4Control the SecureCam by 3G video phone..........................7

4.1 Camera adjustment..................................................................7

4.2 Adjusting speaker volume.......................................................7

5SecureCam administrator main menu ..................................8

5.1 Selecting your default Language.............................................8

5.2 Video call: Main menu operation............................................8

5.2.1 Adding users........................................................................8

5.2.2 Deleting user .......................................................................8

5.2.3 Changing PIN code .....................................................8

5.2.4 Changing administrator number..................................9

5.2.5 Video recording...........................................................9

5.3 SecureCam SMS commands.................................................10

6SecureCam operational modes...........................................11

7Warning and precautions ....................................................11

7.1 Precautions............................................................................11

7.2 Aircraft safety........................................................................12

7.3 Precautions for medical SecureCams and facilities...............12

7.4 General safety........................................................................12

7.5 Road safety............................................................................12

7.6 Vehicles equipped with an air bag.........................................12

7.7 Third-party equipment ..........................................................12

7.8 Radio frequency energy ........................................................12

7.9 Limit of warranty ..................................................................12

Thank you for choosing the SecureCam

To guarantee the SecureCam is always in best condition, please read this manual carefully and store

safely for future use.

1Getting to know your SecureCam

1.1 Overview

Using the latest 3G technology, the SecureCam is capable of receiving 3G video calls automatically. Users can dial the number of the SecureCam

from any 3G Mobile Phone that supports video calls to view real-time video and audio captured by the SecureCam.

1.2 Technical specifications

Type SecureCam

Dimensions（W×L×H）105mm×85mm×112mm

Weight 263g (with integrated battery)

Camera 0.3 megapixel (solar/infrared dual mode)

Battery

Continuous standby time 120-200 hours

Recording time (in sunlight environment) 7-12 hours

Recording time (in infrared environment) 3-5 hours

Video communication time (in sunlight environment) 2-3 hours

Video communication time (in infrared environment) 1.6-2.6 hours

Charging time 5 hours

1.3 Environmental conditions

The SecureCam is meant to be used indoors under the following environmental conditions:

Working temperature range: －10°C～45°C

Relative humidity: 5％～95％（without dew）

Power supply: 220V AC supply, integrated spare battery

1.4 Getting to know your SecureCam

Front view of your SecureCam

1.Camera 2.Power indicator 3.Signal indicator

4.Infrared spotlight 5.Infrared sensor 6.MIC

Camera: The camera can rotate upward at an angle up to about 40 degrees, downward at an angle up to about 5 degrees, and left and right at an

angle up to about 45 degrees.

Power indicator: Indicates the level of charge in your battery. There are five colors: white, blue, cyan, green and red.

Signal indicator: Indicates local network signal strength. There are two colors: red and green.

Infrared spotlight：The infrared spotlight will start up automatically in low light conditions

Infrared sensitive light：This senses daylight intensity. When light conditions are optimal, the infrared spotlight will switch off and the SecureCam will

switch to daylight working mode.

MIC: An integrated microphone for picking up audio.

Back view of your SecureCam

1. SIM/USIM card slot 2. T-Flash card slot 3. Reset

4. Power 5. Clear 6. Speaker 7. Charger Connector

On the back of the SecureCam. There are 3 slots, for the SIM/USIM, T-Flash Card and charger. Please refer to 1.5.1, 1.5.2 and 1.5.4 respectively for

details. There are also 3 buttons:

zRESET button：Resets the SecureCam to the default factory settings. The white list will not be cleared.

zClear button：Clears all saved numbers in the white list except administrator number.

zPOWER button：For turning the SecureCam on/off.

1.5 Getting started

Please ensure that you have read the user guide thoroughly and have familiarised yourself with the SecureCam before attempting to operate it.

Follow the steps below to begin using your SecureCam:

zStep 1: Insert your USIM Card into the SIM Card slot.

zStep 2: Press the Power Button to switch on the SecureCam ¹

zStep 3: Make a video call to the SecureCam to set yourself as the administrator of the SecureCam

zStep 4: Once the video call is connected, enter the default PIN code: 0000 to begin viewing the live video stream

zStep 5: Press the “0” key to change your PIN code from the sub menu

NOTE:

1. The battery should be fully charged before using the SecureCam.

2. The SecureCam can also be configured using SMS commands. For further details on the SMS commands, please refer to chapter 4.2

1.5.1 The USIM card

Be sure to insert your USIM card before you use the SecureCam.

Inserting the SIM card

1. Make sure your charger is disconnected, then press and hold down the power button until the SecureCam is powered off.

2. Open the SIM cover in order to insert the SIM card.

3. Insert the SIM card, with the copper contacts surface facing downward until you hear the SIM card click into place.

4. Insert the plastic plug back into the SIM card to prevent dust from accumulating.

Removing the SIM card

1. Make sure your charger is disconnected, then press and hold down the power key until the SecureCam is powered off.

2. Pull out the SIM cover inserted in the SIM card slot.

3. Press the SIM card until you hear a click. The SIM card will pop up and can be removed.

Note:

Make sure to disconnect the power from your SecureCam before inserting and removing your SIM card.

1.5.2 T-FLASH Memory Card

The T-FLASH memory card is used to save a recorded video clips.

Inserting the T-Flash memory card

1. Make sure your charger is disconnected, then press and hold down the power button until the SecureCam is powered off.

2. Open the T-Flash memory card cover in order to insert the T-Flash memory card.

3. Insert the T-Flash memory card, with the copper contacts surface facing downward until you hear the T-Flash memory card click into place .

4. Insert the plastic plug back into the T-Flash memory card slot to prevent dust from accumulating.

Removing the T-Flash memory card

1. Make sure your charger is disconnected, then press and hold down the power key until the SecureCam is powered off.

2. Pull out the T-Flash memory card cover inserted in the T-Flash memory card slot.

3. Press the T-Flash memory card until you hear a click. The T-Flash memory card will pop up and can be removed.

Note:

Make sure to disconnect the power from your SecureCam before inserting and removing your T-Flash memory card.

1.5.3 Battery

Your SecureCam is equipped with a Lithium ion battery. Please charge the battery fully before using the SecureCam for the first time. The battery can

be recharged even while the SecureCam is on. Recharging the SecureCam which on will not affect its operation.

The SecureCam will switch off automatically when the battery is low.

1.5.4 Charging the battery

1 Connect the AC power adapter to the power adapter connector

2. Plug the 3-PIN plug into the mains socket

3 When charging is complete, disconnect the AC power adapter from the mains electricity and remove the AC power adapter connector.

4. The battery indicator light will turn from blue to green when the battery is fully charged.

Note：

Charging time may be longer when the SecureCam is powered on.

Use only the I-MOBIL-provided AC adapter with the SecureCam. Using unauthorized chargers may be dangerous and may violate the

authorization and warranty of the SecureCam.

The power indicator light will blink fast in red when the battery is exhausted. Please charge the battery immediately.

1.5.5 Understanding indicators

The SecureCam has two indicators on the front panel – one for the level of charge in your battery and the other for local network signal strength

Signal indicator：Indicates local network signal strength.

Detail Description

Red ( flash) No network strength or low network strength

Green ( flash) Normal network strength

Power indicator：Indicates the level of charge in your battery.

Detail Description

White (normal) Power on

Cyan（normal）No SIM card or invalid SIM card

Blue (normal) Charging when powered off

Blue (flash) Charging when powered on

Green (normal) Charging finished when powered off

Green (5 second interval) Sufficient power

Red (5 second interval) Low power (less than 15% of the total battery

level)

Red (2 second interval) Weak power ( less than 10% of the total battery

level and no charging)

1.6 Power on/off

Power on

1 Ensure that your USIM card has been inserted and the battery is fully charged.

2 Press and hold down power button until the indicator light on the front panel turns from white to green..

Power off

Press and hold down the power button (hold for about 3 seconds) until the light on the front panel is turned off.

1.7 Fixing the SecureCam onto the ceiling

The figures below show how the SecureCam may be fixed onto the ceiling:

You can use three screws (screw 1) to connect the bracket and body of the SecureCam firmly.

1. Then you can use two screws (screw 2) to fix the bracket firmly onto the ceiling.

1.Body 2.Brocket 3.Screw1 4.Screw2 5. Ceiling

2SecureCam administration

2.1 SecureCam’s own phone number

The USIM card in the SecureCam has its own mobile phone number. It is advisable for you to store this in your phonebook.

2.2 Setting administrator (AD) number

The first legitimate user to call the SecureCam is administrator. First, confirm the administrator phone number and make a video call to the

SecureCam using this number.

Next, after the call connects, the administrator will be prompted to choose the language and enter user PIN code (the default PIN code is 0000) and

end by pressing * key.

If 3 consecutive incorrect PIN code entries are made or if you have not been able to enter the PIN code within 60 seconds, the SecureCam will be

disconnected automatically. If the PIN code is valid, the administrator will be able to view the live video stream.

Note:

Once you set the the administrator number on the SecureCam, you can check or revise the time by SMS. For further details on SMS commands,

please refer to chapter 4.1 and 4.2.

The administrator number should be set in HOME COUNTRY OF THE MOBILE PHONE. This number will be your mobile phone number. An attempt

to set the number from outside the HOME COUNTRY OF THE MOBILE PHONE using a mobile roaming or IDD service will result in an invalid number

being saved in the white list.

2.3 Setting other user numbers

In addition to the the administrator other phone numbers can also be added to the SecureCam white list. This can be done by making a video call to

the SecureCam with the correct PIN code.

A “beep” sound from the SecureCam indicates that the call has been successfully connected. If 3 consecutive incorrect PIN code entries are made or

if you have not been able to enter the PIN code within 60 seconds, the SecureCam will be disconnected automatically. If the PIN code is valid, the user

will be able to view the live video stream.

The the administrator can also set the mobile phone numbers of other users via the video phone menu or SMS commands. (See chapter 4.1, 4.2)

2.4 User entry

White list user: Phone numbers added to white list (including the administrator number). Users on the white list user can make a video call to the

SecureCam without entering a PIN (this function depends on the administrator setting)

Non-white list user: If the white list is not full and a user makes a video call to the SecureCam with a correct PIN code, the caller’s phone number will

be added to the white list automatically. If the number of phone numbers in the white list has reached 20, the SecureCam will refuse to accept any

more users on the white list. (this function depends on the administrator setting)

3SecureCam white list

If an incoming call does not match the mobile number on the white list:

1) A white list user calling from outside the HOME COUNTRY OF THE MOBILE PHONE will not display his/her number and will be prompted to enter

his or her own HOME COUNTRY OF THE MOBILE PHONE number. If that number is on the white list, the user can access the video stream after

entering the PIN code correctly.

2) If the white list is not full, a user calling the SecureCam will be prompted to input a PIN code. After entering the correct PIN code, the users mobile

number will be added to the white list automatically.

3) If the white list is full, a user calling the SecureCam will be prompted to input a phone number for verification. If that number already exists on the

white list, a PIN code will be requested. If the telephone number entered is not on the white list, the call will be terminated.

4.) When the number is not in the white list, or 3 consecutive incorrect PIN codes have been entered, the call will be terminated automatically.

4Control the SecureCam by 3G video phone

4.1 Camera adjustment

By making a video call to the SecureCam, any user on the white list can adjust the camera angle, brightness and zoom. Rotate the camera right/ left

45°, upward 40° , downward 5° and control 3X digital zoom by pressing one of the following keys on the mobile phone:

Press “4” key to rotate the camera to the left

Press “6” key to rotate the camera to the right

Press “2” key to rotate the camera up

Press “8” key to rotate the camera down

Press “7” key to reduce camera brightness.

Press “9” key to increase camera brightness.

Press “1” key to zoom-out

Press “3” key to zoom-in

Press “5” key to invert the screen by 180 degrees

4.2 Adjusting speaker volume

During a video call to the SecureCam, the volume can be adjusted by pressing “#”key and “*” key. Hold “#” key to increase volume. Hold “*” key to

decrease volume .

Note:

The speaker will be muted by default during a video call.

5SecureCam administrator main menu

The first person to dial the SecureCam successfully becomes the administrator. The administrator is able to operate the SecureCam during a video

call or via SMS commands.

5.1 Selecting your default Language

When you make the first video call, you can select either English or Arabic as the default language for the SecureCam. During the video call,

press 1 to choose English or 2 to choose Arabic.

5.2 Video call: Main menu operation

When the video call has been connected, press “0” to enter the main menu. Follow the on-screen instructions to add users, delete users, change

PIN code and administrator number and record video

5.2.1 Adding users

ÎÎ

When in main menu, press “1” to enter the “Add User” screen. Enter the phone number of the new user, and end by pressing “*” key. Press the “*” key

again to confirm the operation, press “#” key to cancel the operation and to go back to main menu.

5.2.2 Deleting user

ÎÎ

In main menu, press “2” to enter the “Delete user” screen. Press the “*” key to go to the next page. Select the serial number, for the phone number

which you want to delete. Press the “*” key for confirmation, press “#”key to cancel the operation and to go back to main menu.

5.2.3 Changing PIN code

ÎÎÎ

In main menu, press “3” to enter the “Change PIN” screen. Enter the current PIN code and end with “*” key, then enter the new code and end with “*”

key. Press “*” for confirmation.

If an incorrect PIN is entered, press the “#” key to go back to main menu.

5.2.4 Changing Administrator number

ÎÎ

In main menu, press “4” to enter the “Change Administrator” screen. Enter the new administrator phone number and end by pressing the “*” key. Press

the “#” key to cancel operation and to go back to main menu .

5.2.5 Video Recording

ÎÎ

In main menu, press “5” to enter the “Video Recording” screen. You will be able to see the available memory and recording time available on T-flash

memory card. After entering the duration of the recording session, the SecureCam will end the ongoing video call and enter video-recording mode.

The recorded file will be saved on the T-Flash memory card and be labelled as yyyymmddhhmm_xx.3gp (yyyymmddhhmm represents year, month,

day, hour and minute, e.g. 200605011230 stands for 12:30 May 1, 2006. XX refers to the serial number, such as 00, 01 and so on).

The maximum recorded video file size is 3 hours, which can be divided into several files And is dependant on the storage available on the memory

card.

Note:

Video-recording is not possible if there is no T-flash memory card in the SecureCam.

5.3 SecureCam SMS commands

The administrator can also administer the SecureCam by sending SMS commands. Some functions can only be operated by SMS commands – e.g.

time setting and BEEP switch setting.

Command SMS COMMAND

Adding a new user #adduser*[number]#[pin]#

Deleting a user #deluser*[number]#[pin]#

Modifying user PIN code #modpin*[newpin]#[pin]#

Modifying administrator number #modad*[oldnumber]*[newnumber]#[pin]#

Setting the language

#setlanguage*[en|sp]#[pin]#

The default is English.

en—English

sp—Spanish

Getting white name list #getwl#[pin]#

BEEP on/off when video call is

connected

#beep*on|off#[pin]#

Default is “on”

Help help

A list of available SMS commands will be

sent to the Administrator, through multiple

SMS messages.

Setting time #settime*[yyyymmddhhmm]#[pin]#

Getting time #gettime#[pin]#

Setting the switch to control

whether user needs to input PIN

code every time

#pin*on|off#[pin]#

The default is “off”.

If the command is set as “on”, the caller

has to input the PIN code every time,

whether his number is in the white list or

not.

If the command is set as “off” and the

caller’s number is in the white list, he does

not need to input the PIN code.

Setting the switch of infrared mode #nightmode*on|off#[pin]#

The default is “on”.

Setting the switch of the led

indicators #led*on|off#[pin]#

The default is “on”.

Setting the validation of non-white

list user #owner*on|off#[pin]#

The default is “on”.

If the command is set as “on”, the

SecureCam will prompt the user to input

his number for authentication purposes:

1. the incoming call doesn’t carry a caller

ID number (may be the caller is

roaming or the caller disables caller

ID), or

2. the incoming number exceeds 20

digits, or

3. the white list reaches its limit of 20

users and the incoming number isn’t in

the white list.

If the entered number is in the white list,

then the user will be further prompted for

the PIN and video call will proceed if the

PIN is correct. If the number is not in the

white list or the PIN has been entered

incorrectly 3 times, the call will be

Table des matières

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur

i-MOBIL S.A. SecureCam SG-88 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques