I-Flash P2DV Series Manuel utilisateur

1 | P a g e

Pulse P2DV Series

User Manual

Pulse IP Camera User Manual

Model Number: P2DV Series

Revision: 3.0.1.2

2 | P a g e

Pulse P2DV Series

User Manual

Safety Instruction

These instructions are intended to assist users ith the operation of the P2DV and also to instruct on

ho to avoid dangerous situations or damage to the device.

Warnings: Serious injury or death may be caused if any of the arnings belo are neglected.

Cautions: Injury or damage to the equipment may occur if any of the follo ing caution

messages are neglected.

Warnings

Follow these safeguards

to prevent serious injury or death.

Cautions

Follow these precautions

to prevent potential injury or material

damage.

Warnings:

Input voltage should meet both the SELV (Safety Extra Low Voltage) and

the Limited Power Source with DC 12V according to the IEC60950-1

standard. Please refer to the technical specifications for more details.

Do not use a third-party power adapter or power cord

When the device is installed on the wall or ceiling, make sure that it is

firmly attached.

3 | P a g e

Pulse P2DV Series

User Manual

Notice：

•Make sure that the power supply voltage is correct before using the camera.

•Do not drop the device or expose it to physical shock.

•Do not expose the device to temperatures outside the range of -10 °C to +50°C

when the device is in operation.

•Do not expose the device to damp/wet conditions or high electromagnetism

radiation.

•To avoid heat accumulation, make sure that your operating environment has

proper ventilation.

•Do not attempt to open, disassemble, or modify the device

•

A few parts (e.g. electrolytic capacitor) of the equipment shall be replaced

regularly according to their average life time. The average life time varies from

the differences between operating environments and usage history. Regular

maintenance checks are recommended for all users. Please contact your dealer

for more details.

4 | P a g e

Pulse P2DV Series

User Manual

Contents

Welcome …………………………………………………………………………………………………………………

Package Contents ………………………………………………………………………………………………… 6

Product Overview ………………………………………………………………………………………………… 7

Configuring the P2DV via Web Browser ……………………………………………………… 10

Access P2DV Web Configuration Menu ……………………………………………… 10

Connect The Camera to DHCP server …………………………………………………………… 10

Connect to the Camera using Static IP …………………………………………………………… 11

Home Web Page …………………………………………………………………………………………… 12

System Page ………………………………………………………………………………………………… 14

Video & Audio Page …………………………………………………………………………………….. 1

Networking Page…………………………………………………………………………………………… 16

DDNS Page……………………………………………………………………………………………………. 19

SIP Page…………………………………………………………………………………………………………. 21

Status Page ………………………………………………………………………………………………….. 23

User Management Page ………………………………………………………………………………….. 2

Maintenance Page ………………………………………………………………………………………… 26

SMTP Page ……………………………………………………………………………………………………. 27

FTP Page ………………………………………………………………………………………………………. 28

Alarm HTTP Server Setting……………………………………………………………………………. 29

Motion Detection Page ………………………………………………………………………………… 30

System Log …………………………………………………………………………………………………… 32

5 | P a g e

Pulse P2DV Series

User Manual

Welcome

The

P2DV

is a next generation mini IP dome camera for remote monitoring and

surveillance over your LAN or internet.

The

P2DV

combines best in class IP video technology and SIP protocols for a robust IP

surveillance solution. The product features H.264 video streams ith up to 30 frames per

second in full D1, delivering rich image clarity at rapid transmission rates. Integrated SIP can

pass alarms to the PSTN, mobile phones, SIP IP phones, SIP videophones and enables

2- ay VoIP communication.

The

P2DV

ensures ease of use, integration and deployment ith a multilingual graphical

user interface. The

P2DV

can be quickly installed and connected to your net ork and

accessed from any here over the internet. i-Flash Technology flexible video management

soft are enables users to monitor multiple environments in one easy to use application. The

intuitive eb interface lets users easily access, manage, vie and record live video streams

from the device.

The

P2DV

is a po erful solution for small to medium sized offices, homes and storage

facilities looking to safeguard their valuables.

6 | P a g e

Pulse P2DV Series

User Manual

Package Contents

Items in the package:

•P2DV IP Camera

•Quick Installation Guide and Soft are CD

P2DV IP Camera

Quick Installation Guide

and Soft are CD

7 | P a g e

Pulse P2DV Series

User Manual

Product Overvie

P2DV Camera

Connectors and Cables

Network: 10/100 S itch LAN Port for connecting to Ethernet

Power – 12V DC Po er Jack

Reset Button – Reset the Camera

Connectors and Cables (With Audio)

Audio: Audio Input

Network: 10/100 S itch LAN Port for connecting to

Ethernet

Power – 12V DC Po er Jack

Reset Button – Reset the Camera

8 | P a g e

Pulse P2DV Series

User Manual

P2DV Key Features

Video Compression H.264 HP、JPEG, Motion JPEG

Image Sensor 1/3.2”, 2-Megapixel CMOS, 1,600Hx1,200V

Lens 1/3", M12 MEGA, f=3.6 mm, F=1.8 (Selectable）

Day/Night IR Light and IR-CUT control (Optional)

Min. illumination 0.5Lux

Min. illumination Response 1.0V/lux-sec (550nm)

Max Video Resolution 1600x1200

Max Frame Rate 6 fps 1600x 1200, 25fps at 1280x720, 30fps at

800x460, 640x360, 480x270, 320x180 and 240x135

Pixel Dynamic Range 71dB, ith ( SNRMAX = 42.3dB)

Video Output NTSC or PAL Complex video signal

Frame Rate 10-30fps

Video Compression Type Video Stream / Complex Video Stream

Compressed Video Output rate 16Kbps - 2Mbps

Audio Input MIC IN (optional)

Audio Output Linear output (LINEOUT，600Ω, Optional)

Audio Compression Standard G.711

Audio Compression Rate 16-96kbps，support8-16KHz

Net ork Connection RJ45 10M/100M Ethernet

Po er 12VDC or PoE ith Splitter

Operation Temperature -10°C – 45°C

Operation Humidity 10–90%（non-condensing）

Dimension 107 mm diameter

Weight ~ 450g

9 | P a g e

Pulse P2DV Series

User Manual

Installation Guide

Minimum Recommended System Requirement

• Windo s 2000 Server Professional, Windo s XP, Windo s Vista, Windo s 7

• CPU: Intel Pentium 4 or higher, 2 GHz.

• RAM: 1 GB (4 GB recommended for larger systems).

• Support for DirectX 8.0 and above.

Connect your P2DV

Using the Po er adapter as po er supply

• Connect an RJ-45 cable to the NETWORK port of the P2DV.

• Connect the other end of the RJ-45 cable to your net ork or PC.

• Connect the po er supply to the DC 12V po er jack on the back of the P2DV.

• Connect the other end of the po er supply ith 12VDC 1A minimum to a all outlet (not included)

Using PoE as power supply with PoE Splitter (not included in Package):

• Connect an RJ-45 to the NETWORK port of P2DV.

• Connect the other end of the RJ-45 cable to a PoE s itch.

NOTE: If you are going to connect the device to a hub/s itch/router, please use a straight-through cable.

A cross over cable should be used if you are going to connect the device directly to a PC.

10 | P a g e

Pulse P2DV Series

User Manual

Configuring the P2DV via Web Browser

The P2DV’s embedded Web server responds to HTTP/HTTPS GET/POST requests.

Embedded HTML pages allo you to configure your IP camera through Microsoft Internet Explorer.

Access P2DV Web Configuration Menu

Connect the Camera to DHCP server.

1. Run the Search tool provided in Soft are CD

2. Click on button in order to begin device detection

3. The detected devices ill appear in the Output field

4. Start Internet Explorer on your computer

5. Enter device IP in the address bar of the bro ser or double click the camera in Search tool

6. Enter the administrator user name and pass ord to access the Web Configuration Interface

7. The default user name and pass ord are both set to admin.

8. IE ill indicate that “This ebsite ants to install the follo ing add-on:

9. Install this add-on by follo ing the instructions in IE.

10. You ill see the home page.

Table des matières

Autres manuels i-Flash Caméra IP

i-Flash

i-Flash P2DS Series Manuel utilisateur

i-Flash

i-Flash P2DIR Manuel utilisateur

i-Flash

i-Flash DSM2V Series Manuel utilisateur

Manuels Caméra IP populaires d'autres marques

FLIR

FLIR Exx series Manuel utilisateur

Avigilon

Avigilon H4A-BO1-IR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuel utilisateur

ShareTech

ShareTech AV1 Manuel utilisateur

Ezviz

Ezviz C6C Manuel utilisateur

Melchioni

Melchioni UCAM 2015 Manuel utilisateur

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuel utilisateur

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuel utilisateur

Mitel

Mitel 6800i Series Manuel de service

Vitek

Vitek VTC-IR403-212NP Manuel utilisateur

THOMSON

THOMSON DSC - 323W Manuel utilisateur

AVer

AVer FB2027 Manuel utilisateur

ENFORCER

ENFORCER EV-T5105-N2SQ Manuel utilisateur

Wansview

Wansview NC543 Manuel utilisateur

Eneo

Eneo MCB-64A0003M0A Manuel utilisateur

deView electronics

deView electronics CBDNI36F Manuel utilisateur

Swann

Swann SwannEye Manuel utilisateur

LevelOne

LevelOne IP CamSecure Manuel utilisateur

i-Flash P2DV Series Manuel utilisateur

Manuels Caméra IP populaires d'autres marques