Hyundai ImageQuest A727 Manuel utilisateur
U.S.A.
U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER
NOTE : This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet of a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
Changes or modification not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.
WE HYUNDAI ImageQuest CO., LTD.
Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA
declare under our sole responsibility that the product:
to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)
following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.
KOREA / Apr. 02, 2001HONG KI, KIM
(Place and date of issue) (Name and signature of
authorized person)
DECLARATION OF CONFORMITY
Kind of equipment : COLOR MONITOR
Type-Designation : A727
Safety : EN60950 : 1992 + A1, A2, A3, A4, A11
EMC : EN 55022/1998, EN 55024: 1998
EN 61000-3-2: 1995+A1 : 1998+A2 : 1998
EN 61000-3-3: 1995
Accredited testlaboratory:
TÜV Rheinland
Am Grauen Stein
51105 Köln
A727
Multiscanning Color Monitor
Contents
3-6. Setting the refresh rate.................8/19
Preset Timing Table.......................8/19
4. Adjusting the picture.......................9/19
4-1. Using the On Screen Display.......10/19
4-2. Direct access buttons...................10/19
4-3. OSD Adjustments.........................11/19
5. Display power management.........15/19
Reducing power consumption..........15/19
6. Troubleshooting.............................16/19
7. Specifications.................................19/19
1. Introduction ...............................1/19
2. Safety Information ...................1/19
3. Installing the monitor ..............3/19
3-1. Packing List ....................................3/19
3-2.
Fastening the swivel and tilt base ...
4/19
3-3. Selecting a suitable location..........4/19
3-4. Connecting the monitor.................5/19
3-5. Installing the driver........................7/19
3-5-1. Windows 95/98/2000...................7/19
3-5-2. Other operating systems.............8/19
A727
Multiscanning Color Monitor
1/19
1. Introduction
2. Safety Information
This manual contains instructions for installing and operating NEC CI A727.
NEC CI A727 is a highly ergonomic color display unit;
• 17” diagonal (15.7” viewable) 0.27mm dot pitch CDT
• Supporting high screen refresh rates and full scan flicker-free picture quality
• With On Screen Display menus for user control
• 100-240V AC input voltage
• VESA DPMS (Display Power Management Signaling)
• VESA DDC1/2B compatibility
When you set up and use your display unit, follow the safety instructions below.
• Do not use the display unit in humid environments like bathrooms, damp
cellars, swimming pools, etc.
• This equipment must be connected to an earthed outlet which is close to the
display unit and accessible in case you need to disconnect the display.
• Do not connect an extension cord.
• Never insert objects into the openings on the outside of the device as you can
come into contact with live electrical components. This can cause fire or give
strong electrical shocks.
• Slots in the cabinet are provided for ventilation. Do not block the ventilation
slots in the display unit cabinet.
• Do not under any circumstances open the display unit cabinet.
A727
Multiscanning Color Monitor
2/19
• To avoid risk of electric shock, do not disassemble the display unit cabinet.
The unit is not user-serviceable. Remember to unplug the display unit from the
power outlet before cleaning.
• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not
use thinner or benzene, abrasive cleaners or compressed air.
• Do not wipe the screen with a cloth or sponge that could scratch the surface.
• To clean your antistatic screen, use water and a special microfiber screen
cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean
cloth with water or a mild detergent.
• To clean display unit cabinet, use a cloth lightly dampended with a mild
detergent.
• During the transportation of the monitor, the swivel base has to be removed in
every case.
Cleaning and Maintenance
A727
Multiscanning Color Monitor
3/19
The following items should be found in the packaging.
Above power cord can be changed upon different voltage areas. Please
contact your dealer if anything is missing or damaged.
3. Installing the
monitor
3-1. Packing List
Tilt and Swivel
Compact Disc
Power cord
Monitor
Attached Signal Cable
!
A727
Multiscanning Color Monitor
4/19
3-2. Fastening the swivel
and tilt base
3-3. Selecting a suitable
location
• Place the base against the bottom of the monitor so that the base fasteners are
aligned with appropriate slots.
• Push the base towards the front of the monitor until the latch locks into
position.
• Place the monitor at least 30cm from other electrical or heat-emitting
equipment and allow at least 10cm on each side for ventilation.
• Place the monitor in a position where no light shines directly onto or is
reflected on the screen.
• To reduce eye strain, avoid installing the display unit against a bright
background such as a window.
• Position the monitor so that the top of the screen is no higher than eye level.
• Position the monitor directly in front of you at a comfortable reading distance
(around 45 to 90cm)
A727
Multiscanning Color Monitor
6/19
1. Insert the 15-pin signal cable connector to the VGA connection on your
computer and screw it down.
2. Plug the display unit’s power cable first to the back of the display unit.
3. Then plug the power cable to a 100V - 240V earthed electrical outlet or to the
system unit, if it has an outlet for the display power cable.
4. Turn on the display unit using the Soft power switch and check that the power
LED is on. If not, repeat steps 2, 3 and 4 or refer to the Troubleshooting section
of this guide.
5. Turn on the power to the computer. The picture will appear within about 15
seconds. Adjust the picture to obtain optimum picture quality. See the section
Adjusting the picture in this guide for more information.
Soft Power SwitchPower LED
Table des matières
Autres manuels Hyundai Moniteur
Hyundai
Hyundai Smartboard A S65UCAI Manuel utilisateur
Hyundai
Hyundai R329DP Series Instructions de montage
Hyundai
Hyundai L24COF080 Manuel utilisateur
Hyundai
Hyundai ImageQuest L501 Manuel utilisateur
Hyundai
Hyundai ImageQuest L72S Manuel utilisateur
Hyundai
Hyundai W240S Manuel utilisateur
Hyundai
Hyundai U90P Manuel utilisateur
Hyundai
Hyundai P227DPU Manuel utilisateur
Hyundai
Hyundai ImageQuest V570 Manuel utilisateur
Hyundai
Hyundai W240D Manuel utilisateur
Hyundai
Hyundai L91A Manuel utilisateur
Hyundai
Hyundai C17F15072 Manuel utilisateur
Hyundai
Hyundai W220D Manuel utilisateur
Hyundai
Hyundai L22C0E081 Manuel utilisateur
Hyundai
Hyundai IMAGE TUNE Q70U Instructions d'utilisation
Hyundai
Hyundai W220S Manuel utilisateur
Hyundai
Hyundai LCD Monitor U90D Manuel utilisateur
Hyundai
Hyundai C17F15090 Manuel utilisateur
Hyundai
Hyundai HYU-CC-MM32001 Manuel utilisateur
Hyundai
Hyundai U90 Manuel utilisateur
