Hytronik HBP02 Guide rapide
1. Technical Specifications
Installation and Instruction Manual
2. Installation
Protocol
4 dBm
2.4 GHz - 2.483 GHz
Operation frequency
Transmission power
Range (Typical indoor)
Protocol
10~30m
5.0 SIG
Mesh
Stand-by power
Operating voltage
<1.5W
220~240VAC 50/60Hz
Operation temperature
20% ~ 90%
Relative humidity
Ta: -20OC~ +50OC
EMC standard (EMC)
Safety standard (LVD)
Certification
EN55015, EN61000, EN61547
CB, CE , EMC, RED, RCM
EN60669-1/-2-1
AS/NZS60669-1/-2-1
RED
EN300328, EN301489-1/-17
IP20
IP rating
Free App for set-up and commissioning
3. Download the App
4. Operation
HBP02
Wire Preparation
0.75 - 4
mm
8mm
Rising clamp terminal.
To make or release the wire from the terminal, use a screwdriver
to push down the button.
35.6
12.1
Ø 56
59
59
Ø 3.4
Ø 6.8
86
N
N
HBP02
L
L
Mechanical Structure & Dimensions
Wiring Diagram
The touch panel HBP02 can keep the time runing for up to 7-8 weeks against power
failure.
▲
WARM
COOL
▲
▲
DOWN
UP
▲
Brightness
Control
Tunable
White
Control
Scenes are simply programmed using the App.
Create and name the scenes using the scenes menu, and then assign the
scenes to buttons from the device settings menu.
Scene Recall
The ON/OFF button has a configurable response via the App.
Permanent OFF (Occupancy sensor disabled).
Touch Indications
Real-time Sustainability
Three methods for successful touch indications:
Vibration / Beeper / LED indicator
User can select any one, two or all of them to indicate successful touch on HBP02 in the App.
1 2 3 4
1 2 3 4
Touch Panel with 5.0 SIG Mesh
HBP02-20210323-A0
Turning off via the ON/OFF button will suspend the entire system, including occupancy sensor.
Pressing this button again will resume the last automatic profile selected, or pressing any other
button on the control panel will wake up the system.
5.0 SIG mesh
iOS 10.0 or later
Android 5.0 or later
Web app/platform:
iot.koolmesh.com
86
Senser take over
Press this button to quit manual override mode(Sensors will take over the control).
Clean Mode
Long press this button for more than 5s to go to clean mode (during this clean mode, the touch
panel screen will be locked and does not respond to any touch), it will quit automatically after 1min.
HBP02-20210323-A0
Subject to change without notice.
5. Additional Information / Documents
1.To learn more about detailed product features/functions, please refer to
www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to
www.hytronik.com/download ->knowledge ->
Bluetooth Products - Precautions for Product Installation and Operation
3. Data sheet is subject to change without notice. Please always refer to the most recent release on
www.hytronik.com/products/bluetooth technology ->Bluetooth Accessories
4. Regarding Hytronik standard guarantee policy, please refer to
www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
Autres manuels Hytronik Écran tactile
Manuels Écran tactile populaires d'autres marques
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manuel utilisateur
YASKAWA
YASKAWA TP 610C Manuel utilisateur
B&R
B&R Power Panel C Series Manuel utilisateur
Beijer Electronics
Beijer Electronics X2 control Manuel utilisateur
AXIOMTEK
AXIOMTEK GOT321W-521 Manuel utilisateur
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manuel utilisateur
