Hysnox HY-01 Manuel utilisateur
HY-01 bluetooth headset intercom
Table of Contents
1.Introduction............................................................................................................................1
1.1 Product Descriptions........................................................................................................1
1.2 Main Functions................................................................................................................2
2.Package Contents...................................................................................................................3
3.Installation Procedure...........................................................................................................4
3.1 Installation method with plastic clamp...........................................................................4
3.2 Installation method with velcro clamp...........................................................................5
3.3Use a screw plug for the headphone cable................................................................................................5
4.Quickly remove Bluetooth headset.......................................................................................................................6
5.Functions and operation of buttons.....................................................................................................................6
5.1 Turning on/off the unit.....................................................................................................................................6
5.2 Phone Controls.....................................................................................................................................................7
5.3 Music Controls......................................................................................................................................................8
5.4 To Start FM radio.................................................................................................................................................8
5.5 Start/End the Bluetooth Intercom...............................................................................................................8
5.6 To Adjust the Volume.........................................................................................................................................9
5.7 Switching mode....................................................................................................................................................9
6.Pairing method............................................................................................................................................................10
6.1 Pairing with mobile phone............................................................................................................................10
6.2 Pairing between two headsets.....................................................................................................................10
6.3 Pairing between three headsets..................................................................................................................11
7.Function priority.........................................................................................................................................................12
8.Technical parameters of product.........................................................................................................................12
9.Battery and charging instructions.......................................................................................................................13
10.Matters needing attention....................................................................................................................................14
Warranty Service.................................................................................................................................................................
1. Introduction
1.1 Product introduction
HY-01 is a full-duplex intercom Bluetooth headset for
motorcycle riders with the design that enables clear and safe
wireless communication during riding. Compatible with all
Bluetooth mobile phones and any type of helmet, our products
paired with the mobile phones to allow the riders to receive
and unplug calls, listen to music, listen to FM radio and receive
GPS navigation voice prompts, etc., at the same time, two or
three sets of network intercom call.
1.On/Off Button 6. Indicator Light
2.Knob 7.Ear Speakers
3.Charger Socket 8.Headset Plug
4.Multi-function Button 9.Microphone
5.Headset Socket 10.Butterfly Sticker
1
1.2 Main Functions
(1) After paired with a mobile phone, our products can answer
incoming calls, reject calls or hang up calls within a visible
range of 10 meters;
(2) Our products can maintain the full-duplex intercom
between the helmet Bluetooth headsets at a distance of up to
1000 meters. When the intercom is enabled, the mobile phone
is still in the standby state with the highest priority to ensure
that no calls are missed;
(3) Our products have the function of answering calls
automatically and support last code redial;
(4) Our products support FM radio function;
(5) Our products use the knob to control the previous song and
the next song of the mobile phone music, and the
multi-function keys control playback and pause;
(6) Our products can realize automatic switching between
mobile phone calls, intercom calls, stereo music and FM radio;
(7) Our products use DSP to eliminate noise (wind noise) to
ensure clear voice quality during high-speed driving;
(8) The waterproof and sunscreen design of the whole machine
is durable, and the waterproof grade reaches IP66.
2
2. Package Contents
1.Bluetooth Device 6.Headphone Velcro
2.Microphone&Ear Speakers 7.USB Cable
3.Velcro Clamp 8. Screw Driver
4.Hook and loop fasteners 9.Manual
5.Clamp
3
3. Installation Procedure
3.1 Installation method with plastic clamp
①Loosen the screws on the back of clamp with the provided
screw driver.
②Open the lining of helmet,insert the clamp in the proper
position on the left of helmet and fasten the screw(overly
fastened screw can damage the clamp)
③Slide the receiver down into the slots on the headset clamp
mount.Make sure that it is locked in securely.
④Open the lining of helmet(at ear 's position),clean the EPS
surface and affix the Velcro on with the rough surface.
⑤Affix the hook surface of earphone to the rough surface of
Velcro and properly tidy the helmet lining.
⑥Insert the headphone plug into the corresponding
headphone jack on the receiver to finish the installation.
4
3.2 Installation method with velcro clamp
You can directly use the Velcro to mount the bluetooth device
on the edge of helmet. See the following pictures.
①Tear off the white paper on velcro and stick the velcro onto
clamp&helmet
②Stick the clamp with velcro onto helmet
③Slide the receiver down into the slots on the headset clamp
mount.Make sure that it is locked in securely.
3.3Use a screw plug for the headphone cable
Put the earphone cord plug buckle on, then put in two screws,
tighten the plug with a screwdriver; if you want to pull out the
earphone plug ，first unscrew the screw with a wrench to
remove the buckle, and then pull out the earphone; Do not Pull
out the headset directly with brute force.
5
4. Quickly remove Bluetooth headset
①Remove the headphone
②Remove the device from clamp(along the arrow direction in
fingure)
③Remove the clamp from helmet(along the arrow direction in
fingure)
5.Functions and operation of buttons
5.1 Turning on / off the unit
On:Press the On/Off Button for 3 seconds until you hear a
“Di”.The blue light will flash 3 times swiftly and then turn into
regular intervals.
Off:Press the On/Off Button for 5 seconds until you hear a
“Di”.The blue light will be on for a while and then die out.
6
5.2 Phone Controls
①To answer a call –Briefly press the Multi-function button
once.
②Auto receive call –Dependant on the phone the unit will
automatically answer the call after 15 seconds of ringing.
③To reject a call –Press the Multi-function button and hold
until you hear a “Du”(around 3 seconds).
④To end a call –Whilst call is active Briefly press the
Multi-function button once.
⑤Last number redial –When in standby mode. Press and hold
the Multi-function button for 2 seconds until you hear a “Du”.
Note: Depending on the phone some or all of these functions
may not work, or operate differently.
7
Table des matières
