Hypertherm HT2000 Manuel de référence

THC Motherboard Relay

Replacement

Kit: 128404

Field Service Bulletin

IM-356

(P/N 803560)

Revision 0 April, 1999

Hypertherm, Inc.

Hanover, NH

http://www.hypertherm.com

email:[email protected]

Hypertherm, HyDefinition, HT, HyLife, LongLife, MAX, PAC and Powermax are trademarks of Hypertherm, Inc.,

and may be registered in the United States and/or other countries

Hypertherm Offices Worldwide

Hypertherm, Inc.

Etna Road, P.O. Box 5010

Hanover, NH 03755 USA

Tel.: (603) 643-3441 (Main Office)

Fax: (603) 643-5352 (All Departments)

Tel.: (800) 643-9878 (Technical Service)

Tel.: (800) 737-2978 (Customer Service)

Hypertherm Plasmatechnik GmbH

Technologiepark Hanau

Rodenbacher Chaussee 6

D–63457 Hanau-Wolfgang, Germany

Tel.: 49 6181 58 2100

Fax: 49 6181 58 2134

European Technical Support Organization (ETSO)

Technologiepark Hanau

Rodenbacher Chaussee 6

D–63457 Hanau-Wolfgang, Germany

Tel.: 49 6181 58 2100

Fax: 49 6181 58 2134

Hypertherm Singapore Pte Ltd

No. 19 Kaki Bukit Road 2

K.B. Warehouse Complex

Singapore 417847, Republic of Singapore

Tel.: 65 841 2489

Fax: 65 841 2490

Hypertherm U.K.

9 Berkeley Court • Manor Park

Runcorn, Cheshire, England WA7 1TQ

Tel.: 44 1928 579 074

Fax: 44 1928 579 604

France

10, Allée de I’lsara

F-95000 Cergy-Pontoise, France

Tel.: 33 1 34 24 03 05

Fax: 33 1 34 25 09 64

Italy

Via Torino 2

20123 Milan, Italy

Tel.: 39 02 725 46 312

Fax: 39 02 725 46 400

THC Motherboard Up / Down DC Relay Replacement

Page 1

Field Service Bulletin 803560

WARNING

ELECTRIC SHOCK CAN KILL

MODIFICATION MUST BE PERFORMED ONLY BY HYPERTHERM TECHNICIANS,

DISTRIBUTORS OR QUALIFIED ELECTRONICS TECHNICIANS

HT2000, HT2000LHF, MAX200, HT4100: Push the OFF (0) button on the power

supply and turn the main disconnect switch OFF before removing the front panel of the

power supply.

HT4001: Position the ON/OFF circuit breaker on the rear of the power supply to the

OFF (O) position and turn the main disconnect switch OFF before removing the rear

panel of the power supply.

128404 Kit Contents

Part No. Description Qty

003111 Relay: .02-1A@10-200 VDC, Solid State 2

803560 FSB: THC Motherboard Up/Down DC Relay Replacement 1

INTRODUCTION

This field replacement kit is for customers that have an HT4001, HT4100, HT2000, HT2000LHF or MAX200

power supply with the on-board torch height (THC) control system, and who need to interface the THC torch

UP/DOWN motion signals with a DC torch-lifter motor.

THC Motherboard Up / Down DC Relay Replacement

Page 2

Field Service Bulletin 803560

Relay Replacement

The stock THC motherboard comes with AC relays for torch UP and DOWN control. These 2 relays, CR2 and

CR3 must be removed from the motherboard and replaced with the 003111 DC relays from this kit.

HT2000, HT2000LHF, MAX200, HT4100:

1. Remove the power supply front panel.

HT4001:

1. Remove the power supply rear panel.

All Systems:

2. Locate the THC motherboard.

3. Remove 4 screws that fasten the plastic THC cover to the THC pcb assemblies.

THC Motherboard

Remove screws

THC Motherboard Up / Down DC Relay Replacement

Page 3

Field Service Bulletin 803560

4. Locate CR2 and CR3 on the THC motherboard.

CR2

CR3

5. Remove the screws securing CR2 and CR3 to the motherboard.

6. Gently pull the CR2 and CR3 relays from their sockets.

7. Insert the 003111 relays into the motherboard sockets.

8. Reinstall the CR2 and CR3 screws to secure the 003111 relays to the motherboard.

9. Refasten the THC plastic cover to the THC motherboard.

10. Reinstall the power supply covers.

Installation is complete. Refer to your system instruction manual to connect the machine interface cable to the

torch lifter motor.

Autres manuels pour HT2000

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hypertherm Système de soudage

Hypertherm

Hypertherm Powermax125 Manuel utilisateur

Hypertherm

Hypertherm PAC500 Manuel utilisateur

Hypertherm

Hypertherm Powermax105 Manuel de référence

Hypertherm

Hypertherm Powermax30 AIR Manuel de référence

Hypertherm

Hypertherm Powermax125 Manuel utilisateur

Hypertherm

Hypertherm Powermax30 AIR Manuel de référence

Hypertherm

Hypertherm HT40C Manuel utilisateur

Hypertherm

Hypertherm Powermax 65 Manuel utilisateur

Hypertherm

Hypertherm H65 Manuel utilisateur

Hypertherm

Hypertherm powermax800 Manuel utilisateur

Hypertherm

Hypertherm HyPerformance Plasma HPR800XD Manuel utilisateur

Hypertherm

Hypertherm powermax65 Manuel utilisateur

Hypertherm

Hypertherm Powermax30 AIR Manuel utilisateur

Hypertherm

Hypertherm Powermax30 AIR Manuel utilisateur

Hypertherm

Hypertherm HyDefinition HD3070 Manuel utilisateur

Hypertherm

Hypertherm Powermax30 AIR Manuel de référence

Hypertherm

Hypertherm Powermax45 XP Manuel utilisateur

Hypertherm

Hypertherm Powermax45 XP Fiche technique

Hypertherm

Hypertherm powermax1000 Manuel utilisateur

Hypertherm

Hypertherm Powermax45 XP Manuel de référence

Hypertherm

Hypertherm MAX42 Manuel utilisateur

Hypertherm

Hypertherm powermax 350 Manuel utilisateur

Hypertherm

Hypertherm Powermax30 AIR Manuel utilisateur

Hypertherm

Hypertherm HyPerformance HPR130XD Manuel utilisateur

Manuels Système de soudage populaires d'autres marques

Berner

Berner PLASMACUT 54 Manuel utilisateur

Pro Spot

Pro Spot PR-155 Manuel utilisateur

Forney

Forney 210 Manuel utilisateur

Thermal Arc

Thermal Arc 400S Manuel utilisateur

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuel utilisateur

GYS

GYS PROTIG 201 AC/DC Manuel utilisateur

TAFA

TAFA 30*8B35 Manuel utilisateur

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuel utilisateur

ESAB

ESAB Buddy Arc 145 Manuel utilisateur

CIGWELD

CIGWELD 636804 Guide rapide

Red-D-Arc

Red-D-Arc DC-400 Manuel utilisateur

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuel utilisateur

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuel utilisateur

WIA

WIA Weldmatic 270 CP132-2 Manuel utilisateur

Sonics

Sonics H520T Manuel utilisateur

Miller

Miller Big Blue 400D Manuel utilisateur

NewArc

NewArc RT2000 Guide de démarrage rapide

Lincoln Electric

Lincoln Electric POWER WAVE I400 Manuel utilisateur