HyperChiller V2 Manuel utilisateur
®
Iced Coffee Maker
Instruction Manual
CAUTION: ENSURE THAT THIS DEVICE IS STABLE AND SECURE AS YOU SLOWLY AND
CAREFULLY POUR HOT LIQUID INTO THE DEVICE. DO NOT ALLOW ANY LIQUID TO
OVERFLOW FROM OR POOL ON THE TOP OF THE VESSEL. BE SURE THAT THE
LIQUID DRAINS FROM THE TOP COMPLETELY BEFORE YOU CONTINUE POURING
LIQUID INTO THE CHAMBER. DO NOT OVERFILL.
Customer Service Contact:
sales@hyperchiller.com
Hyperbius, Inc.
8140 Belvedere Rd Ste 4
West Palm Beach, FL 33411
90-Day Limited Warranty
Product made in China
HyperChiller® is a registered
trademark of Hyperbius, Inc.
Patented: U.S. Patent No. 9,920,983
and other international patents pending
Product Info:
Capacity: 12.5 fl. oz.
Note: Product can be used twice
before requiring refreezing
Dimensions:
4.25” diameter x 6.75” height
Materials:
Food grade stainless steel
BPA free Polypropylene plastic
Care:
Top rack dishwasher safe
2
IMPORTANT - WASH BEFORE USE
(Top shelf dishwasher safe)
Contents:
1. Lid
2. Small stainless steel cup
3. Large stainless steel cup
4. Black HyperChiller cup
Note: The small stainless steel cup
nests inside the large stainless cup.
Both cups can be attached and
detached from the lid by twisting.
3
1.
2.
3.
4.
4
Initial Assembly Instructions:
Fill large stainless steel cup
with water up to the indented
mark (2a), and empty contents
into the black HyperChiller cup.
Fill small stainless steel
cup with water up to
the indented mark (1a),
and twist on to the lid.
1
1a
2
2a
5
3
Twist empty large stainless
steel cup on to the lid.
Twist lid assembly to black
HyperChiller cup, and place
upright in the freezer until solid
(up to 12 hours).
4
6
Instructions for daily use:
Note: It is OK to pour liquid over the vent on the recessed area of the lid.
During use it enables air to escape from the ice chamber, so you may see
small bubbles coming from it
Also, once frozen, there is no need to take the product apart for regular use.
Step one: Brew fresh coffee directly onto the recessed area of
the HyperChiller’s lid with your compatible single cup brewer,
or carefully pour it in with a carafe. Liquid will flow through the
opening at the bottom of the lid, and into the cooling chamber.
-or-
Step two: After the coffee is inside the HyperChiller, gently swirl
the product every few seconds to keep the coffee moving.
Step three: In as little as one minute,
the coffee will have cooled off by up
to 130°+. Now, pour via the spout
in the other side of the lid into your
regular glass over ice, and enjoy!
Note: Cooling time requirements vary based
on freezer temp, initial liquid temp & volume,
as well as whether the product is swirled or not.
Please refer to ‘Cooling Times’ chart on pg 8.
Step four: To get it ready for your next use, simply pour some fresh
water through the lid (as you did with coffee), and then pour it back
out into the sink. Lastly, dry off condensation from the outside, and
put the product back in the freezer in an upright position.
7
WARNING: USE CAUTION WHEN CHILLING HOT LIQUIDS.
8
HyperChiller Cooling Times
Swirling Resting
Small* (6 oz) 60 seconds 2 minutes
Medium* (8 oz) 60 s 2 min
Large* (10 oz) 60 s 3 min
Ex Large* (12 oz) 90 s 3 min
Wine (6 oz) 30 s 60 s
Spirits (3 oz) 30 s 60 s
*If you want to enjoy your coffee ice cold, without ice in your
drink, add 60+ seconds to the corresponding cooling time.
General Information:
Periodically, the product should be taken apart and
thoroughly washed. All parts are top shelf dishwasher safe.
For a demo video of product assembly & use go to:
https://hyperchiller.com/pages/how-it-works-video
Table des matières
Autres manuels HyperChiller Cafetière
