HYCON HY10000-WK09 Manuel utilisateur
HY10000-WK09
Integrated Writer User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HYIDE020-V01_EN
page2
Table of Contents
1. PACKAGE CONTENTS............................................................................................................................4
2. SAFETY PRECAUTIONS.........................................................................................................................5
3. SOFTWARE INSTALLATION REQUIREMENTS.....................................................................................6
3.1. Software Installation Requirements......................................................................................................6
3.2. Hardware online automatic update.......................................................................................................7
3.3. Hardware online manual update.........................................................................................................10
4. WRITER ARCHITECTURE..................................................................................................................... 11
4.1. Architecture Description...................................................................................................................... 11
4.2. Appearance introduction.....................................................................................................................11
4.3. Operating instructions.........................................................................................................................12
4.4. Description of Writer Characteristics...................................................................................................15
4.5. Cautions..............................................................................................................................................16
4.6. Program burning instructions..............................................................................................................17
5. REVISIONS.............................................................................................................................................19
.
HY10000-WK09
Integrated Writer User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HYIDE020-V01_EN
page3
Attention:
1. HYCON Technology Corp. reserves the right to change the content of this datasheet
without further notice. For most up-to-date information, please constantly visit our
website: http://www.hycontek.com.
2. HYCON Technology Corp. is not responsible for problems caused by figures or
application circuits narrated herein whose related industrial properties belong to third
parties.
3. Specifications of any HYCON Technology Corp. products detailed or contained herein
stipulate the performance, characteristics, and functions of the specified products in the
independent state. We do not guarantee of the performance, characteristics, and
functions of the specified products as placed in the customer’s products or equipment.
Constant and sufficient verification and evaluation is highly advised.
4. Please note the operating conditions of input voltage, output voltage and load current
and ensure the IC internal power consumption does not exceed that of package
tolerance. HYCON Technology Corp. assumes no responsibility for equipment failures
that resulted from using products at values that exceed, even momentarily, rated values
listed in products specifications of HYCON products specified herein.
5. Notwithstanding this product has built-in ESD protection circuit, please do not exert
excessive static electricity to protection circuit.
6. Products specified or contained herein cannot be employed in applications which
require extremely high levels of reliability, such as device or equipment affecting the
human body, health/medical equipment, security systems, or any apparatus installed in
aircrafts and other vehicles.
7. Despite the fact that HYCON Technology Corp. endeavors to enhance product quality
as well as reliability in every possible way, failure or malfunction of semiconductor
products may happen. Hence, users are strongly recommended to comply with safety
design including redundancy and fire-precaution equipment to prevent any accidents
and fires that may follow.
8. Use of the information described herein for other purposes and/or reproduction or
copying without the permission of HYCON Technology Corp. is strictly prohibited.
.
HY10000-WK09
Integrated Writer User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HYIDE020-V01_EN
page4
1. Package Contents
HY10000-WK09 integrated writer is a tool for connecting PC to program the chips. As
shown in Figure 1-1, HYCON HY10P/HY11P/HY12P/HY13P/HY15P/HY17P/HY17M series
products can be programmed through the integrated writer, the related hardware is
equipped as shown below:
No.
Model No.
Description
Quantity
HY10000-WK09
1. HY10000-WK09
Integrated Writer
1
2. Cable line
USB Type A to Type B Cable
1
3. Programming line
6pin/2.5(2.5mm pitch)
1
4. Power Supply
Output: DC 5V
1
Figure 1-1
.
HY10000-WK09
Integrated Writer User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HYIDE020-V01_EN
page5
2. Safety Precautions
Do not place heavy objects on the display panel, in order to avoid damage caused by
stress.
Place the application display boards at steady place, so as to avoid falling damage.
Do not use this product with the input voltage which is not meeting the electrical
specifications, in order to avoid working abnormally or damage.
Avoid application display boards being touched by liquid, dirt and avoid being exposed
to moisture during operation. This application should be kept in a dry environment, so
as not to affect the function and performance.
Remove the power supply when not using it.
When following status occurred, please remove the power supply immediately, and
contact our engineer.
Power Supply line is worn or damaged.
Power source (battery) connected but no any light on while operating.
Component off.
.
HY10000-WK09
Integrated Writer User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HYIDE020-V01_EN
page6
3. Software Installation Requirements
3.1. Software Installation Requirements
Minimum system configuration required to run the burner application IDE & HexLoader:
(1) PC/NB hardware requirement:
IBM PC compatible X86 system CPU
512MB memory (1GB recommended)
1GB Hard disk
(2) Supported Products:
HY10P/11P/12P/13P/15P/16F/17P/HY17M series products
(3) Supported Hardware Model No.:
HY10000-WK09 writer kit
(4) Supported software version:
Support 8bit OTP IDE’s software version
HYCON 8bit Writer V1.0.4(including) above
HY16F Writer V3.9.2(including) above
(5) Supported Operating system:
Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10
(6) Apply the following interface modes:
USB Port with "HID-compliant device"
The HY10000-WK09’s USB Port driver uses the Windows standard
"HID-compliant device" (Figure 3-1), there is no need to install another USB driver.
Figure 3-1
.
HY10000-WK09
Integrated Writer User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HYIDE020-V01_EN
page7
3.2. Hardware online automatic update
HY10000-WK09 integrated writer supports HY10P/11P/12P/13P/15P/16F/17P/HY17M
series products. Each time the internal firmware is converted, it is only applicable to one
series of products. Before switching between different firmware, you can check the current
firmware supported writer through the "information 1" message.
The integrated writer needs to cooperate with the download software, which can
automatically convert the internal firmware of the burner to support the burning of different
series of products. The usage methods are as follows:
3.2.1 Automatically convert firmware with HYCON 8bit Writer
Connect the integrated writer to the computer via a USB cable,
open software , the interface will be shown in Figure 3-2,
click "Chip Type" and click "Load"load the corresponding HEX file, then click the
"Download to Burner" button, the software will detect the firmware version of the
burner, if it does not support the current chip, it will be automatically upgraded, as
shown in Figure 3-3.
Figure 3-2
.
HY10000-WK09
Integrated Writer User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HYIDE020-V01_EN
page9
3.2.2 Automatically convert firmware with HY16F Writer
Connect the integrated writer to the computer via a USB cable, open the software
, as shown in Figure 3-4, select "Connect Burner Only" in the Connect
drop-down box, and select the chip model in the pop-up selection dialog box. At this time,
the software will detect the burner Firmware version, if the current chip is not supported, an
upgrade dialog box will pop up, select "Yes (Y)" to automatically upgrade, as shown in
Figure 3-5.
Figure 3-4
Figure 3-5
.
HY10000-WK09
Integrated Writer User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HYIDE020-V01_EN
page10
3.3. Hardware online manual update
The integrated writer also supports online manual firmware conversion to support the
burning of different series of products. Currently, only the manual conversion of HY16F
firmware is supported. The usage methods are as follows:
Connect the integrated programmer to the computer via a USB cable. Then open the
software , click the "Function" button in the upper right corner of the software,
and select "Update Firmware" in the drop-down box. And selecting the chip model, clicking
"Update" will automatically Upgrade, as shown in Figure 3-6.
Figure 3-6
.
Table des matières
